Professional Documents
Culture Documents
SUB - Proofex OGP - ASIA
SUB - Proofex OGP - ASIA
Fosroc’s commitment to customer service and technical support is second to none. We work
closely with architects, structural engineers, contractors and owners to best understand their
requirements. Together, we can develop a bespoke solution for a construction project, adding
value and becoming more than just a materials supplier, but a solution provider.
Fosroc has extensive network of offices and manufacturing locations across Europe, the
Middle East, India, North, South and East Asia, and is further represented in other regions
across the world by distributor and licensee partners.
Selecting from the full portfolio of Fosroc products and services and integrating expert
technical support, world class customer service and innovation, Fosroc goes beyond just
product selling to ensure that we partner with our customers to deliver complete
constructive solutions.
> Admixtures
> Adhesives
> Protective Coatings
> Concrete Repair
> Industrial Flooring
Leader in delivering
Constructive Solutions
Worldwide!
FOSROC DELIVER SOLUTIONS
NOT JUST PRODUCTS
Contents
Technical Datasheet
Safety Datasheets
Method Statement
Test Reports
Technical Datasheets
Fosroc® Proofex OGP
Loose laid synthetic TPO waterproofing
membrane
Uses Specification
Provides a continuously loose laid waterproof The waterproofing shall be a reinforced 1.2mm/1.5mm thick
membrane system for building and civil engineering loose laid TPO/FPA membrane with hot air welded seams.
structures and is particularly suited to above ground
applications including green roofs and cool roofs
Typical properties
■ Podium, garden roofs, flat/sloping roofs and green roofs,
Thickness (EN 1849-2) 1.2mm and 1.5mm
below-ground waterproofings
■ Below ground waterproofing Standard Colour Upper Layer : Grey
Page 1
Fosroc® Proofex OGP
Application Fire
The membrane layers are overlapped to achieve a minimum Fosroc Proofex OGP is non flammable.
weld of 50mm. Hot air welding can be either hand applied or Fosroc Proofex OGP Adhesive is highly flammable.
by means of automatic machines.
For corner detailing use Fosroc Proofex OGP
Internal/External corner pieces. Supply
For upstand terminations use Fosroc Proofex Metal Strip. Proofex OGP : 2.1mm wide x 25m
(1.2mm and 1.5mm) long rolls
For vertical detailing use Fosroc Proofex OGP adhesive.
(other thicknesses available upon special request)
Various Fosroc Proofex TPO drain outlets and connectors Proofex OGP Adhesive : 20kg pail
and aerator are available (Coverage rates approx 0.4-
0.6kg/m2)
For additional details on installation including relevant fixings
and washers and a list of Fosroc approved applicators refer Proofex Metal Strip : 1m x 2m sheets
to your local Fosroc office. 1.2mm thick 1m x 3m sheets
Proofex OGP : Each
Corner pieces
Storage Drain connectors
Fosroc Proofex OGP must be stored in a cool, dry store in Drain outlets
the original unopened packaging. Aerator
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the
Supply of Goods and Services, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that any advice,
recommendation, specification of information it may give is accurate and correct, it cannot, because it has no direct or continuous
control over where or how its products are applied, accept any liability either directly or indirectly arising from the use of its
products, whether or not in accordance with any advice, specification, recommendation of information given by it.
Fosroc International
Malaysia China Indonesia Singapore
Fosroc Sdn. Bhd Fosroc Guangzhou Limited PT. Fosroc Indonesia Fosroc Singapore
Tel : +60 3 5102 5660 Tel : +86 20 8226 9245 Tel : +62 21 897 2103 Tel: +65 6665 3828
enquirymalaysia@fosroc.com enquiryhongkong@fosroc.com enquiry.indonesia@fosroc.com enquirysingapore@fosroc.com
www.fosroc.com
Page 2 Ref: ProofOGP/DS/09/20
Safety Datasheets
SAFETY DATA SHEET
1: IDENTIFICATION OF THE SUBSTANCE/PREPARATION OF THE
COMPANY/UNDERTAKING
Product Name: Proofex OGP
Application: Synthetic waterproofing membrane.
Company: Al Gurg Fosroc LLC
Address: P O Box 657, Dubai, United Arab Emirates
Telephone: +971 4 2039699 Fax: +971 4 2859649
2: COMPOSITION/INFORMATION ON INGREDIENTS
All constituents of this product are in EINECS (European Inventory of Existing Commercial Chemical Substances) or
ELINCS (European list of New Chemical Substances) or are exempt.
3: HAZARDS IDENTIFICATION
Non- hazardous
Email: uk@fosroc.com
2: HAZARDS IDENTIFICATION
Hazard description:
Xi Irritant
F Highly flammable
N Dangerous for the environment
Danger
Warning
Response:
P303+P361+P353IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with
water/shower.
P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing.
Storage:
P405 Store locked up.
Disposal:
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical characterization
Description: Mixture of substances listed below with nonhazardous additions.
Dangerous components:
CAS: 64742-49-0 Kookpuntbenzine 25 – 50%
EINECS: 265-151-9 Xn, Xi, F, N; R 11-38-51/53-65-67
Danger: 2.6/2; 3.10/1
Warning: 3.2/2, 3.8/3
4.1.C/2
CAS: 110-82-7 Cyclohexane 10 – 25%
EINECS: 203-806-2 Xn, Xi, F, N; R 11-38-50/53-65-67
Danger: 2.6/2; 3.10/1
Warning: 4.1.C/1; 3.2/2, 3.8/3
CAS: 141-78-6 ethyl acetate 10 – 25%
EINECS: 205-500-4 Xi, F; R 11-36-66-67
Danger: 2.6/2
Warning: 3.3/2, 3.8/3
CAS: 136-23-2 zinc bis(dibutyldithiocarbamate) < 2.5%
EINECS: 205-232-8 Xi, N; R 36/37/38-43-50/53
Warning: 4.1.C/1; 3.2/2, 3.3/2, 3.4.S/1, 3.8/3
Additional information: For the wording of the listed risk phrases refer to section 16
After inhalation: In case of unconsciousness place patient stably in side position for transportation.
After skin contact: Immediately wash with water and soap and rinse thoroughly.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: If symptoms persist consult doctor.
Person-related safety precautions: Wear protective equipment. Keep unprotected persons away.
Measures for environmental protection:
Prevent seepage into sewage system, work-pits and cellars.
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Ensure adequate ventilation.
Storage:
Requirements to be met by storerooms and receptacles: Store in a cool location.
Information about storage in one common storage facility: Not required.
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed receptacles.
Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-
contained respiratory protective device.
Use suitable respiratory protective device in case of insufficient ventilation.
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/the chemical
mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation·
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from
manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material
cannot be calculated in advance and has therefore to be checked prior to the application.
Eye protection:
Form: Fluid
Colour: Black
Odour: Characteristic
Change in condition
Melting point/Melting range: Undetermined
Boiling point/Boiling range: 60°C
Explosion limits:
Lower: 1.2 Vol %
Upper: 11.5 Vol %
Acute toxicity:
LD/LC50 values relevant for classification:
110-82-7cyclohexane
Oral lD50 12705 mg/kg (rat)
Ecotoxical effects:
Remark: Toxic for fish·
General notes:
Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.
Also poisonous for fish and plankton in water bodies.
Toxic for aquatic organisms
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
IMDG Class: 3
UN Number: 1133
Label 3
Packaging group: III
EMS Number: F-E,S-D
Marine pollutant: Yes - Symbol (fish and tree)
Proper shipping name: ADHESIVES
ICAO/IATA Class: 3
UN/ID Number: 1133
Label 3
Packaging group: III
Proper shipping name: ADHESIVES
Xi Irritant
F Highly flammable
N Dangerous for the environment
Xi Irritant
F Highly flammable
N Dangerous for the environment
Safety phrases:
3 Keep in a cool place
9 Keep container in a well-ventilated place
16 Keep away from sources of ignition - No smoking
21 When using do not smoke
23 Do not breathe fumes
57 Use appropriate container to avoid environmental contamination
National regulations:
Class Share in %
NK 56.7
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product
features and shall not establish a legally valid contractual relationship.
Relevant R-phrases
11 Highly flammable
36 Irritating to eyes
36/37/38 Irritating to eyes, respiratory system and skin
38 Irritating to skin
43 May cause sensitization by skin contact
50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment
51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment
65 Harmful: may cause lung damage if swallowed
66 Repeated exposure may cause skin dryness or cracking
67 Vapours may cause drowsiness and dizziness.
Abbreviations and acronyms:
ADR: Accord European sur le transport des merchandises dangerousness par Route (European Agreement concerning the
International Carriage of Dangerous Goods by Road)
RID: Regalement international concernant le transport des merchandises dangerousness par chemin de fer (Regulations
Concerning the International Transport of Dangerous Goods by Rail)
IMDG: International Maritime Code for Dangerous Goods
IATA: International Air Transport Association
IATA-DGR: Dangerous Goods Regulations by the "International Air Transport Association"
(IATA) ICAO: International Civil Aviation Organization
ICAO-TI: Technical Instructions by the "International Civil Aviation Organization" (ICAO)
GHS: Globally Harmonized System of Classification and Labeling of Chemicals
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent·
* Data compared to the previous version altered.
Date Printed: 01/04/2011 Issue No: 01 MSDS Reference: FOSROC/ Proofex OGP Adhesive
Equipment
It is suggested that the following list of protective clothing ,equipment , tools ,accessories and list of
testing equipments are available :
Protective clothing
1- Protective overalls
2- Good quality gloves
Application equipment
A- LEISTER TRIAC AT (control electric): for single welding (hot air gun)
B- LEISTER VARIMAT : for automatic single welding
C- LEISTER TWINNY T/S : for automatic double seam welding
Application tools
A- knife cutters
B- one arm rubber and metal rollers for LEISTER TRIAC AT
C- screw drivers with hook finish
Accessories
Testing equipments
www.fosroc.com
constructive solutions
1.1 Clean all concrete surfaces and assure them to be free of laitance, dust, dirt, cavities,
projecting nibs etc.
1.3 Wall/Floor slab junctions should be made smooth using a sand/cement mortar fillet.
METAL DECK SUBSTRATE: Lay a suitable vapour barrier as determined by the Engineer.
Lay suitable insulation boards on top of the vapour barrier as determined by the Engineer.
Mechanically fix the insulation boards to the metal deck using plastic tubes and carbon
screws as determined by the Engineer.
2.2 Lay the first roll of Fosroc Proofex OGP/ORG and mechanically fix it to the substrate along
the roll edge using plastic tubes and carbon screws, fixed at least 30mm into the substrate.
2.3 Lay adjacent roll making sure that 80mm overlap is achieved, continue with other rolls.
2.4 Prepare the LEISTER welding equipment (or equivalent) to the required temperature of
approximately 350 degree C.
Note: carrying out a sample of the welding after temperature calibration is recommended to achieve
correct consistency of weld.
2.5 Spot weld the first 30mm of the overlap area (from inside) at 300-500mm centres along the
membrane using the LEISTER TRIAC AT
2.6 After completing the spot welding pre-weld the joints using the LEISTER TRIAC AT
2.7 Complete the full welding using the LEISTER TRIAC AT with rubber roller
2.8 When using the LEISTER VARIMAT automatic machine there is no need for the spot and
pre-welding process
Page 2 of 4
constructive solutions
2.9 Extend the ends of the horizontal membrane for a further 300 mm for subsequent welding
with vertical membrane at upstands.
2.10 When changing the directions of the membrane where T-case is expected then all joints
under the over lapped locations should be welded and melted again using the metal rollers
along with LEISTER TRIAC AT. Otherwise patch strip to be used.
2.11 Non permanently exposed horizontal areas shall be protected by either a cement sand
screed of minimum thickness 50mm or by using a non woven polypropylene geotextile of 140
gr/m2
3.1 Fix Fosroc Proofex Metal Strip at required height of upstand with TPO coated face exposed.
3.2 Weld Fosroc Proofex OGP/ORG to Fosroc Proofex Metal Strip then to adjoining horizontal
membrane. (See standard CAD details)
3.3 Finish off with Nitoseal MS60 sealant and Flashing to suit.
4.0 Testing
After completing the welding of any joint it is recommended to pass this screw driver with
hook finish along the joints with some side push to make sure that the joints are welded
properly.
Defects rectified by welding a fresh piece of membrane over the affected area.
Page 3 of 4
constructive solutions
A- Apply some foam (water and soap) on top of the location to be tested
B- Fix the vacuum box on top of this location
C- Connect the vacuum box to a suction pump
D- The membrane will start showing bubbles if there are punctures in the membrane or there
has been a substandard welding of the joints
This method statement is offered by Fosroc as a ‘standard proposal’ for the application of Fosroc
Proofex OGP/ORG. It remains the responsibility of the Engineer to determine the correct method for
any given application. Where alternative methods are to be used, these must be submitted to Fosroc
for approval, in writing, prior to commencement of any work. Fosroc will not accept responsibility or
liability for variations to the above method statement under any other condition.
Page 4 of 4
Test Reports
Fosroc Singapore
6 Serangoon North Avenue 5 #02-05
Singapore 554910
Inspection:
Place of inspection:
Laboratory Business Unit Marano Ticino (Italy)
Date of inspection:
15 July 2020
This certificate includes n. 6 pages
The undersigned, inspector to Bureau Veritas, certifies that the here above mentioned supply was
inspected in conformity with the applicable requirements of the purchase order and the contractual
requirements governing the mission entrusted by Bureau Veritas without any remarks.
Inspected by:
Name: Stamp & Signature:
Daniela Mannina
Trade Mark:
PROOFEX PGP
Thickness Surface
Batch ref. Compound Reinforcement Intended for
(or Weight) finishing
21/05/2020 - IM 2000000528 1,5 mm
PVC-P --- --- EN 13361 – EN 13362 – EN 13491
19/05/2020 – IM 2000000468 2,0 mm
Type of Test Unit Standard Acceptance Reference Values Measured values Document
ref deviation (for nominal thickness) (for nominal thickness) ref.
TECNOPIEMONTE
kN EN 12236 ≥ 2,5 3 2,58 3,12
00879/38/65
Water impermeability Mpa EN 1928 ≥ 0,5 Pass test BV-S.PGP-WT/11.05.06
(*) Test performed by the thickness 2 mm; Test witnessed only by the thickness 1,5 mm.
2/8
Stamp & Segnature:
Trade Mark:
PROOFEX OGP
Production Reference Composition
Batch ref. Compound Reinforcement Thickness (or Weight) Surface finishing Intended for
8. Reviewed following Manufacturer declarations and tests Report (Not witnessed by Bureau
Veritas)
Type of Test Unit Standard Acceptance Reference Values Measured Values Document
ref. deviation (for nominal (for nominal ref.
thickness) thickness)
Trade Mark:
PROOFEX ORG
Batch ref. Compound Reinforcement Thickness (or Surface finishing Intended for
Weight)
21/02/2020 - IM 2000000273 1,2 mm
TPO-FPA Glass fiber --- EN 13956
12/02/2020 - IM 1900000182 1,5 mm
10. Reviewed following Manufacturer declarations and tests Report (Not witnessed by Bureau
Veritas)
Type of Test Unit Standard Acceptance Reference Values Measured Values Document
ref deviation (for nominal (for nominal Ref.
thickness) thickness)
4/8
Stamp & Segnature:
Dim. Stability Long % EN 1107-2 ≤ 0,1 0,06
DS-S/09.562.283
Dim. Stability Trasv. % EN 1107.2 ≤ 0,1 0,01
EN 1931
Water Vapour transmission μ MET. B
± 30% 50000 56430 Pass WVT-S/09.562.283 (**)
Resistance Static Load EN 12370
- Soft support Kg MET. A ≥ 20 20 Pass BV-S.ORG-SL/11.05.07
- Hard support MET. B ≥ 25 25 Pass SL-S/09.562.283
Water impermeability kPa EN 1928-B ≥ 60 60 WT-S/09.562.303
Ist. Politecnico 04/1998
Hail resistance m/s EN 13583 ≥ 26 29
(**)
Durability
-- NL ITC Report (**)
- Resistance UV (2500h) - EN 1297 NL
3503/RP/02
- cold flexibility after expos UV °C EN 495-5 ≤ ≤ -30 -30
Ageing in air
- Tensile Strength L/T N/mm2 EN 12311-2 ≥ -5 % VN 721/601 OX-S/09-562.313 (**)
- Elongation L/T % EN 12311-2 ≥ -5 % VN 1001/956
BV-S.ORG-WA/11.05.89
Water absorbition % UEatc ≤ 2% 1,21 1,49
WA-S/09.562.313
CSTC DE651 XC 797
Wind uplift resistance Pa UEatc ≥ 5600 5500
(**)
Cert Fire Lab
Fire Rating Euroclass EN 13501-1 --- E E
FLTKE2157207 (**)
University Liegi
Resistance to micro organism -- EN 846 Liv 2 --- Resist Pass
5/65.828/3 (**)
Root resistance -- EN:13948 --- Resist Pass BDA KEUR 0106-L-10/1
D.M.
Cert.Camera Comm.
Contact with potable water -- 06/04/2004 -- No toxic No toxic
7166/2011 (**)
nr. 174
(*) Test performed by the thickness 1,5 mm; Test witnessed only by the thickness 1,2 mm.
(**) Independent test of the thickness or carried on inferior thickness and applicable on greater thickness
Trade Mark:
PROOFEX OFB
Thickness Surface
Batch ref. Compound Reinforcement Intended for
(or Weight) finishing
20/06/2019 - IM 1900000890 1,2 mm Polyeter
14/11/2019 - IM 1900001631 TPO-FPA ---- 1,5 mm fleece on the EN 13956
bottom
5/8
Stamp & Segnature:
12. Reviewed following Manufacturer declarations and tests Report (Not witnessed by Bureau
Veritas)
Type of Test Unit Standard Acceptance Reference Values Measured Values Document
ref deviation (for nominal thickness) (for nominal thickness) Ref.
Trade Mark:
PROOFEX ORF
Production Reference Composition
Batch ref. Compound Reinforcement Thickness (or Weight) Surface finishing Intended for
6/8
Stamp & Segnature:
13. Witnessed following Manufacturer tests:
14. Reviewed following Manufacturer declarations and tests Report (Not witnessed by Bureau
Veritas)
Type of Test Unit Standard Acceptance Reference Values Measured Values Document
ref. deviation (for nominal (for nominal ref.
thickness) thickness)
Durability
-- ITC Report (**)
- Resistance UV (2500h) - EN 1297 NL NL
3503/RP/02
- Cold flexibility after expos UV °C EN 495-5 ≤ - 30 -30
Ageing in air:
- Tensile Strength L/T N/50mm EN 12311-A ≥ -5 % VN 1070 / 1064 OX-S/20.019.853.9
- Elongation L/T % EN 12311-A ≥ -5 % VN 25,4 / 24,9
Wind uplift resistance FM rating FM ASt 4470 105 FM Class PASS FM Approval 3063900
Fire test FM rating ASTM E 108 Class A-1/4 in 12 PASS FM Approval 3063900
University Liegi /65.828/3
Resistance to micro organism -- EN 846 Liv 2 --- Resist Pass
(**)
Root resistance -- EN:13948 --- Resist Pass BDA KEUR 0106-L-10/1
7/8
Stamp & Segnature:
Final Result:
All the above mentioned inspections have been found in compliance with the Standard mentioned on
the Manufacturer Technical Data Sheet Declaration and EN Standard Applicable.
8/8
Stamp & Segnature:
Fosroc offers a full range of construction chemical solutions, helping to protect structures
throughout the world. Please refer to our brochures, which include:
www.fosroc.com
Important Note
Fosroc products are guaranteed against defective materials and manufacture and
are sold subject to its standard terms and condition of sale, copies of which may
be obtained on request. Whilst Fosroc, endeavors to ensure that any advice,
recommendation, specification or information it may give is accurate and correct,
it cannot, because it has no direct or continuous control over where or how its
products are applied, accept any liability either directly or indirectly arising from
the use of its products, whether or not in accordance with any advice, constructive solutions
specification, recommendation or information given by it.