Professional Documents
Culture Documents
Air Plasma Cutting Machine Lab Manual
Air Plasma Cutting Machine Lab Manual
For
Machine
1
INTRODUCTION
2
Steel and Non-Ferrous metals (oxy/fuel cannot) cleanly and
The torch can also be used for gouging by changing the tip
3
to + - 30 degrees as opposed to the 90 degree used when
cutting.
4
constricts the plasma arc. The tips come in various orifice
replaced when the arc cut becomes too wide. Due to the
the circle and cut towards the circle edge. On piecing the
5
Procedure
Cutter
about 6 kg/cm2