Professional Documents
Culture Documents
Add Celselresel Set DRD Add Interfreqncell Add Cac Set Idlemodetimer Set Connmodetimer Irat Ho Parameter Add Cellhsdpa
Add Celselresel Set DRD Add Interfreqncell Add Cac Set Idlemodetimer Set Connmodetimer Irat Ho Parameter Add Cellhsdpa
Add Celselresel Set DRD Add Interfreqncell Add Cac Set Idlemodetimer Set Connmodetimer Irat Ho Parameter Add Cellhsdpa
SET DRD
ADD INTERFREQNCELL
ADD CAC
SET IDLEMODETIMER
SET CONNMODETIMER
IRAT HO PARAMETER
ADD CELLHSDPA
INDEX
Set RNC Oriented DRD Algorithm Parameters(SET DRD)
Function
Note
Parameter
Example
Function
Note
None.
Parameter
ID Name
CodeBalancingDrdSwitc
h Code balance drd switch
DeltaCodeOccupiedRat
e Delta code occupied rate[%]
Example
To set the RNC-oriented DRD algorithm parameters, run the following command:
SET DRD: ServiceDiffDrdSwitch=ON;
After the command is run, the [ServiceDiffDrdSwitch] parameter is set to ON.
ers(SET DRD)
Description
Value range: ON, OFF.
Physical unit: None.
Content: This parameter specifies whether the service differential DRD algorithm will be applied.
- ON: The service differential DRD algorithm will be applied.
- OFF: The service differential DRD algorithm will not be applied.
Recommended value: OFF.
Value range: ON, OFF.
Physical unit: None.
Content:This parameter specifies whether the load balancing DRD algorithm will be applied for services
carried on DCH.
- ON: The load balancing DRD algorithm will be applied.
- OFF: The load balancing DRD algorithm will not be applied.
Recommended value: OFF.
Value range: ON, OFF.
Physical unit: None.
Content: This parameter specifies whether the load balancing DRD algorithm will be applied for services
carried on HS-DSCH.
- ON: The load balancing DRD algorithm will be applied.
- OFF: The load balancing DRD algorithm will not be applied.
Recommended value: OFF.
Value range: Power~1, UserNumber~0
Physical unit: None.
Content: This parameter specifies which choice the load balancing DRD algorithm will be applied.
- Power: Power(Downlink none-HSDPA power is used for services carried on DCH, and downlink HSDPA
guarantee power is used for services carried on HS-DSCH)will be applied to the load balancing DRD
algorithm.
- UserNumber: User number(Downlink R99 equivalent user number is used for services carried on DCH, and
downlink HSDPA user number is used for services carried on HS-DSCH)will be applied to the the load
balancing DRD algorithm.
Recommended value: UserNumber.
Value range: OFF~0, Only_To_Inter_Frequency~1, Allowed_To_Inter_RAT~2.
Physical unit: None.
Content: This parameter specifies the RRC redirection strategy.
- OFF: RRC redirection is not allowed.
- Only_To_Inter_Frequency: Only RRC redirection to inter-frequency cells is allowed.
- Allowed_To_Inter_RAT: RRC redirection to inter-frequency cells and redirection to inter-RAT cells are both
allowed.
Recommended value: Only_To_Inter_Frequency.
Value range: 0~100.
Physical value range: 0%~100%.
Physical unit: %.
Content: This parameter specifies the threshold of remanent load offset between the current cell and the
target cell when load balancing DRD is applied for DCH users. Only when the remanent load offset reaches
this threshold can a neighboring cell be selected as a candidate DRD cell for DCH users.
Recommended value: 10.
Value range: 0~100.
Physical value range: 0%~100%.
Physical unit: %.
Content: This parameter specifies the threshold of remanent load offset between the current cell and the
target cell when load balancing DRD is applied for HSDPA users. Only when the remanent load offset
reaches this threshold can a neighboring cell be selected as a candidate DRD cell for HSDPA users.
Recommended value: 10.
Value range: 0~100.
Physical value range: 0%~100%.
Physical unit: None.
Content: This parameter specifies the downlink load threshold to trigger load balancing DRD for services
carried on DCH. The load balancing DRD will probably be triggered only when the downlink cell remanent
non H power or remanent R99 equivalent user number is less than this threshold.
Recommended value: 35.
Value range: 0~100.
Physical value range: 0%~100%.
Physical unit: %.
Content: This parameter specifies the downlink load threshold to trigger load balancing DRD for services
carried on HS-DSCH. The load balancing DRD will probably be triggered only when the downlink cell
remanent HSDPA guarantee power or remanent HSDPA user number is less than this threshold.
Recommended value: 100.
Value range: 0~100.
Physical value range: 0%~100%.
Physical unit: %.
Content: This parameter specifies the threshold of the downlink remanent total power difference between
the current cell and the target cell when load balancing DRD is applied and the load balancing DRD choice is
Power. Only when the downlink remanent total power difference is less than this threshold can a
neighboring cell be selected as a candidate DRD cell.
Recommended value: 30.
Value range: ON, OFF.
Physical unit: None.
Content: This parameter specifies whether the code balancing DRD algorithm will be applied.
- ON: The code balancing DRD algorithm will be applied.
- OFF: The code balancing DRD algorithm will not be applied.
Recommended value: OFF.
Value range: 0~100.
Physical value range: 0%~100%.
Physical unit: None.
Content: This parameter specifies the threshold of code occupancy offset between the current cell and the
target cell when code balancing DRD is applied. Only when the cell code occupancy offset reaches this
threshold can a neighboring cell be selected to be a candidate cell for DRD.
Recommended value: 7.
Value range: SF4~0, SF8~1, SF16~2, SF32~3, SF64~4, SF128~5, SF256~6.
Physical unit: None.
Content: This parameter specifies one of the triggering conditions of code balancing DRD. (The other
condition is the code occupancy.) This condition refers to that the minimum spreading factor of the best
cell is not smaller than the value of this parameter.
Recommended value: SF8.
Value range: 0~100.
Physical value range: 0%~100%.
Physical unit: %.
Content: This parameter specifies one of the triggering conditions of code balancing DRD. (The other
condition is the minimum spreading factor.) This condition refers to that the code occupancy in the best cell
is not lower than the value of this parameter.
Recommended value: 13.
Value range: Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, DependOnNCell,
BandIndNotUsed.
Physical unit: None.
Content: This parameter specifies the target frequency band in the redirection procedure.
Recommended value: DependOnNCell.
Value range: TRUE, FALSE.
Physical unit: None.
Content: This parameter specifies whether the UL frequency of the target cell of redirection needs to be
configured.
- TRUE: The UL frequency needs to be configured.
- FALSE: The UL frequency does not need to be configured. It is configured automatically according to the
relationship between UL and DL frequencies.
Recommended value: None.
Value range: Depending on the band indication, as shown below:
Band1:
Common frequencies: [9612-9888]
Special frequencies: none
Band2:
Common frequencies: [9262-9538]
Special frequencies: {12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287}
Band3:
Common frequencies: [937-1288]
Special frequencies: none
Band4:
Common frequencies: [1312-1513]
Special frequencies: {1662, 1687, 1712, 1737, 1762, 1787, 1812, 1837, 1862}
Band5:
Common frequencies: [4132-4233]
Special frequencies: {782, 787, 807, 812, 837, 862}
Band6:
Common frequencies: [4162-4188]
Special frequencies: {812, 837}
Band7:
Common frequencies: [2012-2338]
Special frequencies: {2362, 2387, 2412, 2437, 2462, 2487, 2512, 2537, 2562, 2587, 2612, 2637, 2662, 2687}
Band8:
Common frequencies: [2712-2863]
Special frequencies: none
Band9:
Common frequencies: [8762-8912]
Special frequencies: none
BandIndNotUsed:
[0-16383]
Content: This parameter specifies the target uplink UARFCN of a cell for RRC redirection. Assume that the
target uplink UARFCN for RRC redirection is unspecified, the band indication is Band1, Band2, Band3,
Band4, Band5, Band6, Band7, Band8, or Band9, and the target downlink UARFCN for RRC redirection is
valid. Then, the default target uplink UARFCN for RRC redirection is as follows:
- If the DL frequency belongs to common frequencies, then
Band1: Uplink UARFCN = Downlink UARFCN - 950
Band2: Uplink UARFCN = Downlink UARFCN - 400
Band3: Uplink UARFCN = Downlink UARFCN - 225
Band4: Uplink UARFCN = Downlink UARFCN - 225
Band5: Uplink UARFCN = Downlink UARFCN - 225
Band6: Uplink UARFCN = Downlink UARFCN - 225
Band7: Uplink UARFCN = Downlink UARFCN - 225
Band8: Uplink UARFCN = Downlink UARFCN - 225
Band9: Uplink UARFCN = Downlink UARFCN - 475
- If the DL frequency belongs to special frequencies, then
Band2: Uplink UARFCN = Downlink UARFCN - 400
Band4: Uplink UARFCN = Downlink UARFCN - 225
Band5: Uplink UARFCN = Downlink UARFCN - 225
Band6: Uplink UARFCN = Downlink UARFCN - 225
Band7: Uplink UARFCN = Downlink UARFCN - 225
Recommended value: None.
Value range: Depending on the band indication, as shown below:
Band1
Common frequencies: [10562-10838]
Special frequencies: none
Band2
Common frequencies: [9662-9938]
Special frequencies: {412, 437, 462, 487, 512, 537, 562, 587, 612, 637, 662, 687}
Band3
Common frequencies: [1162-1513]
Special frequencies: none
Band4
Common frequencies: [1537-1738]
Special frequencies: {1887, 1912, 1937, 1962, 1987, 2012, 2037, 2062, 2087}
Band5
Common frequencies: [4357-4458]
Special frequencies: {1007, 1012, 1032,1037, 1062, 1087}
Band6
Common frequencies: [4387-4413]
Special frequencies: {1037, 1062}
Band7
Common frequencies: [2237-2563]
Special frequencies: {2587, 2612, 2637, 2662, 2687, 2712, 2737, 2762, 2787, 2812, 2837, 2862, 2887, 2912}
Band8
Common frequencies: [2937-3088]
Special frequencies: none
Band9
Common frequencies: [9237-9387]
Special frequencies: none
BandIndNotUsed:[0-16383]
Function
Note
Parameter
Example
Function
Add cell selection and reselection information.
Note
None.
Parameter
ID Name
CellId Cell ID
Treselecti
ons Reselection delay time[s]
Qrxlevmi
n Min Rx level[2dBm]
Qrxlevmi
n Min Rx level[2dBm]
DeltaQrxl
evmin Delta Min Rx level
MaxAllow
edUlTxPo Max allowed UE UL TX
wer power[dBm]
SpeedDe
pendentS
calingFact Speed dependent scaling
or factor for reselection delay
InterFreq
TreselScal Inter-frequency scaling
ingFactor factor for reselection delay
InterRatT
reselScali Inter-RAT scaling factor for
ngFactor reselection delay
NonhcsIn
d Non-HCS indicator
Tcrmaxno
nhcs Non-HCS max TCR[s]
Ncrnonhc
s Non-HCS NCR
Ncrnonhc
s Non-HCS NCR
Hysteresis 1 for UE in
Qhyst1sp CELL_PCH or URA_PCH
ch state[dB]
Hysteresis 2 for UE in
Qhyst2sp CELL_PCH or URA_PCH
ch state[dB]
Example
After the above operations, the cell reselection parameters are added toCell1 as follows:
1.Cell Sel-reselection quality measure is CPICH Ec/No.
2.Hysteresis 1 for idle mode is 4 dB.
3.Hysteresis 1 for connect mode is 4 dB.
4.Hysteresis 2 for idle mode is 4 dB.
5.Hysteresis 2 for connect mode is 4 dB.
6.The cell reselection delay time is 1s.
7.The minimum quality level of CPICH Ec/No is -18 dB.
8.The minimum Rx level of CPICH RSCP is -116 dBm.
9.The maximum allowed uplink transmit power of a UE in the cell is 21 dBm.
10.The intra-frequency cell reselection threshold for idle state and connect state is 6 dB.
11.The inter-frequency cell reselection threshold for idle state and connect state is 10 dB.
12.The inter-RAT cell reselection threshold is 4 dB.
13.Speed dependent scaling factor for reselection is 0.2.
14.Inter-frequency scaling factor for reselection is 2.5.
15.Inter-RAT scaling factor for reselection is 2.5.
16.The non-HCS speed estimation parameters are configured.
17.The time for non-HCS maximum cell reselection is not used.
18.The non-HCS maximum number of cell reselection is 8.
19.The extra time before a UE resumes its low mobility in a non-HCS cell is not used.
20.Hysteresis 1 for UE in CELL_PCH or URA_PCH state is 5 dB.
21.Hysteresis 1for UE in CELL_FACH state is 5 dB.
22.Hysteresis 2 for UE in CELL_PCH or URA_PCH state is 5 dB.
23.Hysteresis 2 for UE in CELL_FACH state is 5 dB.
24.Reselection delay time for UE in PCH state is 3s.
25.Reselection delay time for UE in CELL_FACH state is 0.6s.
lection Information(ADD CELLSELRESEL)
ection information.
Description
Value range: 0~65535
Physical unit: None
Content: Uniquely identifying a cell
Recommended value: None
Value range: CPICH_ECNO(CPICH Ec/N0), CPICH_RSCP(CPICH RSCP)
Physical unit: None
Content: Measurement quantity of cell selection and reselection. It can be set to CPICH Ec/N0 or CPICH RSCP. For detailed
information of this parameter, refer to 3GPP TS 25.304.
Recommended value: CPICH_ECNO
Value range: 0~20
Physical value range: 0~40; step: 2
Physical unit: dB
Content: The hysteresis value of the serving FDD cells in idle mode in case the quality measurement for cell selection and
reselection is set to CPICH RSCP. It is related to the slow fading feature of the area where the cell is located. The greater the sl
fading variance is, the greater this parameter.
According to the R regulation, the current serving cell involves in cell selection after the measurement value is added with the
hysteresis value. The measurement hysteresis aims to prevent the ping-pong effect of the cell reselection, which is caused by
slow fading when the UE is on the edge of the cell. The ping-pong effect may trigger frequent location updates (idle mode), UR
updates (URA_PCH), or cell updates (CELL_FACH, CELL_PCH), and thus increase the load of network signaling and the
consumption of UE batteries. Set a proper measurement hysteresis to reduce as much as possible effect of the slow fading as
well as ensuring timely cell updates of the UE. According to the CPICH RSCP emulation report of inter-frequency hard handove
the measurement hysteresis ranges 4 dBm to 5 dBm and is set to 4 dBm by default when the slow fading variance is 8 dB and
relative distance is 20 m. In the cells where the slow fading variance is low and the average moving speed of UEs is high, for
example the suburbs and countryside, reduce the measurement hysteresis to guarantee timely location updates of UEs. The
higher the measurement hysteresis is, the less likely it is for various types of cell reselections to occur, and the better the slow
fading resistance capability is, but the slower the system reacts to the environment changes. For detailed information of this
parameter, refer to 3GPP TS 25.304.
According to the R regulation, the current serving cell involves in cell selection after the measurement value is added with the
hysteresis value. The measurement hysteresis aims to prevent the ping-pong effect of the cell reselection, which is caused by
slow fading when the UE is on the edge of the cell. The ping-pong effect may trigger frequent location updates (idle mode), UR
updates (URA_PCH), or cell updates (CELL_FACH, CELL_PCH), and thus increase the load of network signaling and the
consumption of UE batteries. Set a proper measurement hysteresis to reduce as much as possible effect of the slow fading as
well as ensuring timely cell updates of the UE. According to the CPICH RSCP emulation report of inter-frequency hard handove
the measurement hysteresis ranges 4 dBm to 5 dBm and is set to 4 dBm by default when the slow fading variance is 8 dB and
relative distance is 20 m. In the cells where the slow fading variance is low and the average moving speed of UEs is high, for
example the suburbs and countryside, reduce the measurement hysteresis to guarantee timely location updates of UEs. The
higher the measurement hysteresis is, the less likely it is for various types of cell reselections to occur, and the better the slow
fading resistance capability is, but the slower the system reacts to the environment changes. For detailed information of this
parameter, refer to 3GPP TS 25.304.
Recommended value: 2
Value range: {{0~20},{255}}
Physical value range: 0~40; step: 2
Physical unit: dB.
Content: The hysteresis value of the serving FDD cells in idle mode in case the quality measurement for cell selection and
reselection is set to CPICH Ec/No. It is related to the slow fading feature of the area where the cell is located. The greater the
slow fading variance is, the greater this parameter. It is optional. If it is not configured, [Hysteresis 1] will be adopted as the
value. This parameter is not configured when its value is 255.
According to the R regulation, the current serving cell involves in cell selection after the measurement value is added with the
hysteresis value. The measurement hysteresis aims to prevent the ping-pong effect of the cell reselection, which is caused by
slow fading when the UE is on the edge of the cell. The ping-pong effect may trigger frequent location updates (idle mode), UR
updates (URA_PCH), or cell updates (CELL_FACH, CELL_PCH), and thus increase the load of network signaling and the
consumption of UE batteries. Set a proper measurement hysteresis to reduce as much as possible effect of the slow fading as
well as ensuring timely cell updates of the UE. According to the CPICH RSCP emulation report of inter-frequency hard handove
the measurement hysteresis ranges 4 dBm to 5 dBm and is set to 4 dBm by default when the slow fading variance is 8 dB and
relative distance is 20 m. In the cells where the slow fading variance is low and the average moving speed of UEs is high, for
example the suburbs and countryside, reduce the measurement hysteresis to guarantee timely location updates of UEs. The
higher the measurement hysteresis is, the less likely it is for various types of cell reselections to occur, and the better the slow
fading resistance capability is, but the slower the system reacts to the environment changes. For detailed information of this
parameter, refer to 3GPP TS 25.304.
Recommended value: the same as Qhyst1s for idle mode
Value range: {{0~20},{255}}.
Physical value range: 0~40; step: 2.
Physical unit: dB.
Content: The hysteresis value of the serving FDD cells in connected mode in case the quality measurement for cell selection an
reselection is set to CPICH Ec/No. It is related to the slow fading feature of the area where the cell is located. The greater the
slow fading variance is, the greater this parameter. This parameter is not configured when its value is 255.
According to the R regulation, the current serving cell involves in cell selection after the measurement value is added with the
hysteresis value. The measurement hysteresis aims to prevent the ping-pong effect of the cell reselection, which is caused by
slow fading when the UE is on the edge of the cell. The ping-pong effect may trigger frequent location updates (idle mode), UR
updates (URA_PCH), or cell updates (CELL_FACH, CELL_PCH), and thus increase the load of network signaling and the
consumption of UE batteries. Set a proper measurement hysteresis to reduce as much as possible effect of the slow fading as
well as ensuring timely cell updates of the UE. According to the CPICH RSCP emulation report of inter-frequency hard handove
the measurement hysteresis ranges 4 dBm to 5 dBm and is set to 4 dBm by default when the slow fading variance is 8 dB and
relative distance is 20 m. In the cells where the slow fading variance is low and the average moving speed of UEs is high, for
example the suburbs and countryside, reduce the measurement hysteresis to guarantee timely location updates of UEs. The
higher the measurement hysteresis is, the less likely it is for various types of cell reselections to occur, and the better the slow
fading resistance capability is, but the slower the system reacts to the environment changes. For detailed information of this
parameter, refer to 3GPP TS 25.304.
Recommended value:the same as Qhyst1s for connect mode.
Value range: 0~31
Physical unit: s
Content: If the signal quality (CPICH Ec/No measured by the UE) of a neighboring cell is better than that of the serving cell dur
the specified time of this parameter, the UE reselects the neighboring cell. It is used to avoid ping-pong reselection between
different cells. Note that the value 0 corresponds to the default value defined in the protocol.
Set the parameter as follows:
1. Ensure that the UE can reselect a cell when crossing the non-soft-switch area of the cell and that the UE timely performs
location updates, cell updates, or URA updates when necessary.
2. Ensure that the UE does not reselect a cell when it is in the soft-switch area of the cell. In this way, the unnecessary location
updates, cell updates, and URA updates are avoided.
3. Consider the difference between cells that cover different areas, for example the cells covering highways and cells covering
densely populated areas. TIf the parameter is set to a comparatively low value, the ping-pong reselections may be caused. The
parameter can be increased in populated area and reduced in high-speed movement. If the parameter is set to a comparative
high value, the cell reselection delay may become excessively high, and thus cell reselections may be affected.
For detailed information, refer to 3GPP TS 25.304.
Recommended value: 1
Value range: -24~0
Physical unit: dB
Content: The minimum required quality threshold corresponding to CPICH Ec/No. The UE can camp on the cell only when the
measured CPICH Ec/No is greater than the value of this parameter. The higher the parameter value is, the more difficult it is fo
the UE to reside in the cell. The lower parameter value is, the easier it is for the UE to reside in the cell, but it is possible that t
UE cannot receive the system messages that are sent through the PCCPCH. For detailed information, refer to the 3GPP TS
25.304.
Recommended value: -18
Value range: -58~-13
Physical value range: -115~-25; step: 2 (-58:-115; -57:-113; ...; -13:-25 )
Physical unit: dBm
Content: The minimum required RX threshold corresponding to CPICH RSCP. The UE can camp on the cell only when the
measured CPICH RSCP is greater than the value of this parameter. The setting of Qrxlevmin should be related to Qqualmin. Th
higher the parameter is, the more difficult it is for the UE to reside in the cell. The lower parameter is, the easier it is for the U
reside in the cell, but it is possible that the UE cannot receive the system messages that are sent through the PCCPCH. For
detailed information, refer to 3GPP TS 25.304.
Recommended value: -58
Value range: TRUE, FALSE
Physical unit: none
Content: Indicating whether the minimum required RX level is extended. For detailed information of this parameter, refer to
3GPP TS 25.304.
Recommended value: FALSE
Value range: -2, -1
Physical value range: -4, -2; step: 2 (-2: -4; -1:-2)
Physical unit: none
Content: Actual minimum required RX level = minimum required RX level + extended minimum required RX level.
Recommended value: none
Value range: -50~33
Physical unit: dBm
Content: The maximum allowed uplink transmit power of a UE in the cell, which is related to the network planning. For detaile
information, refer to 3GPP TS 25.304.
Recommended value: 24
Value range: {{-16~10},{127}}
Physical value range: -32~20; step: 2
Physical unit: dB
Content: Threshold for intra-frequency cell reselection in idle mode. When the quality (CPICH Ec/No measured by the UE) of t
serving cell is lower than this threshold plus the [Qqualmin] of the cell, the intra-frequency cell reselection procedure will be
started. This parameter is not configured when its value is 127. The intra-frequency cell reselection has a priority higher than t
inter-frequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection start threshold should be
higher than the inter-frequency cell reselection start threshold and inter-RAT cell reselection start threshold. If the cell
reselection threshold is set to a comparatively high value, the UE may frequently start cell reselections, and the battery of the
may be largely consumed. If the cell reselection threshold is set to a comparatively low value, it is difficult for cell reselections
be started, and the UE may not timely reside in the cells with good quality, affecting the quality of communication between th
UTRAN and the UE. For detailed information, refer to 3GPP TS 25.304.
Recommended value: None
Value range: {{-16~10},{127}}
Physical value range: -32~20; step: 2
Physical unit: dB
Content: Threshold for inter-frequency cell reselection in idle mode. When the quality (CPICH Ec/No measured by UE) of the
serving cell is lower than this threshold plus the [Qqualmin] of the cell, the inter-frequency cell reselection procedure will be
started. This parameter is not configured when its value is 127. The intra-frequency cell reselection has a priority higher than t
inter-frequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection start threshold should be
higher than the inter-frequency cell reselection start threshold and inter-RAT cell reselection start threshold. If the cell
reselection threshold is set to a comparatively high value, the UE may frequently start cell reselections, and the battery of the
may be largely consumed. If the cell reselection threshold is set to a comparatively low value, it is difficult for cell reselections
be started, and the UE may not timely reside in the cells with good quality, affecting the quality of communication between th
UTRAN and the UE. For detailed information, refer to 3GPP TS 25.304.
Recommended value: None
Value range: {{-16~10},{127}}
Physical value range: -32~20; step: 2
Physical unit: dB.
Content: Threshold for intra-frequency cell reselection in connected mode. When the quality (CPICH Ec/No measured by the U
of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the intra-frequency cell reselection procedure w
be started. This parameter is not configured when its value is 127. The intra-frequency cell reselection has a priority higher tha
the inter-frequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection start threshold should b
higher than the inter-frequency cell reselection start threshold and inter-RAT cell reselection start threshold. If the cell
reselection threshold is set to a comparatively high value, the UE may frequently start cell reselections, and the battery of the
may be largely consumed. If the cell reselection threshold is set to a comparatively low value, it is difficult for cell reselections
be started, and the UE may not timely reside in the cells with good quality, affecting the quality of communication between th
UTRAN and the UE. For detailed information, refer to 3GPP TS 25.304.
Recommended value: None
Value range: {{-16~10},{127}}.
Physical value range: -32~20; step: 2.
Physical unit: dB.
Content: Threshold for inter-frequency cell reselection in connected mode. When the quality (CPICH Ec/No measured by UE) o
the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the inter-frequency cell reselection procedure will
started. This parameter is not configured when its value is 127. The intra-frequency cell reselection has a priority higher than t
inter-frequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection start threshold should be
higher than the inter-frequency cell reselection start threshold and inter-RAT cell reselection start threshold. If the cell
reselection threshold is set to a comparatively high value, the UE may frequently start cell reselections, and the battery of the
may be largely consumed. If the cell reselection threshold is set to a comparatively low value, it is difficult for cell reselections
be started, and the UE may not timely reside in the cells with good quality, affecting the quality of communication between th
UTRAN and the UE. For detailed information, refer to 3GPP TS 25.304.
Recommended value: None.
Value range: {{-16~10},{127}}
Physical value range: -32~20; step: 2
Physical unit: dB
Content: Threshold for inter-RAT cell reselection. When the quality (CPICH Ec/No measured by UE) of the serving cell is lower
than this threshold plus the [Qqualmin] of the cell, the inter-RAT cell reselection procedure will be started. This parameter is n
configured when its value is 127. This parameter is not configured when its value is 127. The intra-frequency cell reselection h
a priority higher than the inter-frequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection st
threshold should be higher than the inter-frequency cell reselection start threshold and inter-RAT cell reselection start thresho
If the cell reselection threshold is set to a comparatively high value, the UE may frequently start cell reselections, and the batt
of the UE may be largely consumed. If the cell reselection threshold is set to a comparatively low value, it is difficult for cell
reselections to be started, and the UE may not timely reside in the cells with good quality, affecting the quality of communicati
between the UTRAN and the UE. For detailed information, refer to 3GPP TS 25.304.
Recommended value: None
Value range: {{{0~10},{255}}
Physical value range: 0~1; step: 0.1
Physical unit: None
Content: For a high-mobility UE, multiples this parameter by its reselection delay to reduce the reselection delay of the UE. Th
parameter can be set to 10 for middle-speed UE, which means no influence upon reselection delay time. This parameter is no
configured when its value is 255. For detailed inforamtion, refer to 3GPP TS 25.304.
Recommended value: None
Value range: {{4~19},{255}}
Physical value range: 1~4.75.step: 0.25
Physical unit: None
Content: This parameter is used to increase time of inter-frequency reselection. It is not configured when its value is 255. For
detailed inforamtion, refer to 3GPP TS 25.304.
Recommended value: None
Value range: {{4~19},{255}}
Physical value range: 1~4.75.step: 0.25
Physical unit: None
Content: This parameter is used to increase time of inter-RAT reselection. It is not configured when its value is 255. For detaile
inforamtion, refer to 3GPP TS 25.304.
Recommended value: None
Value range: CONFIGURED, NOT_CONFIGURED
Physical unit: None
Content: Indicating whether the non-HCS speed estimation parameter should be configured.
Recommended value: None
Value range: not used, D30, D60, D120, D180, D240
Physical value range: not used, 30, 60, 120, 180, 240
Physical unit: s
Content: Maximum duration of non-HCS cell reselection. If the number of cell reselection exceed the value of this parameter
during Tcrmaxnonhcs, the UE is not in high-speed movement. For detailed inforamtion, refer to 3GPP TS 25.304.
Recommended value:NotUsed
Value range: 1~16
Physical unit: None
Content: Maximum number of non-HCS cell reselection. This parameter, along with Tcrmaxnonhcs, defines the speed estimati
threshold of non-HCS cells. For detailed inforamtion, refer to 3GPP TS 25.304.
Recommended value: 8
Value range: not used, D10, D20, D30, D40, D50, D60, D70
Physical value range: not used, 10, 20, 30, 40, 50, 60, 70
Physical unit: s
Content: Hysterisis time before non-HCS resuming slow movement. When UE is in high-speed movement, if the number of ce
reselections is less than Ncrnonhcs, the UE resumes to slow movement. For detailed inforamtion, refer to 3GPP TS 25.304.
Recommended value: NotUsed
Value range: {{0~40},{255}}
Physical unit: dB
Content: This parameter indicates that in the CELL_PCH or URA_PCH connection mode, the measurement hysteresis of the UE
1. It is used when CPICH RSCP is used in cell selection and reselection measurement. This parameter is not configured when th
value is 255.
Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed inforamtion, refer to 3GPP T
25.304.
Recommended value: None
Value range: {{0~40},{255}}
Physical unit: dB
Content: This parameter indicates that in the CELL_FACH connection mode, the measurement hysteresis of the UE is 1. It is us
when CPICH RSCP is used in cell selection and reselection measurement. This parameter is not configured when the value is 2
Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed inforamtion, refer to 3GPP T
25.304.
Recommended value: None
Value range: {{0~40},{255}}
Physical unit: dB
Content: This parameter indicates that in the CELL_PCH or URA_PCH connection mode, the measurement hysteresis of the UE
2. It is used when CPICH EcNo is used in cell selection and reselection measurement. This parameter is not configured when th
value is 255.
Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed inforamtion, refer to 3GPP T
25.304.
Recommended value: None
Value range: {{0~40},{255}}
Physical unit: dB
Content: This parameter indicates that in the CELL_FACH connection mode, the measurement hysteresis of the UE is 2. It is us
when CPICH EcNo is used in cell selection and reselection measurement. This parameter is not configured when the value is 2
Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed inforamtion, refer to 3GPP T
25.304.
Recommended value: None
Value range: {{0~31},{255}}
Physical unit: s
Content: This parameter indicates the UE reselection delay in the CELL_PCH or URA_PCH connection mode. This parameter is
configured when the value is 255. Instead, the Treselections parameter is used. For detailed inforamtion, refer to 3GPP TS 25.
Recommended value: None
Value range: {{0~31},{255}}
Physical value range: 0~6.2; step: 0.2
Physical unit: s
Content: This parameter indicates the UE reselection delay in the CELL_FACH connection mode. This parameter is not configu
when the value is 255. Instead, the Treselections parameter is used. For detailed inforamtion, refer to 3GPP TS 25.304.
Recommended value: None
mode is 4 dB.
mode is 4 dB.
Function
Note
Parameter
Example
Function
Note
1. It is not mandatory to configure inter-frequency neighboring cells in pairs, e.g. Cell 2 might not be one of cell 1's neighborin
2. Before adding an inter-frequency neighboring cell, check whether this cell belongs to the local RNC or another RNC. If the c
3.One cell's inter-frequency neighbour cells with same downlink frequency and uplink frequency are limited to 32.
Parameter
ID Name
CellId Cell ID
RNC ID of
RncId neighboring cell
Neighboring cell
CIOOffset oriented CIO[0.5dB]
IdleQoffs
et1sn IdleQoffset1sn[dB]
IdleQoffs
et2sn IdleQoffset2sn[dB]
ConnQoff
set2sn ConnQoffset2sn[dB]
Tpenalty
HcsResele HCS Cell Reselect
ct Penalty Timer[s]
The priority of
HOCovPri coverage based inter-
o frequency handover
BlindHOFl
ag Blind handover flag
BlindHOQ
ualityCon Blind handover
dition condition[dBm]
The priority of
NPrio neighbor cell
The priority of
NPrio neighbor cell
DRDEcN0
Threshhol Drd Ec/N0
d threshold[dB]
Example
To add for the cell 1 an inter-frequency neighboring cell 100 with the following configuration:
1. RNC ID of neighboring cell: 9
2. Neighboring cell ID: 100
3. Cell offset: 0
4. SIB11 Indicator: TRUE
5. SIB12 Indicator: FALSE
6. HCS Cell Reselect Penalty Timer: D0
7. The priority of coverage based inter-frequency handover: 1
8. Blind handover flag: FALSE
9. The flag of the priority: FALSE
Execute the following command:
ADD INTERFREQNCELL: CellId=1, RncId=9, NCellId=100, CIOOffset=0, SIB11Ind=TRUE, SIB12Ind=FALSE, TpenaltyHcsReselect=D
eighboring Cell(ADD INTERFREQNCELL)
to configure inter-frequency neighboring cells in pairs, e.g. Cell 2 might not be one of cell 1's neighboring cells while cell 1 is cell 2's.
ter-frequency neighboring cell, check whether this cell belongs to the local RNC or another RNC. If the cell belongs to another RNC, execut
uency neighbour cells with same downlink frequency and uplink frequency are limited to 32.
Description
Cell ID
Value range: 0~65535
Content: uniquely identifying a cell
Recommended value (default value): none
ID of the RNC controlling a neighboring cell
Value range: 0~4095
Content: uniquely identifying an RNC
Neighboring cell ID
Value range: 0~65535
Content: uniquely identifying a neighboring cell
Recommended value (default value): none
Neighboring cell oriented Cell Individual Offset (CIO)
Value range: -20 ~ 20
Physical value range: -10~10,step:0.5
Physical unit: dB
Content: This parameter defines the neighboring cell oriented cell individual offset. The set value functions in combination of
oriented CIO. Their sum is added to the measurement quantity before the UE evaluated whether an event has occurred. In ha
algorithms, this parameter is used for moving the border of a cell.
Recommended value (default value): 0
Flag of whether to include this neighboring relationship in the System Information Block 11 (SIB11)
Value range: TRUE, FALSE
Content:
This parameter indicates whether the neighboring cell information is delivered in SIB11. FALSE: not to include the neighboring
information in the SIB11. TRUE: to include the neighboring information in the SIB11.
Recommended value (default value): TRUE
Offset of cell CPICH RSCP measurement value in cell selection or reselection when the UE is in idle mode
Value range: -50~50
Physical unit: dB
Content:
Offset of neighboring cell CPICH measurement value. This parameter is used for RSSI measurement. The offset is subtracted fr
neighboring cell measurement value before cell reselection.
This parameter defines the offset of cell CPICH RSCP measurement value in cell selection or reselection when the UE is in idle
In cell reselection algorithm, this parameter is used for moving the border of a cell. This parameter can be configured by the n
planner according to reality.
NOTE:
In FDD mode, this parameter is valid only when SIB11 Indicator is set as TRUE.
For details, refer to 3GPP TS 25.331.
As for the impact on network performance:
The larger the value of the parameter, the lower the probability of selecting neighboring cells. The smaller the value the param
the higher the probability of doing so.
Recommended value (default value): 0
Offset of cell CPICH Ec/No measurement value in cell selection or reselection when the UE is in idle mode
Value range: -50~50
Physical unit: dB
Content:
Offset of neighboring cell CPICH measurement value This parameter is used for Ec/No measurement. The offset is subtracted
neighboring cell measurement value before cell reselection.
In cell reselection algorithm, this parameter is used for moving the border of a cell. This parameter can be configured by the n
planner according to reality.
NOTE:
In FDD mode this parameter is valid only when SIB11 Indicator is set as TRUE.
For details, refer to 3GPP TS 25.331.
As for the impact on network performance:
The larger the value of the parameter, the lower the probability of selecting neighboring cells. The smaller the value the param
the higher the probability of doing so.
Recommended value (default value): 0
Flag of whether to include this neighboring relationship in the System Information Block 12 (SIB12)
Value range: TRUE, FALSE
Content:
This parameter indicates whether the neighboring cell information is delivered in SIB12. FALSE: not to include the neighboring
information in the SIB12. TRUE: to include the neighboring information in the SIB12.
Recommended value (default value): FALSE
Offset of cell CPICH RSCP measurement value in cell selection or reselection when the UE is in connected mode
Value range: -50~50
Physical unit: dB
Content:
This parameter is used for cell offset in cell selection and reselection. During cell reselection, the cell offset corresponding to C
Ec/No is QOffset2sn, that to CPICH RSCP is QOffset1sn. Idle is used for idle mode, and Conn for connected mode. ConnQoffset
ConnQoffset2sn are valid only when SIB12Ind = TRUE, namely, the SIB12 message is existing.
Offset of neighboring cell CPICH measurement value This parameter is used for RSCP measurement. The offset is subtracted fr
neighboring cell measurement value before cell reselection.
In cell reselection algorithm, this parameter is used for moving the border of a cell. This parameter can be configured by the R
Network Planner(RNP) according to reality.
For details, refer to 3GPP TS 25.331.
As for the impact on network performance:
The larger the value of the parameter, the lower the probability of selecting neighboring cells. The smaller the value the param
the higher the probability of doing so.
Recommended value (default value): 0
Offset of cell CPICH Ec/No measurement value in cell selection or reselection when the UE is in connected mode
Value range: -50~50
Physical unit: dB
Content:
This parameter is used for cell offset in cell selection and reselection. During cell reselection, the cell offset corresponding to C
Ec/No is QOffset2sn, that to CPICH RSCP is QOffset1sn. Idle is used for idle mode, and Conn for connected mode. ConnQoffset
ConnQoffset2sn are valid only when SIB12Ind=TRUE, namely, the SIB12 message is existing.
Offset of neighboring cell CPICH measurement value This parameter is used for Ec/No measurement. The offset is subtracted
neighboring cell measurement value before cell reselection.
In cell reselection algorithm, this parameter is used for moving the border of a cell. This parameter can be configured by the R
Network Planner(RNP) according to reality.
For details, refer to 3GPP TS 25.331.
As for the impact on network performance:
The larger the value of the parameter, the lower the probability of selecting neighboring cells. The smaller the value the param
the higher the probability of doing so.
Recommended value (default value): 0
HCS cell reselection penalty timer
Value range: D0, D10, D20, D30, D40, D50, D60
Content:
Physical value range: 0, 10, 20, 30, 40, 50, 60
Unit: s
This parameter indicates the penalty time after the HCS cell reselection. During the penalty time period, the UE cannot perfor
another HCS cell reselection.
The larger the value of the parameter, the longer the HCS penalty time.
The smaller the value of the parameter, the shorter the HCS penalty time.
Recommended value (default value): D0
Offset of HCS cell CPICH RSCP measurement value in cell selection or reselection
Value range: D3, D6, D9, D12, D15, D18, D21, Infinity
Content:
Physical value range: 3, 6, 9, 12, 15, 18, 21, Infinity
Unit: dB
This is the offset of cell CPICH RSCP measurement value in HCS cell selection or reselection. The larger the value of the parame
lower the probability of selecting neighboring cells.
The smaller the value of the parameter, the higher the probability of doing so.
Recommended value (default value): D3
Offset of cell CPICH Ec/No measurement value in cell selection or reselection
Value range: D2, D3, D4, D6, D8, D10, D12, Infinity
Content:
Physical value range: 2, 3, 4, 6, 8, 10, 12, Infinity
Physical unit: dB
This parameter defines the offset of cell CPICH Ec/No measurement value in cell selection or reselection.
The larger the value of the parameter, the lower the probability of selecting neighboring cells.
The smaller the value the parameter, the higher the probability of doing so.
Recommended value (default value): D2
Priority of coverage-based inter-frequency handover
Value range: 0~3
Content:
"0" means that the coverage-based inter-frequency handover is not supported.
"1" means the highest priority.
"3" means the lowest priority.
Recommended value (default value): 1
Flag of target cell for blind handovers
Value range: TRUE, FALSE
Content:
This parameter indicates whether the neighboring cell is the target cell for blind handovers.
If the value is TRUE, blind handovers can be performed to the neighboring cell.
Recommended value (default value): FALSE
Blind handover condition
Value range: -115~-25
Physical unit: dBm
Content:
If the value is not -115, the handover is defined as Conditional Blind HO, which is used for the inter-frequency neighboring cel
same coverage.
If the value is -115, the handover is defined as Direct Blind HO, which is used for the inter-frequency neighboring cells of large
coverage.
Recommended value (default value): -92
Priority identifier of neighboring cells
Value range: TRUE, FALSE
Content:
TRUE indicates that the neighboring cell priority is valid in the algorithm of neighboring cell combination. FALSE indicates that
neighboring cell priority is invalid, and, in the algorithm of neighboring cell combination, the cell with invalid priority is the last
be considered as the measurement object.
Recommended value (default value): FALSE
Priority of neighboring cells
Value range: 0~63
Content:
The priority that corresponds to the neighboring cell is valid only when the this parameter is set to TRUE. The lower the priorit
easier it is for the neighboring cell to be delivered as the measurement object. For example, it is more possible for a neighbori
priority 1 than a cell of priority 2 to be delivered as the measurement object.
Recommended value (default value): None
This parameter is used as the DRD Ec/No threshold of whether to perform the blind handover.
Value range: -24~0
Physical value range: -12~0,step:0.5
Physical unit: dB
Content: This parameter is used as the DRD Ec/No threshold of whether to perform the blind handover. If the Ec/No measure
of the current cell is greater than this parameter of the inter-frequency neighboring cell, this neighboring cell can be selected
candidate DRD cell.
Recommended value: -18
enalty Timer: D0
rage based inter-frequency handover: 1
Function
Note
Parameter
Example
Function
Note
1. [Cell environment type] is set to TU generally. In most cases, this parameter should not be changed.
2. Following restriction must be satisfied:
1)[UL OLC trigger threshold] >= [UL total power threshold] > [UL handover access threshold] > [UL threshold of Conv AMR serv
2)MAX(UL handover access threshold,UL threshold of Conv AMR service,UL threshold of Conv non_AMR service,UL threshold
3)[Ul HandOver Credit Reserved SF] >= [Ul LDR Credit SF reserved threshold];
4)[DL OLC trigger threshold] >= [DL total power threshold] >= [DL handover access threshold] > [DL threshold of Conv AMR ser
5)MAX(DL handover access threshold,DL threshold of Conv AMR service,DL threshold of Conv non_AMR service,DL threshold
6)[Dl HandOver Credit and Code Reserved SF] >= [Dl LDR Credit SF reserved threshold];
[Dl HandOver Credit and Code Reserved SF] >= [Cell LDR SF reserved threshold];
[MTCH maximal power] > [MTCH reserve power];
[MTCH maximal power SF] > [MTCH reserve SF].
7)[Ul TotalPower CAC threshold] > [UL Target LoadFactor].
The parameters of [UL LDR trigger threshold], [DL LDR trigger threshold], [UL OLC trigger threshold] and [DL OLC trigger thresh
Parameter
ID Name
CellId Cell ID
CellId Cell ID
Cell
environment
CellEnvType type
UL threshold of
Conv AMR
UlNonCtrlThdForAMR service[%]
UL threshold of
UlNonCtrlThdForNonAM Conv non_AMR
R service[%]
UL threshold of
other
UlNonCtrlThdForOther services[%]
UL threshold of
other
UlNonCtrlThdForOther services[%]
DL threshold of
Conv AMR
DlConvAMRThd service[%]
DL threshold of
Conv non_AMR
DlConvNonAMRThd service[%]
DL threshold of
other
DlOtherThd services[%]
UL handover
access
UlNonCtrlThdForHo threshold[%]
DL handover
access
DlHOThd threshold[%]
UL total power
UlCellTotalThd threshold[%]
DL total power
DlCellTotalThd threshold[%]
UL common
channel load
reserved
UlCCHLoadFactor coefficient[%]
UL common
channel load
reserved
UlCCHLoadFactor coefficient[%]
DL common
channel load
reserved
DlCCHLoadRsrvCoeff coefficient[%]
UL total
equivalent user
UlTotalEqUserNum number
DL total
equivalent user
DlTotalEqUserNum number
Low priority
HsupaLowPriorityUserPB HSUPA user PBR
RThd threshold[%]
Equal priority
HsupaEqualPriorityUserP HSUPA user PBR
BRThd threshold[%]
High priority
HsupaHighPriorityUserP HSUPA user PBR
BRThd threshold[%]
UL HS-DPCCH
reserve
UlHsDpcchRsvdFactor factor[%]
HSDPA
streaming PBR
HsdpaStrmPBRThd threshold[%]
HSDPA best
effort PBR
HsdpaBePBRThd threshold[%]
Maximum
HSDPA user
MaxHsdpaUserNum number
Maximum
HSDPA user
MaxHsdpaUserNum number
Max UL TX
power of
conversational
MaxUlTxPowerforConv service[dBm]
Max UL TX
power of
streaming
MaxUlTxPowerforStr service[dBm]
Max UL TX
power of
interactive
MaxUlTxPowerforInt service[dBm]
Max UL TX
power of
background
MaxUlTxPowerforBac service[dBm]
Background
BackgroundNoise noise[0.1dBm]
Default PCPICH
DefPcpichEcNo Ec/No[dB]
Auto-adaptive
background
noise update
BGNSwitch switch
Background
noise update
continuance
BGNAdjustTimeLen time[s]
Equivalent user
number
threshold for
background
BGNEqUserNumThd noise
Maximum
HSUPA user
MaxHsupaUserNum number
DL HSUPA
reserved
DlHSUPARsvdFactor factor[%]
DL MBMS
reserved
DlMBMSRsvdFactor factor[%]
DL MBMS
reserved
DlMBMSRsvdFactor factor[%]
MTCH reserve
MtchRsvPwr power[%]
MTCH reserve
MtchRsvSf SF
MTCH maximal
MtchMaxPwr power[%]
MTCH maximal
MtchMaxSf SF
UL handover
credit reserved
UlHoCeResvSf SF
DL handover
credit and code
DlHoCeCodeResvSf reserved SF
Background
noise update
BgnStartTime start time
Background
noise update
BgnEndTime end time
Background
noise update
BgnUpdateThd trigger threshold
Background
noise abnormal
BgnAbnormalThd threshold
Background
noise abnormal
BgnAbnormalThd threshold
Maximum
EFACH user
MaxEFachUserNum number
Example
After the above operations, the parameters of cell 1 are set as follows:
The cell environment type is TU;
The nonorthogonality factor is 0.4;
The UL threshold of Conv AMR service is 0.75;
The UL threshold of Conv non_AMR service is 0.75;
The UL threshold of other services is 0.6;
The DL threshold of Conv AMR service is 80%;
The DL threshold of Conv non_AMR service is 80%;
The DL threshold of other services is 75%;
The UL handover access threshold is 0.8;
The DL handover access threshold is 85%;
The UL common channel load factor is 0.00.
The DL common channel load reserved coefficient is 0%;
The UL total equivalent user number is 80;
The DL total equivalent user number is 80;
The UL HS-DPCCH reserve factor is 0.00;
Hsdpa streaming PBR threshold is 70%;
Hsdpa best effort PBR threshold is 30%;
The maximum HSDPA user number is 64;
The maximum UL transmit power of conversational service is 24dBm;
The maximum UL transmit power of streaming service is 24dBm;
The maximum UL transmit power of interactive service is 24dBm;
The maximum UL transmit power of background service is 24dBm;
The background noise is -103 dBm;
The Default PCPICH Ec/No is -6 dB;
The Auto-Adaptive Background Noise Update Switch is OFF;
The Background Noise Update Continuance Time is 10 minutes;
The Equivalent User Number Threshold for Background Noise Update is 0;
The maximum HSUPA user number is 20;
The Dl HSUPA reserved factor is 20;
The Dl MBMS reserved factor is 20;
Ul HandOver Credit Reserved SF is SF16;
Dl HandOver Credit and Code Reserved SF is SF32.
hm parameters(ADD CELLCAC)
[UL total power threshold] > [UL handover access threshold] > [UL threshold of Conv AMR service], [UL threshold of Conv non_AMR servic
shold,UL threshold of Conv AMR service,UL threshold of Conv non_AMR service,UL threshold of other services) > [UL LDR trigger threshold
SF] >= [Ul LDR Credit SF reserved threshold];
[DL total power threshold] >= [DL handover access threshold] > [DL threshold of Conv AMR service], [DL threshold of Conv non_AMR servi
shold,DL threshold of Conv AMR service,DL threshold of Conv non_AMR service,DL threshold of other services) > [DL LDR trigger threshold
Reserved SF] >= [Dl LDR Credit SF reserved threshold];
eserved SF] >= [Cell LDR SF reserved threshold];
H reserve power];
TCH reserve SF].
] > [UL Target LoadFactor].
er threshold], [DL LDR trigger threshold], [UL OLC trigger threshold] and [DL OLC trigger threshold] are set in ADD CELLLDM and MOD CELL
Description
Description:Uniquely identifying a cell.
GUI value range:0~65535
Actual value range:{0~65535}
Unit:None
Default value:-
Recommended Value:None
Description:Defining the radio environment type of the cell, such as a typical town cell, urban cell, and mountain area cell.
GUI value range:TU, RA, HT
Actual value range:TU, RA, HT
Unit:None
Default value:TU
Recommended Value:TU
Description:The percentage of the conversational AMR service threshold to the 100% uplink load. It is applicable to algorithm
admission. That is, when an AMR service is accessing, the RNC evalutates the measurement value of the uplink load after the
after the access of an AMR speech service, this service will be rejected. If the UL load of a cell will not be higher than this thres
The UL load factor thresholds include parameters of [UL threshold of Conv non_AMR service], [UL handover access threshold]
limit the proportion between the conversational service, handover user and other services in a specific cell, and to guarantee
high the system load after admission may be over large, which impacts system stability and leads to system congestion. If the
waste in idle resources.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:None
Default value:75
Recommended Value:75
Description:The percentage of the conversational non-AMR service threshold to the 100% uplink load. It is applicable to algori
AMR service admission. That is, when a non-AMR service is accessing, the RNC evalutates the measurement value of the uplin
this threshold after the access of a non-AMR speech service, this service will be rejected. If the UL load of a cell will not be hig
The UL load factor thresholds include parameters of [UL threshold of Conv non_AMR service], [UL handover access threshold]
limit the proportion between the conversational service, handover user and other services in a specific cell, and to guarantee
too high the system load after admission may be over large, which impacts system stability and leads to system congestion. If
in waste in idle resources.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:None
Default value:75
Recommended Value:75
Description:The percentage of other service thresholds to the 100% uplink load. The services refer to other admissions except
handover scenarios. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling other service admiss
measurement value of the uplink load after the service is accessed. If the UL load of a cell is higher than this threshold after th
will not be higher than this threshold, this service will be admitted.
The UL load factor thresholds include parameters of [UL threshold of Conv non_AMR service], [UL handover access threshold]
limit the proportion between the conversational service, handover user and other services in a specific cell, and to guarantee
load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low,
resources.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:None
Default value:60
Recommended Value:60
Description:The percentage of the conversational AMR service threshold to the 100% downlink load. It is applicable to algorith
service admission. That is, when an AMR service is accessing, the RNC evalutates the measurement value of the downlink load
threshold after the access of an AMR speech service, this service will be rejected. If the DL load of a cell will not be higher than
The DL load factor thresholds include parameters of [DL threshold of Conv non_AMR service], [DL handover access threshold]
limit the proportion between the conversational service, handover user and other services in a specific cell, and to guarantee
high the system load after admission may be over large, which impacts system stability and leads to system congestion. If the
waste in idle resources and the failure to achieving network planning target.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:None
Default value:80
Recommended Value:80
Description:The percentage of the conversational non-AMR service threshold to the 100% downlink load. It is applicable to alg
AMR service admission. That is, when a non-AMR service is accessing, the RNC evalutates the measurement value of the down
than this threshold after the access of a non-AMR speech service, this service will be rejected. If the DL load of a cell will not b
The DL load factor thresholds include parameters of [DL threshold of Conv non_AMR service], [DL handover access threshold]
limit the proportion between the conversational service, handover user and other services in a specific cell, and to guarantee
too high the system load after admission may be over large, which impacts system stability and leads to system congestion. If
in waste in idle resource and the failure to achieving the network planning target.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:None
Default value:80
Recommended Value:80
Description:The percentage of other service thresholds to the 100% downlink load. The services refer to other admissions exc
handover scenarios. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling other service admiss
measurement value of the downlink load after the service is accessed. If the DL load of a cell is higher than this threshold afte
cell will not be higher than this threshold, this service will be admitted.
The DL load factor thresholds include parameters of [DL threshold of Conv non_AMR service], [DL handover access threshold]
limit the proportion between the conversational service, handover user and other services in a specific cell, and to guarantee
load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low,
resources and the failure to achieving network planning target.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:None
Default value:75
Recommended Value:75
Description:The percentage of the handover service admission threshold to the 100% uplink load. It is applicable to algorithm
admission. That is, when a service is handing over to a cell, the RNC evalutates the measurement value of the uplink load afte
threshold after the access, this service will be rejected. If the UL load of a cell will not be higher than this threshold, this servic
The UL load factor thresholds include parameters of [UL threshold of Conv non_AMR service], [UL handover access threshold]
limit the proportion between the non-handover service, handover user and other services in a specific cell, and to guarantee t
the access priority of the handover service. If the value is too high the system load after admission may be over large, which im
low, the possibility of user rejects may increase, resulting in waste in idle resources.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:None
Default value:80
Recommended Value:80
Description:The percentage of the handover service admission threshold to the 100% downlink load. It is applicable to algorith
admission. That is, when a service is handing over to a cell, the RNC evalutates the measurement value of the downlink load a
threshold after the access, this service will be rejected. If the DL load of a cell will not be higher than this threshold, this servic
The DL load factor thresholds include parameters of [DL threshold of Conv non_AMR service], [DL handover access threshold]
limit the proportion between the non-handover service, handover user and other services in a specific cell, and to guarantee t
the cell radius and cell maximum TX power. If the value is too high, the system load after admission may be over large, which
too low, the possibility of user rejects may increase, resulting in waste in idle resources.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:None
Default value:85
Recommended Value:85
Description:Admission threshold of total cell uplink power. This parameter is related to the target load of the uplink schedule.
schedule mechanism of the HSUPA. Therefore, the target load is added with margin, acting as the basis of this parameter. If th
which impacts system stability and leads to system congestion. If the value is too low, the possibility of user rejects may increa
target load threshold of the uplink schedule, the possibility of user rejects is great.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:None
Default value:83
Recommended Value:83
Description:Admission threshold of the total cell downlink power. If the value is too high, too many users will be admitted. Ho
too low, cell capacity will be wasted.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:None
Default value:90
Recommended Value:90
Description:The admission control decision is only for dedicated channels. For common channels, some resources instead of a
In the UL, according to the current load factor and the characteristics of the new call, the UL CAC algorithm predicts the new t
then plus with the premeditated common channel UL load factor to get the predicted UL load factor. Then, compare it with th
the call is admitted; otherwise, rejected. If the value is too high, power resources are wasted, which impacts system capacity.
impacted in case of insufficient resources.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:None
Default value:0
Recommended Value:0
Description:Different admission policies are used for dedicated channel and common channel users. For common channel use
For dedicated channel users, according to the current load factor and the characteristics of the new call, the CAC algorithm pr
then plus with the premeditated common channel DL load factor to get the predicted DL load factor. Then, compare it with th
the call is admitted; otherwise, rejected.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:None
Default value:0
Recommended Value:0
Description:When the algorithm 2 is used, this parameter defines the total equivalent user numbers corresponding to the 100
threshold and actual condition of the network. If the value is too high, the system load after admission may be over large, whi
too low, the possibility of user rejects may increase, resulting in waste in idle resources.
GUI value range:1~200
Actual value range:1~200
Unit:None
Default value:80
Recommended Value:80
Description:When the algorithm 2 is used, this parameter defines the total equivalent user number corresponding to the 100%
threshold and actual condition of the network. If the value is too high, the system load after admission may be over large, whi
too low, the possibility of user rejects may increase, resulting in waste in idle resources.
GUI value range:1~200
Actual value range:1~200
Unit:None
Default value:80
Recommended Value:80
Description:Threshold of all the HSUPA user PBR whose schedule priority is lower than that of users to be admitted. If this valu
increases, which impacts access success rate. If the value is too low, too many HSUPA schedule users may be admitted, which
congestion.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:per cent
Default value:100
Recommended Value:100
Description:Threshold of all the HSUPA user PBR whose schedule priority is the same as that of users to be admitted. If this va
increases, which impacts access success rate. If the value is too low, too many HSUPA schedule users may be admitted, which
congestion.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:per cent
Default value:100
Recommended Value:100
Description:Threshold of all the HSUPA user PBR whose schedule priority is higher than that of users to be admitted. If this val
increases, which impacts access success rate. If the value is too low, too many HSUPA schedule users may be admitted, which
congestionRecommended.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:per cent
Default value:100
Recommended Value:100
Description:If the HS-DPCCH carries ACK/NACK, the system will not perform CAC. If the HS-DPCCH carries CQI, the system will
uplink HS-DPCCH carrying ACK/NACK. The corresponding threshold is the uplink limit capacity multiplied by this parameter. If
admissions increases, leading to waste in uplink resources. If the value is too low, the uplink resources is insufficient. However
relatively low, the value can be set to a low level, representing the loose admission rule.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:per cent
Default value:0
Recommended Value:0
Description:Average throughput admission threshold of the HSDPA streaming service. If the sum of PBR of all the accessed str
of the HSDPA streaming service multiplied by the sum of GBR of all the accessed streaming users, it indicates that the QoS of t
are not allowed. Otherwise, the QoS can be satisfied and new HSDPA streaming services are allowed. If the value is too high, a
improves the service quality of the HSDPA streaming service but also may lead to HSDPA capacity waste. If the value is too low
allows more HSDPA streaming services but QoS of the HSDPA streaming service cannot be guaranteed.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:per cent
Default value:70
Recommended Value:70
Description:Average throughput admission threshold of the HSDPA best effort traffic. If the sum of PBR of all the accessed HSD
the HSDPA BE service multiplied by the sum of GBR of all the accessed HSDPA BE users, it indicates that the QoS of the access
Otherwise, the QoS can be satisfied and new HSDPA BE services are allowed. If the value is too high, admission requirement o
HSDPA BE service but also may lead to HSDPA capacity waste. If the value is too low, admission requirement of the HSDPA BE
service cannot be guaranteed.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:per cent
Default value:30
Recommended Value:30
Description:Maximum number of users supported by the HSDPA channel. The user in this parameter refers to the user with se
on the HSDPA channel. Maximum HSDPA user number cannot exceed the HSDPA capability of the NodeB product, In practice,
available HSDPA power and code resources. If the value is too low, the cell HSDPA capacity may be reduces, leading to waste
congested.
GUI value range:0~100
Actual value range:0~100
Unit:None
Default value:64
Recommended Value:64
Description:Maximum UL transmit power for conversational service in a specific cell. It is based on the UL coverage requireme
larger the value of this parameter is, the wider the coverage of the corresponding services will be. When the downlink covera
will become unbalanced. If the values of these parameters are too small, the uplink coverage will probably be smaller than the
related IE "Maximum allowed UL TX power", refer to the 3GPP TS 25.331.
GUI value range:-50~33
Actual value range:-50~33
Unit:dBm
Default value:24
Recommended Value:24
Description:Maximum UL transmit power for the streaming service in a specific cell. It is based on the UL coverage requiremen
the value of this parameter is, the wider the coverage of the corresponding services will be. When the downlink coverage is ex
become unbalanced. If the values of these parameters are too small, the uplink coverage will probably be smaller than the do
"Maximum allowed UL TX power", refer to the 3GPP TS 25.331.
GUI value range:-50~33
Actual value range:-50~33
Unit:dBm
Default value:24
Recommended Value:24
Description:The maximum UL transmit power for the interactive service in a specific cell. It is based on the UL coverage requir
larger the value of this parameter is, the wider the coverage of the corresponding services will be. When the downlink covera
will become unbalanced. If the values of these parameters are too small, the uplink coverage will probably be smaller than the
related IE "Maximum allowed UL TX power", refer to the 3GPP TS 25.331.
GUI value range:-50~33
Actual value range:-50~33
Unit:dBm
Default value:24
Recommended Value:24
Description:The maximum UL transmit power for background service in a specific cell. It is based on the UL coverage requirem
larger the value of this parameter is, the wider the coverage of the corresponding services will be. When the downlink covera
will become unbalanced. If the values of these parameters are too small, the uplink coverage will probably be smaller than the
related IE "Maximum allowed UL TX power", refer to the 3GPP TS 25.331.
GUI value range:-50~33
Actual value range:-50~33
Unit:dBm
Default value:24
Recommended Value:24
Description:If [Auto-Adaptive Background Noise Update Switch] is set to OFF, it is used to set background noise of the cell. If [
background noise is restricted by this parameter and [PARA]BgnAbnormalThd[/PARA]. For detailed information of this parame
GUI value range:0~621
Actual value range:-112~-50,step:0.1
Unit:dBm
Default value:61
Recommended Value:61
Description:When the RNC is performing downlink open power control, it evaluates link consumption according to the PCPICH
However, in some cases, the UE may not report the signal intensity. In this situation, the RNC uses this parameter to evaluate
GUI value range:-30~30
Actual value range:-30~30
Unit:dB
Default value:-13
Recommended Value:-13
Description:When the parameter is 'OFF', the auto-adaptive background noise update algorithm is switched off. Otherwise, th
GUI value range:OFF, ON
Actual value range:OFF, ON
Unit:None
Default value:ON
Recommended Value:ON
Description:Only when the measured background noise's duration reaches this parameter, the output of the auto-adaptive ba
noise, and the current value is replaced with the new one. At the same time, the auto-adaptive status should be restarted; oth
noise.
GUI value range:1~6000
Actual value range:1~6000
Unit:s
Default value:120
Recommended Value:120
Description:When the number of uplink equivalent users is not larger than this parameter, the RTWP could be regarded as ba
auto-adaptive background noise update filter; otherwise, the RTWP could not be regarded as background noise, and should n
should be reset.
GUI value range:0~10
Actual value range:0~10
Unit:None
Default value:0
Recommended Value:0
Description:Maximum number of users supported by the HSUPA channel.The user in this parameter refers to the user with se
on the HSUPA channel. Maximum HSUPA user number cannot exceed the HSUPA capacity.
GUI value range:0~100
Actual value range:0~100
Unit:None
Default value:20
Recommended Value:20
Description:Reserved DL power factor for HSUPA user. The higher the value is, the more resources reserved for the HSUPA co
HSUPA user quality may be impacted.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:None
Default value:0
Recommended Value:0
Description:Reserved DL power factor for MBMS service.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:None
Default value:0
Recommended Value:0
Description:Available guarantee power of all the MTCHs. This parameter is a protection for the MBMS PTM bearing. When the
should be avoided. This is because the MBMS PTM bearing serves multiple users at the same time. The value should not be to
MBMS PTM bearing and too little capacity is left for the non-MBMS services.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:None
Default value:20
Recommended Value:20
Description:Available guarantee codes of all the MTCHs. This parameter is a protection for the MBMS PTM bearing. When the
should be avoided. This is because the MBMS PTM bearing serves multiple users at the same time. The value should not be to
MBMS PTM bearing and too little capacity is left for the non-MBMS services.
GUI value range:0~63
Actual value range:0~63
Unit:None
Default value:16
Recommended Value:16
Description:Maximum power limit of all the MTCHs. This parameter is a limit to the maximum bearing of the MBMS PTM bear
PTM bearing should be avoided. This is because the MBMS PTM bearing serves multiple users at the same time. The value sho
consumed by the MBMS PTM bearing and too little capacity is left for the non-MBMS services.
GUI value range:0~100
Actual value range:0~1, step:0.01
Unit:None
Default value:60
Recommended Value:60
Description:Maximum code limit of all the MTCHs. This parameter is a limit to the maximum bearing of the MBMS PTM bearin
bearing should be avoided. This is because the MBMS PTM bearing serves multiple users at the same time. The value should n
the MBMS PTM bearing and too little capacity is left for the non-MBMS services.
GUI value range:0~63
Actual value range:0~63
Unit:None
Default value:40
Recommended Value:40
Description:Uplink Credit Reserved by Spread Factor for HandOver. SFOFF means that none of them are reserved for handove
access of a new service, the service will be rejected. If the value is too high, the credit resource reserved for handover UEs wil
admissions, and performance of handover UEs cannot be guaranteed. If the value is too low, the possibility of rejecting new U
GUI value range:SF4(SF4), SF8(SF8), SF16(SF16), SF32(SF32), SF64(SF64), SF128(SF128), SF256(SF256), SFOFF(SFOFF)
Actual value range:SF4,SF8,SF16,SF32,SF64,SF128,SF256,SFOFF
Unit:None
Default value:SF16
Recommended Value:SF16
Description:Some cell resources can be reserved for handover UEs to guarantee handover success rate and improve access pr
downlink code and CE resources reserved for handover. SFOFF refers to that no resources is reserved. SF32 refers to that a co
reserved. The backer position the value is in {SF4,SF8,SF16,SF32,SF64,SF128,SF256,SFOFF}, the less code and credit resources
admissions increases and performance of UEs cannot be guaranteed. The more frontal position the value is, the more the pos
GUI value range:SF4(SF4), SF8(SF8), SF16(SF16), SF32(SF32), SF64(SF64), SF128(SF128), SF256(SF256), SFOFF(SFOFF)
Actual value range:SF4,SF8,SF16,SF32,SF64,SF128,SF256,SFOFF
Unit:None
Default value:SF32
Recommended Value:SF32
Description:(1) This parameter, along with the [Algorithm stop time], is used to limit the validation time of the background no
[Algorithm start time], and the background noise automatic updata algorithm is enabled, then the algorithm is activated durin
In other periods, the algorithm fails. If [Algorithm stop time] is less than [Algorithm start time], and the background noise auto
the period of [Algorithm stop time] each day to [Algorithm start time] of the next day. In other periods, the algorithm fails.
(2) Input format: HH&MM&SS.
GUI value range:hour, min, sec
Actual value range:hour{0~23}, min{0~59}, sec{0~59}
Unit:None
Default value:-
Recommended Value:01&00&00
Description:(1) This parameter, along with the [Algorithm start time], is used to limit the validation time of the background no
[Algorithm start time], and the background noise automatic updata algorithm is enabled, then the algorithm is activated durin
In other periods, the algorithm fails. If [Algorithm stop time] is less than [Algorithm start time], and the background noise auto
the period of [Algorithm stop time] each day to [Algorithm start time] of the next day. In other periods, the algorithm fails.
(2) Input format: HH&MM&SS.
GUI value range:hour, min, sec
Actual value range:hour{0~23}, min{0~59}, sec{0~59}
Unit:None
Default value:-
Recommended Value:06&00&00
Description:The difference of RTWP that trigger the update of background noise. If the difference is larger than the threshold,
GUI value range:1~100
Actual value range:0.1~10, step:0.1
Unit:dBm
Default value:5
Recommended Value:5
Description:This parameter is applied when [PARA]BGNSwitch[/PARA] is set to ON. (1) If the difference of measured backgrou
the RTWP threshold, the background noise will not be updated. (2) If the difference of new background noise and the configu
not be updated.
GUI value range:1~400
Actual value range:0.1~40, step:0.1
Unit:dB
Default value:100
Recommended Value:100
Description:Maximum number of users supported by the EFACH channel.
GUI value range:0~48
Actual value range:0~48
Unit:None
Default value:48
Recommended Value:48
ervice is 0.75;
AMR service is 0.75;
ervice is 80%;
AMR service is 80%;
ctor is 0.00.
served coefficient is 0%;
of [Dl LDR Credit SF reserved threshold] and [Cell LDR SF reserved threshold] are set in ADD CELLLDR and MOD CELLLDR, and they can be li
UlTotalEqUserNum=80,DlTotalEqUserNum=80, UlHsDpcchRsvdFactor=0, HsdpaStrmPBRThd=70, HsdpaBePBRThd=30, MaxHsdpaUserNum
ELLLDR, and they can be listed by LST CELLLDR. The parameters of [UL Target LoadFactor] is set in MOD CELLHSUPA.
hd=30, MaxHsdpaUserNum=64, MaxUlTxPowerforConv=24, MaxUlTxPowerforStr=24, MaxUlTxPowerforInt=24, MaxUlTxPowerforBac=24,
MaxUlTxPowerforBac=24, BackgroundNoise=71, DefPcpichEcNo=-13, BGNSwitch=OFF, BGNAdjustTimeLen=10, BGNEqUserNumThd=0, Sh
BGNEqUserNumThd=0, ShoInitPwrPo=15, MaxHsupaUserNum=20, DlHSUPARsvdFactor=20, DlMBMSRsvdFactor=20, UlHoCeResvSf=SF16
or=20, UlHoCeResvSf=SF16, DlHoCeCodeResvSf=SF32;
INDEX
Set UE Timers and Constants in Idle Mode(SET IDLEMODETIMER)
Function
Note
Parameter
Example
Function
Note
None.
Parameter
ID Name
Timer
T300 300
Constant
N300 300
Timer
T312 312
Constant
N312 312
Example
Modify the Constant 300 in idle mode. The maximum number ofretransmissions of RRC CONNECTION REQUEST is modified as
SET IDLEMODETIMER: N300=4;
After the above operation, N300 is modified as 4.
UE Timers and Constants in Idle Mode(SET IDLEMODETIMER)
Description
Value range: D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D2000, D3000, D4000,
D6000, D8000.
Physical value range: 100, 200, 400, 600, 800, 1000, 1200, 1400, 1600, 1800, 2000, 3000, 4000, 6000, 8000
Physical unit: ms.
Content: T300 is started when UE sends the RRC CONNECTION REQUEST message. It is stopped when UE
receives the RRC CONNECTION SETUP message. RRC CONNECTION REQUEST will be resent upon the expiry
of the timer if V300 is lower than or equal to N300, else enter idle mode.
Recommended value: D2000.
Value range: 0~7.
Physical unit: None.
Content: Maximum number of retransmissions of the RRC CONNECTION REQUEST message.
Recommended value: 3.
Physical unit: s.
Content: T312 is started when UE starts to establish a DCH, and stopped when UE detects consecutive N312
"in sync" indications from L1. It indicates physical channel setup failure upon the expiry of the timer.
Recommended value: 6.
Value range: D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D800, D1000.
Physical value range: 1, 2, 4, 10, 20, 50, 100, 200, 400, 600, 800, 1000.
Physical unit: None.
Content: Maximum number of successive "in sync" indications received from L1.
Recommended value: D1.
fy the Constant 300 in idle mode. The maximum number ofretransmissions of RRC CONNECTION REQUEST is modified as 4.
DLEMODETIMER: N300=4;
the above operation, N300 is modified as 4.
modified as 4.
INDEX
Set UE Timers and Constants in Connected Mode(SET CONNMODETIMER)
Function
Note
Parameter
Example
Function
Note
It is demanded that the time value of T314 and T315 shall be both equal to 0 or both greater than T302*N302.
According to 25331 CR 1990, T317 will never expire, all values are mapped to infinity.
Parameter
ID Name
Constant
N302 302
Constant
N304 304
Constant
N304 304
Constant
N308 308
Constant
N312 312
T313 Timer 313
Constant
N313 313
Constant
N315 315
Example
nded that the time value of T314 and T315 shall be both equal to 0 or both greater than T302*N302.
to 25331 CR 1990, T317 will never expire, all values are mapped to infinity.
Description
Value range: D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D2000, D3000, D4000,
D6000, D8000.
Physical value range: 100, 200, 400, 600, 800, 1000, 1200, 1400, 1600, 1800, 2000, 3000, 4000, 6000, 8000.
Physical unit: ms.
Content: T302 is started after the UE transmits the CELL UPDATE/URA UPDATE message and stopped after
the UE receives the CELL UPDATE CONFIRM/URA UPDATE CONFIRM message. CELL UPDATE/URA UPDATE
will be resent upon the expiry of the timer if V302 less than or equal to N302; otherwise, the UE will enter
idle mode. Protocol default value is 4000.
Recommended value: D2000.
Value range: 0~7.
Content: T304 is started after the UE sends the UE CAPABILITY INFORMATION message and stopped after the
UE receives the UE CAPABILITY INFORMATION CONFIRM message. UE CAPABILITY INFORMATION will be
resent upon the expiry of the timer if V304 less than or equal N304; otherwise the cell update procedure will
be initiated. Protocol default value is 2000.
Recommended value: D2000.
Value range: 0~7.
Content: T305 is started after the UE receives CELL UPDATE CONFIRM/URA UPDATE CONFIRM in CELL_FACH,
URA_PCH or CELL_PCH state. It is stopped after the UE enters another state. CELL UPDATE will be transmitted
upon the expiry of this timer if T307 is not activated and the UE detects "in service area"; otherwise, T307
will be started. Protocol default value is 30. "Infinity" means the cell will not be updated.
Recommended value: D10.
Value range: D5, D10, D15, D20, D30, D40, D50.
Physical value range: 5, 10, 15, 20, 30, 40, 50.
Physical unit: s.
Content: T307 is started after T305 has expired and the UE detects "out of service area". It is stopped after
the UE detects "in service area". The UE will enter idle mode upon expiry.Protocol default value is 30.
Value range: D40, D80, D160, D320.
Physical value range: 40, 80, 160, 320.
Physical unit: ms.
Content: T308 is started after the UE transmits RRC CONNECTION RELEASE COMPLETE. This message will be
sent upon the expiry of the Timer if V308 less than or equal to N308, otherwise, the UE will enter idle mode.
Protocol default value is 160.
Recommended value: D40.
Value range: 1~8.
Content: Maximum number of retransmission of RRC CONNECTION RELEASE COMPLETE.
Recommended value: 1.
Value range: 1~8.
Physical unit: s.
Content: T309 is started after the UE is reselected to a cell belonging to another radio access system in
connected mode, or the CELL CHANGE ORDER FROM UTRAN message is received. It is stopped after the UE is
successfully connected in the new cell. The UE will continue the connection to UTRAN upon expiry. Protocol
default value is 5.
Recommended value: 5.
Value range: 1 ~ 15.
Physical unit: s.
Content: T312 is started after the UE starts to establish a DCH and stopped when the UE detects consecutive
N312 "in sync" indications from L1. It indicates physical channel setup failure upon the expiry of the timer.
Protocol default value is 1.
Recommended value: 6.
Value range: D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D800, D1000.
Physical value range: 1, 2, 4, 10, 20, 50, 100, 200, 400, 600, 800, 1000.
Content: Maximum number of successive "in sync" indications received from L1. Protocol default value is 1.
Recommended value: D1.
Value range: 0~15.
Physical unit: s.
Content: T313 is started after the UE detects consecutive N313 "out of sync" indications from L1. T313 is
stopped after the UE detects consecutive N315 "in sync" indications from L1.It indicates Radio Link (RL)
failure upon expiry. Protocol default value is 3.
Recommended value: 3.
Value range: D1, D2, D4, D10, D20, D50, D100, D200.
Physical value range: 1, 2, 4, 10, 20, 50, 100, 200.
Content: Maximum number of successive "out of sync" indications received from L1. Protocol default value is
20.
Recommended value: D50.
Value range: D0, D2, D4, D6, D8, D12, D16, D20.
Physical value range: 0, 2, 4, 6, 8, 12, 16, 20.
Physical unit: s.
Content: T314 is started when the criteria for radio link failure are fulfilled and only radio bearers (RBs)
associated with T314 exist.T314 is stopped after the Cell Update procedure has been completed. Protocol
default value is 12.
In case of the RL failure when the UE is in CELL_DCH state, If the RL cannot be successfully reconfigured by
CELL UPDATE CONFIRM before the expiry of the corresponding T314 (or T315), CELL UPDATE will be resent
for RL reconfiguration (this operation relates to T302 and N302). T314 should be set greater than T302*N302.
In case of the expiry of T314, the corresponding service RBs will be removed.
Recommended value: D20.
Value range: D0, D10, D30, D60, D180, D600, D1200, D1800.
Physical value range: 0, 10, 30, 60, 180, 600, 1200, 1800.
Physical unit: s.
Content: T315 is started when the criteria for radio link failure are fulfilled, and only the radio bearer
associated with T315 exists.T315 is stopped after the Cell Update procedure has been completed. Protocol
default value is 180.
In case of the RL failure when the UE is in CELL_DCH state, T315 (or T314) is started and CELL UPDATE is sent.
If the RL cannot be successfully reconfigured by CELL UPDATE CONFIRM before the expiry of the
corresponding T315 (or T314), CELL UPDATE will be resent for RL reconfiguration (this operation relates to
T302 and N302). T315 should be set greater than T302*N302. In case of the expiry of T315, the
corresponding service RBs will be removed.
Recommended value: D30.
Value range: D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D800, D1000.
Physical value range: 1, 2, 4, 10, 20, 50, 100, 200, 400, 600, 800, 1000.
Physical unit: NONE.
Content: Maximum number of successive "in sync" indications received from L1 when T313 is activated.
Protocol default value is 1.
Recommended value: D1.
Value range: D0, D10, D20, D30, D40, D50, INFINITY.
Physical value range: 0, 10, 20, 30, 40, 50, infinity.
Physical unit: s.
Content: T316 is started after the UE detects "out of service area" in URA_PCH or CELL_PCH state.T316 is
stopped after the UE detects "in service area".The cell update procedure will be initiated upon the expiry of
the timer if "in service area" is detected; otherwise, T317 will be started. The UE will enter CELL_FACH state
and initiate cell update procedure when the UE detects "in service area". Protocol default value is 30.
Recommended value: D30.
Value range: D0, D10, D30, D60, D180, D600, D1200, D1800.
Physical value range: infinity, infinity, infinity, infinity, infinity, infinity, infinity, infinity.
Physical unit: s.
Content: T317 is started after the T316 expires or the UE in CELL_FACH state detects "out of service area".
According to 25331 CR 1990, T317 will never expire, all values are mapped to infinity. Protocol default value
is infinity.
Recommended value: D0.
Parameter
ID Name
Inter-RAT report
INTERRATREPORTMODE mode
2D2F Measure
2D2FMEASQUANTITY Quantity
HYSTFOR2D 2D hysteresis
HYSTFOR2F 2F hysteresis
HYSTFOR3A 3A hysteresis
Inter-RAT CS measure
INTERRATCSTHD2DECN0 start Ec/No THD
Inter-RAT CS measure
INTERRATCSTHD2FECN0 stop Ec/No THD
Inter-RAT PS measure
INTERRATPSTHD2DECN0 start Ec/No THD
Inter-RAT PS measure
INTERRATPSTHD2FECN0 stop Ec/No THD
Inter-RAT CS measure
INTERRATCSTHD2DRSCP start RSCP THD
Inter-RAT CS measure
INTERRATCSTHD2FRSCP stop RSCP THD
Inter-RAT PS measure
INTERRATPSTHD2DRSCP start RSCP THD
Inter-RAT PS measure
INTERRATPSTHD2FRSCP stop RSCP THD
Inter-RAT CS
handover decision
INTERRATCOVHOCSTHD THD
Inter-RAT PS
handover decision
INTERRATCOVHOPSTHD THD
Inter-RAT CS Used
IRHOUSEDFREQCSTHDEC frequency trigger
N0 Ec/No THD
Inter-RAT PS Used
IRHOUSEDFREQPSTHDEC frequency trigger
N0 Ec/No THD
Inter-RAT PS Used
IRHOUSEDFREQPSTHDEC frequency trigger
N0 Ec/No THD
Inter-RAT CS Used
IRHOUSEDFREQCSTHDRS frequency trigger
CP RSCP THD
Inter-RAT PS Used
IRHOUSEDFREQPSTHDRS frequency trigger
CP RSCP THD
Inter-RAT handover
PENALTYTIMEFORINTER failure penalty timer
RATHO length
Inter-RAT measure
INTERRATMEASTIME timer length
Description 3RU03
Value range: D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19.
Value range: D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19.
Content: Weight used for computing frequency general quality. The more this parameter is, the higher the
calculated general quality of an active set. When this parameter is 0, the general quality of the active set is
the quality of the best cell in it. This parameter is used for event 3A evaluation.
Recommended value: 0. 0
Value range: NON_PERIODIC_REPORT,D250, D500, D1000, D2000, D3000, D4000, D6000, D8000, D12000,
D16000, D20000, D24000, D28000, D32000, D64000.
Content: Event 2D trigger hysteresis. This parameter value is related to the slow fading characteristic. The
greater this parameter is, the less the ping-pong effect and misjudgment that can be caused. However, in
this case, the event cannot be triggered in time.
Recommended value: 6. 6
Content: Event 2F trigger hysteresis. This parameter value is related to the slow fading characteristic. The
greater this parameter is, the less the ping-pong effect and misjudgment that can be caused. However, in
this case, the event cannot be triggered in time.
Recommended value: 6. 6
Content: Event 3A trigger hysteresis. This parameter value is related to the slow fading characteristic. The
greater this parameter is, the less the ping-pong effect and misjudgment that can be caused. However, in
this case, the event cannot be triggered in time.
Recommended value: 0. 0
Content: Determining whether to trigger inter-RAT handover decision together with quality threshold. The
smaller the shadow fading is, the smaller the parameter value should be.
Recommended value: 4. 4
Value range: D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,
D5000.
Physical value range: 0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000.
Physical unit: ms.
Content: Event 2D trigger delay time. This parameter value is related to the slow fading characteristic. The
greater this parameter is, the smaller the misjudgment probability, but the lower the speed of event
response to measured signal changes.
Physical value range: 0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000.
Content: Event 2F trigger delay time. This parameter value is related to the slow fading characteristic. The
greater this parameter is, the smaller the misjudgment probability, but the lower the speed of event
response to measured signal changes.
Physical value range: 0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000.
Content: Event 3A trigger delay time. This parameter value is related to the slow fading characteristic. The
greater this parameter is, the smaller the misjudgment probability, but the lower the speed of event
response to measured signal changes.
Content: Delay time for triggering a GSM cell unacknowledged by BSIC. In the period specified by this
parameter, if the signal quality of an adjacent GSM cell meets the requirement for inter-RAT handover and
this cell is unacknowledged, the network will start inter-RAT handover. The value 65535 means that the RNC
will not hand over to an unacknowledged GSM cell.
Content: Delay time for triggering a GSM cell acknowledged by BSIC. In the period specified by this
parameter, if the signal quality of an adjacent GSM cell meets the requirement for inter-RAT handover and
this cell is acknowledged, the network will start inter-RAT handover.
Recommended value: 0.
Content: Controlling whether to report a detected cell. The value "Required" means that a detected GSM cell
will be reported only after its BSIC is decoded correctly. The value "Not Required" means that a detected
GSM cell will be reported whether its BSIC is decoded or not as long as it meets reporting conditions.
Recommended value: Required. Required
Content: If the CS service uses Ec/No as measurement item, when the measurement value is higher than this
threshold, the UE reports event 2F; the RNC sends a signalling to disable compressed mode and stop inter-
RAT measurement.
Content: If the PS service uses Ec/No as measurement item, when the measurement value is higher than this
threshold, the UE reports event 2F; the RNC sends a signalling to disable compressed mode and stop inter-
RAT measurement.
Content: If the CS service uses RSCP as measurement item, when the measurement value is lower than this
threshold, the UE reports event 2D; the RNC sends a signalling to enable compressed mode and start inter-
RAT measurement.
Content: If the CS service uses RSCP as measurement item, when the measurement value is higher than this
threshold, the UE reports event 2F; the RNC sends a signalling to disable compressed mode and stop inter-
RAT measurement.
Content: If the PS service uses RSCP as measurement item, when the measurement value is lower than this
threshold, the UE reports event 2D; the RNC sends a signalling to enable compressed mode and start inter-
RAT measurement.
Content: If the PS service uses RSCP as measurement item, when the measurement value is higher than this
threshold, the UE reports event 2F; the RNC sends a signalling to disable compressed mode and stop inter-
RAT measurement.
Physical value range: ¨C110 to ¨C48 (1: ¨C110; 2: ¨C109; ...; 63: ¨C48).
Content: This parameter indicates the requirement of CS service inter-RAT handover for the quality of inter-
RAT cells. If the event-triggered reporting mode is adopted, event 3A might be triggered when the quality of
the target frequency is higher than this threshold. If the periodical reporting mode is adopted, this
parameter is used for coverage-based inter-RAT handover evaluation at the RNC side. The value 0 means the
physical value is smaller than ¨C110 dBm.
21
Recommended value: 21. ( 90dBm)
Physical value range: ¨C110 to ¨C48 (1: ¨C110; 2: ¨C109; ...; 63: ¨C48).
Content: This parameter indicates the requirement of PS service inter-RAT handover for the quality of inter-
RAT cells. If the event-triggered reporting mode is adopted, event 3A might be triggered when the quality of
the target frequency is higher than this threshold. If the periodical reporting mode is adopted, this
parameter is used for coverage-based inter-RAT handover evaluation at the RNC side. The value 0 means the
physical value is smaller than ¨C110 dBm.
Content: If CS service inter-RAT handover uses the event-triggered reporting mode, event 3A might be
triggered only the Ec/No value of the used frequency is lower than this threshold. (Event 3A can be triggered
only when the two necessary conditions can be met at the same time.)
Content: If PS service inter-RAT handover uses the event-triggered reporting mode, event 3A might be
triggered only the RSCP value of the used frequency is lower than this threshold. (Event 3A can be triggered
only when the two necessary conditions can be met at the same time.)
Physical unit: s.
Content: If the inter-RAT handover to a GSM cell fails, the possible reason is that this cell is overloaded.
Therefore, in the period specified by this parameter, the system will not send the inter-RAT handover
request to this cell.
Physical unit: s.
Content: If no inter-RAT handover occurs upon expiry of the inter-RAT measurement timer, the system stops
inter-RAT measurement and disables the compressed mode if enabled. If this parameter is 0, the system will
not start the inter-RAT measurement timer.
Add high speed downlink packet access (HSDPA) parameters for a cell.
Note
Parameter
ID Name
CELLID Cell ID
Allocate
Code
ALLOCCODEMODE Mode
Code
Number
for HS-
HSPDSCHCODENUM PDSCH
Code Max
Number
for HS-
HSPDSCHMAXCODENUM PDSCH
Code Min
Number
for HS-
HSPDSCHMINCODENUM PDSCH
Reserved
SF
REVSFTHD threshold
Code
Number
for HS-
HSSCCHCODENUM SCCH
HS-
PDSCH
And HS-
SCCH
HSDPAPOWER Power
HS-
PDSCH
And HS-
SCCH
HSDPAPOWER Power
HS-
PDSCH
MPO
HSPDSCHMPOCONSTENUM Constant
Example
Description
Value range: 0~65535.
Content: Uniquely identifying a cell.
Value range: Manual,Automatic.
Content: Choose the mode of allocating HsPdsch codes.There are two
modes:
1 as follows: