Professional Documents
Culture Documents
Lower Dome Wall Generator End (160-13) Global Input Data
Lower Dome Wall Generator End (160-13) Global Input Data
Data Type
1. Rating of Condenser mw MW 500 B/G
2. LBTP of Condenser lbtp mm 14630 B/G
3. Elevation of TG Center Line TgCl mm 18000 B/G
4. Length of condenser neck CneckL mm 8700 A/G
5. Width of condenser neck CneckW mm 6600 A/G
6. Width of condenser Shell CsW mm 8660 A/G
2
7. Water side Design Pressure WsDP kg/cm g 5.0 A/G
8. Water side Test Pressure WsTP kg/cm2g 7.5 A/G
9. Size of bolts of water box/ water chamber WbBs mm 36 A/G
10. Elevation of Water boxes Horizontal center line WbCL mm 3800 B/G
11. Height of Water Boxes With flange WbHt mm 6500 B/G
12. Distance of Lower Dome Walls & Upper Dome LdwUEL mm 5300 A/G
Joint from TG Center line
13. Distance of lower I-beam of Lower dome from TG LdwLIb mm 9550 B/G
Center line
14. Distance of Middle I-beam of Lower dome from LdwMIb mm 7350 B/G
TG Center line
15. Distance of Upper I-beam of Lower dome from TG LdwUIb mm 5770 B/G
Center line
16. Inclination of condenser from horizontal IcAng deg 0.5 A/G
A – Advance User Input B - Basic user input G – Global input P - Input taken by program other than 1
expressions
Lower Dome Wall Generator End (160-13), Var.0.1
Nozzles:
Fittings:
Material :
Plates:
A – Advance User Input B - Basic user input G – Global input P - Input taken by program other than 2
expressions
Lower Dome Wall Generator End (160-13), Var.0.1
Round Bar:
Pipes :
I-Beam:
Plate Flange:
A – Advance User Input B - Basic user input G – Global input P - Input taken by program other than 3
expressions
Lower Dome Wall Generator End (160-13), Var.0.1
Lifting Lug:
Gusset Plate:
I-Beam:
Welding Edge:
105. Weld root for above 5mm and less than 10mm Plates Wr1 mm 1 P
106. Weld root for less than 50mm Plates Wr2 mm 2 P
107. Weld root for more than 50mm Plates Wr2 mm 3 P
108. V-Butt welding Edge angle Edge1 deg 30 P
A – Advance User Input B - Basic user input G – Global input P - Input taken by program other than 4
expressions
Lower Dome Wall Generator End (160-13), Var.0.1
A – Advance User Input B - Basic user input G – Global input P - Input taken by program other than 5
expressions