Professional Documents
Culture Documents
Future Innovations - Product List
Future Innovations - Product List
AIR CUBE
THINK OUTSIDE, INSIDE
HOW IT WORKS
• Our proprietary ActivePure® Technology uses light waves and
a catalytic process to produce super oxide ions and hydro peroxides BENEFITS
that destroy contaminants in the air and on surfaces • New & Improved PATENTED ActivePure® Cell destroys over 99% of
• Features a high intensity UVC light that makes use of the same all surface and airborne contaminants faster
• Reduces airborne contaminants and allergens that can trigger
oxidation and ionizing properties of light as naturally occurring
asthma and allergy symptoms
sunlight
• Freshens air and removes odors in otherwise stale-prone
• Certified Space Technology continuously protects and purifies the environments
environment • Removes dirt and dust from the air to make cleaning easier
• Proven effective in independent studies against bacteria, viruses, • Portable, no installation required
mold and fungi in the air and on surfaces • Destroys VOCs, smoke and odors
S P E C I F I C AT I O N S :
00747 Model A1041A
UNIQUE FEATURES
Aerus Pure &
NOTE: This product does not meet California requirements and cannot be shipped to
Clean+ California or Canada. • Positive and Negative Multipoint and RF Ion Generation
• Five Speed Fan
Aerus Pure & 00746 (ozone free) Model A1040A**
Clean *MEETS CALIFORNIA OZONE EMISSIONS LIMIT. CARB CERTIFIED . • Adjustable Purifier Control (A·PURE+ only)
• LED Display
ActivePure® Cell 1 included • Maintenance Reminders
• Depart Room Mode with Adjustable Digital Timer
Input Voltage: 100 ~ 240 VAC; 50/60 Hz external power supply;
Electrical DC 24 Volts; 1.5 Amps Max. • Replaceable ActivePure® Cell
Power Consumption: 43 Watts Max. • Removable Rear Grill
• Universal Power Supply with cords
Mechanical Nominal Airflow Rate: 40-60 CFM Fan
• HEPA and Activated Carbon Filters
Dimensions 11.75” H x 9.5” W x 10” D (29.8 cm x 24.1 cm x 25.1 cm)
Operating
34ºF – 100ºF
Temperature Before ActivePure® Technology After 8 hours with
ActivePure® Technology
Coverage 500 sq. ft. to 3,000 sq. ft. (42 m2 to 279 m2)
Before and af ter laborator y te sts showing reductions of
airborne contaminants with the ActivePure ® Technology.
Warranty Limited 3 year warranty
Based on preliminary test results. Field results may vary. Results do not constitute scientific
substantiation.
The ActivePure® Technology built into each Aerus Pure & Clean+ is based on a variation of the
technology originally developed for use on the International Space Station and is recognized as
the exclusive Certified Space Technology™ in its category.
HOW IT HELPS YOU VOLLARA AIR & SURFACE PRO IS PERFECT FOR:
• Cleaner surfaces and air without using chemicals or • Allergy or asthma sufferers
ozone
• Sensitive or compromised immune systems
• Better sleep
• Athletes
• Fewer sick days and cold/flu outbreaks
• Families
• Fresh-smelling air year-round
• Pet owners
• Healthier living environment
• Business owners
• Improved quality of life
• Caregivers
Bacillus spp.
Pseudomonas spp.
Before ActivePure® Technology
50%
Listeria (L. monocytogenes)
C. albicans
70% S. chartarum
SPECIFICATIONS Avian-Bird Flu (Influenza Virus H5N8)
Norovirus
Technology • ActivePure® Cells (2 included)
hrs hrs hrs hrs
• Positive
Results based and
on laboratory Negative Multipoint and RF Ion
testing
Generation
*Scientific testing has demonstrated the use of ActivePure Technology
to substantially reduce airborne and surface contaminants.
Electrical • 1may
Field results 00vary~ 240VAC
based on environmental conditions. These After 8 hours with ActivePure® Technology
results have
• 5not been evaluated
0/60 by the FDA.
Hz External Power Supply
• DC 24 Volts
• 1.5 Amps Max. – 25 –
• Power Consumption: 43 Watts Max. CONFIDENTIAL & PROPRIETARY INFORMATION • NOT FOR REDISTRIBUTION Before and after laboratory
* Depends on variables such as severity and frequency of pollution, humidity, and temperature.
general commercial
description applications
• Duct or plenum installed natural air system • HVAC systems with accessible ducts
the technology
The activTek INDUCT 2000 substantially reduces odors, target, creating an Advanced Oxidation Process containing
visible smoke in the air, and microbial populations on several friendly oxidizers.
surfaces*, utilizing the patent pending ActivePure technology.
ActivePure consists of a special UV light and photocatalyst
*Published scientific studies conducted on behalf of activTek by Dr. James Marsden at Kansas State University demonstrated that
activTek’s ActivePure® technology substantially reduces microbial populations on surfaces. The study’s results are being provided
solely for informational purposes. The study’s results have not been reviewed by the FDA, EPA or any other governmental agency. Our
products are not medical devices and are not intended to diagnose, treat, or cure any disease. We make no claims and no claims
should be inferred as to the efficacy of our products to sanitize, disinfect or kill germs or other antimicrobials.
specifications
INDUCT 2000 US40532
electrical 100/227 VAC, 50/60 HZ .17A 19 watts*
mechanical UV bulb monitoring system install safety switch installed
dimensions 9.62”H x 9.62”W x 11.25”D 24.5cm L x 24.5cm W x 28.5cm D
weight 3 pounds 1.2 kilograms
max temp 200oF
© 2010 activTek Environmental. All Rights Reserved. * Based on nominal line voltage US20743 revision 0510
ActivePure ® is Registered by activTek Environmental.™
AT_SS_INDUCT2K_US20743_0807rev0110
3:3
35
The activTek INDUCT 2000 is ideally applicable to situations in which accessible
ducts already exist or will be installed and where low maintenance,
no cleaning, or discreet installation might also be an advantage.
applications list
installation details
Treated Air
Treated Air
Optional Installation
Treated Air
Air Handler
Untreated Air
Typical view of an installation
within the duct.
activTek INDUCT 2000 can be installed in any HVAC system 3. The ductwork around the installation area should be clean
directly into the plenum or directly above the air handler in and dry to ensure proper adhesion of the gasket materials
remote or “down stream” locations. and any tape used.
If multiple units are installed in the same plenum area, Electrical Requirements
stagger the installation so all units incur direct air flow. • Installation must be by a licensed HVAC professional.
1. An approximate 4” (10.16 cm) opening will need to be cut
into the existing ductwork to install the unit properly.
2. Unit should be installed after the air handler in the
HVAC system.
Dealer Name
Address1
Address2
City, State, Zip
Phone
Website
36
general commercial
description applications
• Duct or plenum installed natural air system • A
ny building with challenging odor, visible smoke, or
microbials on surfaces with existing ducts
• Discreet or concealed installation
• Restaurants
• 120/220 volt optional installation
• Bars
• UV bulb monitoring indicator included
• Businesses
• Low maintenance – no cleaning required
the technology
The activTek INDUCT 5000 substantially reduces odors, target, creating an Advanced Oxidation Process containing
visible smoke in the air, and microbial populations on several friendly oxidizers.
surfaces*, utilizing the patent pending ActivePure technology.
ActivePure consists of a special UV light and photocatalyst
*Scientific tests have demonstrated the use of activTek air purifiers substantially reduce microbial populations on surfaces – including
but not limited to Escherichia coli, Listeria monocytogenes, Streptococcus spp., Pseudonomas aeruginosa, Bacilus spp., Staphylococcus
TM
aureus, Candida albicans, and S. chartarum. These statements have not been evaluated by FDA. These products are not intended to
diagnose, treat, cure or prevent any disease.
specifications
INDUCT 5000 US40536
electrical 120/240 VAC, 50/60 Hz 20 watts*
mechanical UV bulb monitoring system installed safety interlock switch installed
dimensions 9” W x 9” H x 17” L 23cm W x 23cm H x 43.2cm L
weight 4 pounds 1.8 kilograms
coverage up to 5,000 square feet
max temp 200oF
© 2010 activTek Environmental. All Rights Reserved. * Based on nominal line voltage US20744 revision 0110
ActivePure ® is Registered by activTek™ Environmental.
AT_SS_INDUCT5K_US20744_0707rev0110
3:5
37
The activTek INDUCT 5000 is ideally applicable to situations in which accessible
ducts already exist or will be installed and where low maintenance,
no cleaning, or discreet installation might also be an advantage.
applications list
installation details
Treated Air
Treated Air
Optional Installation
Treated Air
Untreated Air
Notes:
• Installation must be by a licensed HVAC professional.
•T
o properly size the activTek INDUCT 5000 when only the
tonnage is known or given:
• May be wired into 120/220 volt connections.
– 1 ton equals 550 cfm (cubic feet per minute) of air flow.
• Four mounting holes in chassis provide swift installation.
– E
xample: 10 ton AC unit = 10 X 550 = 5,500 cfm or
The activTeck INDUCT 5000 unit size is scaled to
1 activTek INDUCT 5000 (14” single probe unit).
accommodate the various air flow rates of different HVAC
systems. Determine the area you are intending to install – A
ir flow is sometimes listed as scfm (standard cubic feet
activTek INDUCT 5000 into, then pick the model number per minute) which is the same thing and calculated the
that corresponds to that area. same way.
– A
general ‘rule-of-thumb’ is 1 CFM equals 1 square foot of
area served.
Distributed By:
38
3:6
general commercial
description applications
• Duct or plenum installed natural air system • A
ny building with challenging odor, visible smoke, or
microbials on surfaces with existing ducts
• Discreet or concealed installation
• Restaurants
• 120/240 volt optional installation
• Bars
• UV bulb monitoring indicator included
• Businesses
• Low maintenance – no cleaning required
the technology
The activTek INDUCT 10000 substantially reduces odors, target, creating an Advanced Oxidation Process containing
visible smoke in the air, and microbial populations on several friendly oxidizers.
surfaces*, utilizing the patent pending ActivePure technology.
ActivePure consists of a special UV light and photocatalyst
*Published scientific studies conducted on behalf of activTek by Dr. James Marsden at Kansas State University demonstrated that activTek’s ActivePure® technology
substantially reduces microbial populations on surfaces. The study’s results are being provided solely for informational purposes. The study’s results have not been
reviewed by the FDA, EPA or any other governmental agency. Our products are not medical devices and are not intended to diagnose, treat, or cure any disease.
We make no claims and no claims should be inferred as to the efficacy of our products to sanitize, disinfect or kill germs or other antimicrobials.
specifications
INDUCT 10000 US40537
electrical 120/240 VAC, 50/60 Hz 37 watts*
mechanical UV bulb monitoring system installed safety switch installed
dimensions 11” W x 11” H x 17” L 28cm W x 28cm H x 43.2cm L
weight 8 pounds 3.6 kilograms
coverage up to 10,000 square feet
max temp 200oF
*Based on nominal line voltage © 2015 activTek Environmental. All Rights Reserved. ActivePure® is Registered by activTek Environmental.™ US40537
AT_SS_INDUCT10K_US40537_0315
3:7
39
The activTek INDUCT 10000 is ideally applicable to situations in which accessible ducts already exist or will
be installed and where low maintenance, no cleaning, or discreet installation might also be an advantage.
applications list
• Restaurants • Hotels
• Bars • Nursing homes
• Businesses • Office buildings
• Hospitals • Churches
installation details
Treated Air
Treated Air
Optional Installation
Treated Air
Air Handler
Untreated Air
Notes:
• Installation must be by a licensed HVAC professional.
Distributed By:
40
3:8