Professional Documents
Culture Documents
ALM New
ALM New
ALM New
In test plan tree, u want to define a filter for associated test sets as “Open” and this is to ensure
that only tests that belong to an open test set are displayed
Multiple
Triple
Cross
Double
2. In test plan module when a called test has parameters, then when can you assign values to the
parameters?
Values must be assigned when the test is called during test design
3. From which tabs in the test lab module can you add tests to test set
4. Deleting the requirement doesn’t delete its child requirement, requirement traceability, defects
linkage and hence requests him not worry
True
False
5. Project is in critical phase and due to application instantly, plenty of defects were raised which
need to be fixed. But the challenge is lack of developers to fix the defects and turn around time
is also less. Hence mark gets the suggestion from the PM to generate the report
Pull all the showstopper and critical defects with open status by graph wizard with graph types
as Entity and Entity as Defect
Pull all critical defects with open status from business view reports
Pull all open defects from business view reports
Pull all showstopper and critical defects with open status from business view report
6. Susan working on test design related activity in Test Plan module and she is expected to
leverage test configuration to cover multiple requirement and avoid unnecessary duplications
By associating different test configuration in the same test with each requirement
By associating same test configuration in the same test with each requirement
By associating same test configuration in the multiple test with each requirement
7. Jamie is the QA lead for a banking based project. during system testing phase he and his team
member are expected to perform test execution and post test result as per the schedule. Test
execution was completed by Jamie’s team and they raised defect against discrepancies
Francise want to witness the test execution log and results along with testers contribution in
test execution.she logs into HPALM and for some requirements , she notice the status of not
completed as requirement coverage status.
Give the scenario what should francise infer for the requirement coverage status of not
completed
a) None of the test can have execution status of no run
b) None of the test can have execution status of blocked
c) None of the test can have execution status of passed
d) Almost one test has on execution status of Failed
8. You are expected to design test for both functional and non functional requirements for a
project in test plan module
1. LOAD-TEST
2. CAPACITY-TEST
3. BLACK-BOX-TEST
4. LR-SCENARIO
5. QUICK TEST
6. MANUAL
a. Option 4 5 6
b. Option 1 2 3
c. Option 3 4 5
d. Option 2 3 4
9. Susane is QA tester working for stock market based application where the direct business
impact is huge and hence testing is very crucial for the success of the project. Hence the
business had laid down the enough focus in ensuring 100% end-to-end test .Traceability across
SDLC phase
Give the scenario and guidliness mentioned by the business .what level of traceability susane
maintain in HPALM. To ensure no gap?
a. Link all requirements to reports and graphs
b. Link requirement to releases
c. Link all defects to requirement or test
d. Link all tests to requirement or vise versa
10.
True
False
12. What does each test set folder to a cycle enable you to do in test lab module?
A. Group together test sets that will be run during the same cycle and analyze the progress of
the cycle as you run your tests
B. Separate test sets that will be run during the same cycle and analyze the progress of the cycle as
you run your tests
C. Group together test sets that will be run during different cycles and check the global requirements
D. Separate test sets that will be run during the same cycle and check the global requirements
13. Which of the given statement are true, regarding progress and summary graph for defect by status
15.
16. To increase the flexibility and power of a test, you can add ________ to the called test and
to the tests that call it.
A. Input Values
B. Output Values
C. Parameters
D. None of above
17. You can add a new defect to a Quality Center project from any module at any stage of the testing process.
A. True
B. False
18. Requirement topics are recorded in the Requirements module by creating a requirements
_________
A. Requirement Graph
B. Requirement Tree
C. Requirement Path
D. Requirement Plan
E. Requirement Cycle
19.
a) You can only remove direct links from the Linked Defects grid.
b) Indirect links are removed automatically when the direct links are removed.
20. While reviewing and deciding which new defects need to be fixed, the QAmanager
assigns them to the appropriate __________
In the Test Plan module, which graph enables you to correlate the number of tests and the
elapsed time interval?
A. Tests Summary graph
B. Tests Results graph
C. Tests Trend graph
D. Tests Progress graph
There are two methods you can use to create tests from requirements:
A. Convert Requirements to Tests & Generate a Test from Requirements
B. Convert Requirements to Tests & Convert a Test from Requirements
C. Convert Requirements to Tests & Generate a Requirement from Tests
D. Convert a Test from Requirements & Generate Requirements to Tests
When a requirement changes, Quality Center alerts the affected requirements. The alerts can
be seen by______
A. Author of the requirement
B. Users authorized by the Author of the requirement
C. All users
D. Administrator
A. Test Plan
B. Test Resources
C. Dashboard
D. Requirements
If the QA manager would like to see an overview of status of the tests within folder in the Test
Plan Tree, which graph would you generate?
A. Live Analysis
B. Defect Age Graph
C. Coverage Analysis
D. Test Plan Summary
Which module enables you to define graphs and reports?
Test Plan
B. Test Resources
C. Dashboard
D. Requirements