Professional Documents
Culture Documents
Hydrotrac GFT: Track Drives For Mini-And Medium Excavators
Hydrotrac GFT: Track Drives For Mini-And Medium Excavators
Hydrotrac GFT: Track Drives For Mini-And Medium Excavators
Medium Excavators
HYDROTRAC GFT
RE 77 109 12.98
RE 77 109 12.98
Description
The track drives for mini- and medium-sized excavators are ex- tempered quality. Sturdy antifriction bearings ensure smooth
tremely compact drive components with integrated hydraulic running of components.
motor especially developed for this application. The planetary The parking brake is integrated into the hydraulic motor. It
gear is made of high-grade materials. The teeth of the plane- serves as parking brake and is applied automatically if the pre-
tary and sun gears have been hardened and ground. The ring set working pressure is fallen short of.
gear that also serves as gearbox housing is of quenched and
Special Features:
• compact, space-saving, planetary gear • easy oil change
design • high starting torque efficiency
• robust bearing system absorbing the • shockless acting secondary valves
proportional machine weight
• low-noise running
• integrated parking brake (excluded in GFT 3)
• simple mounting
2 HYDROTRAC GFT
RE 77 109 12.98
L1
drain port T M14 x 1,5 L2 L3
service port A, B
GFT 3-4-7 M22x1,5
GFT 9 M27x2
pilot port X
GFT 3-4-7 M14x1,5 d1 d2
GFT 9 M12x1,5
D 3 h8
D4
D 6 h8
D1
D5
D2
Type D1 D2 D3 D4 D5 D6 d1 d2 L1 L2 L3 Weight
approx.
mm kg
GFT 3 T2 215 192 165 252 232 210 9x M12 12x M12 284 60 102 32
GFT 4 T2 215 192 165 252 232 210 9x M12+4 12x M12 294 70 102 38
GFT 7 T2 262 240 200 284 260 230 9x M14 8x M16 310 58 149 50
GFT 9 T2 268 244 210 284 260 230 12x M14 8x M16 325 60 149 67
HYDROTRAC GFT 3
RE 77 109 12.98
Table of Values
(theoretical values, without considering ηmin and ηv; values
rounded)
GFT 3 T2 - A10VT 18
Ratio i 43.6 55.3
Motor displacement Vg max cm3 18 18
Vg min cm3 9 9
Max. torque parking brake TBr Nm without brake without brake
Total displacement Vg total cm3/rev. 785 995
Motor speed Vg max n1 rpm 4200 4200
Vg min n1 rpm 5400 5400
Output speed Vg max n2 rpm 96,3 76,0
Vg min n2 rpm 123,9 97,7
Flow at nmax qv max l/min 76 76
Pressure ∆p bar 240 190
Motor torque T1 max Nm 69 54
Output torque T2 max Nm 3000 3000
GFT 4 T2 - A10VT 28
Ratio i 43.6 55.3
Motor displacement Vg max cm3 28 28
Vg min cm3 14.2 14.2
Max. torque parking brake TBr Nm 42 42
Total displacement Vg total cm3/rev. 1221 1548
Motor speed Vg max n1 rpm 3600 3600
Vg min n1 rpm 4600 4600
Output speed Vg max n2 rpm 82.6 65.1
Vg min n2 rpm 105.5 83.2
Flow at nmax qv max l/min 101 101
Pressure ∆p bar 206 163
Motor torque T1 max Nm 92 72
Output torque T2 max Nm 4000 4000
GFT 7 T2 - A10VT 28
Ratio i 47.6 55.3
Motor displacement Vg max cm3 28 28
Vg min cm3 14.2 14.2
Max. torque parking brake TBr Nm 42 42
Total displacement Vg total cm3/rev. 1333 1548
Motor speed Vg max n1 rpm 3600 3600
Vg min n1 rpm 4600 4600
Output speed Vg max n2 rpm 75.6 65.1
Vg min n2 rpm 96.6 83.2
Flow at nmax qv max l/min 101 101
Pressure ∆p bar 330 284
Motor torque T1 max Nm 147 127
Output torque T2 max Nm 6993 7000
GFT 9 T2 - A10VT 45
Ratio i 38.3 47.6
Motor displacement Vg max cm3 45 45
Vg min cm3 22.9 22.9
Max. torque parking brake TBr Nm 215 215
Total displacement Vg total cm3/rev. 1725 2142
Motor speed Vg max n1 rpm 3100 3100
Vg min n1 rpm 3800 3800
Output speed Vg max n2 rpm 80.8 65.1
Vg min n2 rpm 99.1 79.8
Flow at nmax qv max l/min 140 140
Pressure ∆p bar 330 279
Motor torque T1 max Nm 236 200
Output torque T2 max Nm 9053 9500
HYDROTRAC GFT 4
RE 77 109 12.98
Control Devices
Standard:
Without parking
brake
with relief valve
X T
Standard:
With parking brake
and relief valve
X T
Standard:
With parking brake
and relief valve
X T
5 HYDROTRAC GFT
RE 77 109 12.98
Hydrostatic Drives
• HYDROTRAC GFT
for the traversing and movement
of mobile equipment, with integrated
hydraulic motors of Hydromatik make,
and multiple-disk parking brake.
Output torques
from 2 to 330 kNm
See catalogue RE 77109/77110
Winch Drives
• MOBILEX GFT – W
for the space-saving integration
into winch drums.
available drive configurations
• with end supporting bearing
• with winch support
• with rope drum
for rope pull forces of
up to 580 000 kg
See catalogue RE 77502
LOHMANN + STOLTERFOHT GmbH Dimensions and technical data indicated are sub-
Mannesmannstraße, D-58455 Witten ject to change to reflect innovations. Only appli-
cable installation drawings shall be considered
Postfach 1860, D-58408 Witten obligatory.
Tel. +49 (0)2302 877-425
Telefax +49 (0)2302 877-335
E-Mail: info@lus.de