Professional Documents
Culture Documents
Centre For Admissions
Centre For Admissions
2. Valid student Visa / PIO /OCI card (In case of Citizen of Indian Origin).
3. Proof of Financial support like parents bank statement for the last six months or
scholarship offer letter from the Government /other agencies
6. Mark Sheets of qualifying degree for all the semesters / Consolidated Mark
Sheet.
7. Qualifying Degree Certificate / Provisional Certificate
9. If the student has studied in a University other than Anna University, then Mode
of Study certificate from the Registrar of respective University has to be
specially obtained as per Annexure – I
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
NOTE:
6. Anna University reserves the right to ask for additional documents if necessary.
1. ADMISSION REQUIREMENTS
1.2. Eligibility and Academic Qualifications required for a M.E. / M. Tech. / M. Arch.
M. Plan. Degree Programmes (Two year):
.
GENERAL:
Candidates satisfying the eligibility conditions given below are eligible to apply.
ELIGIBILITY:
(A) Candidates who have passed all the subjects in the recognized Bachelor’s Degree or
equivalent field and obtained at least 50% in the qualifying degree examination as per AICTE
norms are eligible.
If the candidates produce grade certificates, they have to produce either the actual marks of
equivalent marks for the respective grades. In case equivalent marks range is given for grades by
the respective examination authorities, only the minimum marks applicable to the grades in the
eligible subjects will be taken into account. The candidates should provide equivalent mark or
mark range for grades from the respective board only.
The candidate has to provide a pass certificate, if it is not clear from the mark sheet whether the
candidate has passed all the subjects. Mark sheets with voluminous data or confusing formats will
not be accepted. The decision of Anna University will be final in case of any ambiguity in the
eligibility criteria.
Page 3 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
Note:
o Admission shall be offered only to the candidates who possess the qualification prescribed
against each course. (Refer Annexure – II).
o Any other relevant qualifications which are not prescribed against each programme, the
candidates should obtain eligibility certificate from the Director (Academic Courses), Anna
University, Chennai – 600 025.
1.3. Registration Fee: US $ 200 (+18% GST) (Use Debit Card / Credit Card)
The Transaction charges for online payment, if any, should be borne by the candidate..
The Counseling for Admission for the Academic year 2021-2022 will be conducted only through
Online. Once the Rank list has been published, the Web Portal for exercising the choice of the
branch of study will be available.
IMPORTANT:
The Candidates are informed that admission will only be Provisional. If the candidate is
found ineligible on verification of original certificates by the Competent Authority, they
cannot claim any right for admission or continuation of study at any stage.
Page 4 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
ANNEXURE - I
No. Dated:
Mr./Ms. ……………………….w a s a f u l l t i me r e gu l a r s tu de nt of t h i s Un i v e r s i t y
d u r i ng t he ab o ve pe r i od . H e /S he has qua l i f i e d for th e award of th e
… … … … … … … …. Degree with……………… CGPA/Percentage in Academic year 20…… -
20…….
This certificate is issued to enable Mr./Mrs. ………..……….. to apply for Higher Studies.
REGISTRAR
(Signature, Designation & seal
of the issuing authority)
Page 5 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
ANNEXURE – II
. FACULTY OF CIVILENGINEERING
Sl.
No. P.G Programmes Eligible Qualifications
Page 6 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
12.
M.E. Environmental Engineering B.E. / B.Tech.
1. CivilEngineering
2. Agricultural and IrrigationEngineering
3. EnvironmentalEngineering
4. ChemicalEngineering
5. Geo-informaticsEngineering
6. B.Tech. (Energy and Environmental Engineering)
of TamilnaduAgricultural University,Coimbatore.
(or)
B.E. /B. Tech.
7. Mechanical Engineering (sponsored candidates
from Governmentorganizations)
8. Electrical Engineering (with 3 years of
relevant experience) (sponsored candidates
from Government organizations)
9. Civil and Structural
Engineering
10. Agriculture Engineering
Page 7 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
14.
M.E. Environmental Engineering and B.E. / B.Tech.
Management 1. CivilEngineering
2. Agricultural and Irrigation Engineering
3. Bio-Technology
4. Industrial Bio-Technology
5. Chemical and Electrochemical Engineering
6. Geo-informatics Engineering
7. Chemical Engineering
8. Mechanical Engineering with 3 years’ experience
in the field of Environmental Management /
Environmental Engineering
9. Electrical and Electronics Engineering with 3
years’ experience in the field of Environmental
Management / Environmental Engineering
15. B.E. / B.Tech.
M.E. Hydrology and Water 1. Civil Engineering
Resources Engineering 2. Agricultural Engineering
3. Agricultural and Irrigation Engineering
16. M.E. Irrigation Water Management
Page 8 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
B.E. / B.Tech.
1. MechanicalEngg. 6.Mechatronics
2. AeronauticalEngg. 7. IndustrialEngg.
3. M.Tech. Aviation Technology 3. ProductionTech./Engg. 8. ManufacturingEngg./Tech.
4. AerospaceTech. 9. Mechanical and AutomationEngg
5. Electronicsand 10. Robotics &Automation
CommunicationEngg.
B.E. / B.Tech.
4. 1. AutomobileEngg. 4. Manufacturing Engg./Tech.
M.E. Automobile Engineering 2. MechanicalEngg. 5.Mechatronics
3. ProductionEngg./Tech. 6. Mechanical and AutomationEngg.
7. Robotics & Automation
B.E. / B.Tech.
5. M.E. Automotive Engineering 1. MechanicalEngg.
2. ProductionEngg./Tech.
3. AutomobileEngg.
4. Electronics and CommunicationEngg.
5. ManufacturingEngg./Tech.
6. Mechatronics
7. Electrical and ElectronicsEngg.
8. Mechanical and AutomationEngg
9. Robotics &Automation
B.E. / B.Tech.
6. M.E. Advanced Manufacturing 1. MechanicalEngg. 7. IndustrialEngg.
Technology 2. ProductionEngg./Tech. 8.Metallurgy
3. AutomobileEngg. 9. Material Science andEngg
4. ManufacturingEngg./Tech. 10. ComputerIntegrated
5. MiningEngg. Manufacturing
6. Mechanical and AutomationEngg
B.E. / B.Tech.
7. M.E. Cryogenic Engineering 1. MechanicalEngg. 4. MarineEngg.
2. AeronauticalEngg. 5. AutomobileEngg.
3. ProductionEngg./Tech. 6. Mechanical and AutomationEngg
B.E. / B.Tech.
8. M.E. Computer Integrated 1. MechanicalEngg. 7. Metallurgy
Manufacturing 2. AutomobileEngg. 8. IndustrialEngg.
3. ProductionEngg./Tech. 9. Mechatronics
4. ManufacturingEngg./Tech. 10. Material Science andEngg.
5. Computer Integrated Manufacturing 11. Robotics &Automation
6. Mechanical andAutomationEngg 12. MetallurgicalEngineering
Page 9 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
Page 10 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
Sl.
No. P.G Programmes Eligible
Qualifications
B.E. / B.Tech.
19. M.E. Internal Combustion 1. MechanicalEngg. 5. Mechanical and AutomationEngg
Engineering 2. AutomobileEngg. 6. Robotics &Automation
3. Mechatronics
4. MarineEngg.
B.E. / B.Tech.
20. M.E. Lean Manufacturing 1. MechanicalEngg.
2. ProductionEngg./Tech. 6. IndustrialEngg.
3. AutomobileEngg. 7. ManufacturingEngg./Tech.
4. AerospaceTech. 8. AeronauticalEngg.
5. Mechanical and AutomationEngg
B.E. / B.Tech.
21. M.E Mechatronics 1. MechanicalEngg. 9 . Electronics and
2. AutomobileEngg. InstrumentationEngg.
3. ProductionEngg./Tech. 10. Electronics and
4. ElectronicsEngg. CommunicationEngg.
5. AerospaceTech. 11. Mechatronics
6. Computer Science &Engg. 12. ManufacturingEngg./Tech.
7. Electrical and Electronics 13. InstrumentationEngg.
Engg. 14. AeronauticalEngg.
8. Instrumentation and 15. Mechanical and Automation
ControlEngg. Engg
16. Robotics & Automation
B.E. / B.Tech.
22. M.E. Manufacturing Engineering 1. ProductionEngg./Tech. 7. Mechatronics
2. AutomobileEngg. 8. Material Science andEngg.
3. MechanicalEngg. 9. Rubber and PlasticsTech.
4. IndustrialEngg. 10. Polymer Engg/Tech.
5. Metallurgy 11. Mechanical and Automation
6. ManufacturingEngg./Tech Engg.
12. Robotics &Automation
13. MetallurgicalEngineering
B.E. / B.Tech.
23. M.E. Manufacturing Engineering 1. AeronauticalEngg. 10. ProductionEngg./Tech.
(with specialisation in Green 2. AutomobileEngg. 11. ManufacturingEngg./Tech.
Manufacturing) 3. CivilEngg. 12. Computer Science andEngg.
4. MechanicalEngg. 13. InformationTechnology
5. IndustrialEngg. 14. Electronicsand
6. ElectricalandElectronics Instrumentation Engg.
Engg. 15. Electronicsand
7. ChemicalEngg. CommunicationEngg.
8. Rubber and PlasticTech.
9. Mechanical and AutomationEngg
Page 11 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
B.E. / B.Tech.
31. M.Tech. Renewable Energy 1. Bio-Technology 8. AutomobileEngineering
2. ChemicalEngg. 9. Manufacturing Engg./Tech.
3. IndustrialBio-Technology 10. ProductionEngg./Tech.
4. ElectrochemicalEngg. 11. IndustrialEngg.
5. MechanicalEngg. 12. PetrochemicalTechnology
6. Chemical & ElectrochemicalEngg.
Page 12 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
Sl.
No. P.G Programmes Eligible
Qualifications
B.E. / B.Tech.
32. M.E. Solar Energy 1. MechanicalEngg.
2. EnergyEngg.
3. Energy and EnvironmentalEngg.
4. Mechanical and EnergyEngg.
5. Electrical and ElectronicsEngg.
6. AgriculturalEngineering
7. Mechanical and AutomationEngg
B.E. / B.Tech.
33. M.E. Thermal Engineering 1. MechanicalEngg. 6.Mechatronics
2. ProductionEngg./Tech. 7. MarineEngg.
3. AutomobileEngg. 8. IndustrialEngg.
4. AeronauticalEngg. 9. ManufacturingEngg./Tech.
5. AerospaceTech. 10. Mechanical and AutomationEngg
11. Robotics & Automation
B.E. / B.Tech.
34. M.E. Virtual Prototyping and 1. CivilEngg. 6. IndustrialEngg.
Digital Manufacturing 2. MechanicalEngg. 7.Mechatronics
3. ProductionEngg./Tech. 8. Computer Science andEngg.
4. AutomobileEngg. 9. Robotics &Automation
5. Manufacturing Engg./Tech. 10. Mechanical and AutomationEngg
B.E. / B.Tech.
35. M.E. Welding Technology 1. MechanicalEngg. 7.Mechatronics
2. ProductionEngg./Tech. 8. MarineEngg.
3. AutomobileEngg. 9. IndustrialEngg.
4. Metallurgy 10. ManufacturingEngg./Tech.
5. AeronauticalEngg. 11. Material Science andEngg.
6. AerospaceTech. 12. Mechanical and AutomationEngg.
13. Robotics &Automation
14. MetallurgicalEngineering
Page 13 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
Sl.
No. P.G. Programmes Eligible Qualifications
Page 14 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
Page 15 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
Page 16 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
B.E. / B.Tech.
1. Electronics and CommunicationEngg.
18. M.E. Multimedia Technology 2. InformationTechnology
3. Computer Science andEngg.
4. SoftwareEngineering
5. Computer and CommunicationEngg.
19. M.Tech. Information Technology
(with Specialization in Multimedia)
Page 17 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
Page 18 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
Page 19 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
V. FACULTY OF TECHNOLOGY
Page 20 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
Page 21 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
Page 22 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
Page 23 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
Page 24 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
M.Sc.
14. PolymerScience
15. Chemistry with PolymerSpecialisation
16. AppliedChemistry
Page 25 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
Page 26 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
Page 27 of 28
M. E. / M. Tech. / M. Arch. / M. Plan- FN 2021
3. M. Arch. Environmental
Architecture
7. M. Arch Conservation
1. B.Plan.
2. B.Arch.
3. B.E. (CivilEngg.)
4. AIIA*
M.A. / M.Sc.
8 M.Plan. i) Geography
ii) Economics
iii) Sociology
iv) Social W ork with Communitydevelopment
specialisation and RuralDevelopment.
* Candidates who have qualified as AIIA (Associateship Examination of the Indian Institute
of Architects) with a valid registration with the Council of Architecture are eligible.
DISCLAIMER: Only candidates with both B.E./B.Tech. and M.E./M.Tech. in relevant subject are eligible for faculty position
in Engineering and Technology as per AICTE Norms.
16