Professional Documents
Culture Documents
Doron PVC Waterstop
Doron PVC Waterstop
Doron PVC Waterstop
GENERAL PROPERTIES:
ADVANTAGES: Easy to install and can be welded, non-corrosive and chemical resistant, flexible and
weather resistant.
SPECIFICATION:
1. Corrugated Fin Type w/ Centerbulb: With a lengthwise protuberances which make its
adherence to concrete.
2. Flat Dumbbell Type: Which relatively little hydraulic pressure or subsidence. Suitable mainly
for such expansion joints as in walls, watercourses and basements.
3. Flat Dumbbell Type w/ Centerbulb: The bulb is designed to stand loading or expansion and
contraction of concrete in an uneven subsidence such as elevated railroads and culverts. It
absorbs outside pressure and vibration and stops water permeation.
Page -2-
Ensure that the waterstop is retained in the horizontal plane and that adequate compaction of
concrete takes place below the web of the waterstop so as to avoid “honeycombing.” After
stripping the form work supporting the waterstop, the second half of the waterstop can be cast into
the adjoining slab, with similar precautions being taken in regard to “honeycombing” of the
concrete.
JOINTING AT JOBSITE: The process of the heat fusion or welding is used to provide
butt joints between lengths of DORON PVC WATERSTOP or between lengths of waterstop and
performed junction pieces. A special portable jig is provided for this purpose and is used in
conjunction with heated blade. The ends of the waterstop having been cut square, the jig is used to
line up the two ends of the waterstop in precise opposition. The heated blade is then inserted
between two ends and the material is melted on contact. The blade is then removed and the two
ends of the waterstop pushed together in the jig where they achieve fusion.
DESCRIPTION SPECIFICATION
PLAIN DUMBELL TYPE 8”Wx3/8”Tx50’
6”Wx3/16”T
6”Wx1/4”T
6”Wx3/8”T
8”Wx1/4”T
8”Wx3/16”Tx50’