Professional Documents
Culture Documents
Model 950A Antenna Control System: Full Featured Inverter Drive Control
Model 950A Antenna Control System: Full Featured Inverter Drive Control
Model 950A Antenna Control System: Full Featured Inverter Drive Control
The Antenna Control Unit (ACU) is the primary control and The Manual Control Unit (MCU) provides manually commanded, The Power Drive Unit (PDU) provides all digital control to the Up to 5 HP standard, larger upon request.
nn
monitor interface point for the entire system, featuring a friendly bi-directional control of all axes. AC drive motors and contains the hardware/firmware logic to
touch screen windowed interface. Features:
nn close the position and tracking loops with high resolution. It also
Features
nn
Slim, 1RU chassis provides controlled acceleration and deceleration profile & speed
Optrack, which
PMU functionality regulation range of up to 15:1 with conventional inverter rated AC
provides high motor (antenna system dependant).
performance tracking
The inverter PDU’s are free-standing, housed in an NEMA 4
of stable or inclined
orbit satellites with (IP66 equivalent) aluminum enclosure and contains the electrical/
an adaptive, mechanical components necessary to move the antenna. The
Self-learning PDU contains an internal fan for ambient air circulation and “hot
ephemeris modeling
System Options spot” avoidance and an optional thermostat controlled, internal
mode Fiber Optic ACU-PDU Link
nn heater for cold weather operations. Single speed contactor
Easy touch screen configurations are also supported.
operation
Time Synchronization via NTP
nn
Informative display with full text color readouts Manual Control Unit
nn A lockable handle secures the access door while the system
Extensive diagnostic monitoring and test capabilities
is operating. A Lockout, Tagout power disconnect is provided
Rack mount Tracking Receiver
nn on the cabinet exterior. Mounted in the enclosure is a panel
Antenna and satellite simulators
Extended low temperature operation
nn assembly consisting of the Antenna Control Board (ACB) logic,
Supervisory Control Link Ethernet; TCP/IP
power supply, inverter drives, and various ancillary devices.
Fully software field upgradable Extended Warranty
nn
Status interlocks and position signals report to the ACB and,
PDU configurable for various motor sizes and polarization controls. while in constant communication with the ACU, the ACB
Receiver Options nn
transmits information and receives commands to control
Model 500 series of Tracking Receivers in Analog, or Digital with
nn E-Stops in panel mount or J-Box
nn
movement of any antenna axes.
Spectrum Display.
Communication within the system via Ethernet between ACU,
2 RU Digital Model 550 with dual 5 inch displays
nn TRU, and PDU by a dedicated controller. A second Ethernet
2 RU Analog Model 520 with dual 5 inch displays
nn controller and port provides independent connection to M&C
or customer WAN.
Model 520 or 550 Receiver module mounted behind ACU for zero
nn
additional rack space requirements. System design minimizes cable installation cost and complexity,
and allows for flexible site layout.
Receivers also available with internal block down converters for
nn
common frequency bands Transducers
1:1 Resolver (standard)
nn
Portable Maintenance Unit
0.0055° Resolution,
The Portable Maintenance Unit (PMU) provides manually
0.05° Accuracy
commanded, bi-directional control of all axes.
Standard 16 bit
Features
nn
Position Encoder (option)
nn
Hand held ruggedized unit with a 10-ft pendant cable
0.00001º Resolution,
and 40-ft extension cable for convenient local operation
at the antenna
0.0055º Accuracy
Backup means of moving antenna and is ACU
25-bit Optical
independent
Four line, 20 character display for axis positions, tracking AC Motor Support
signal strength, and scrolling status messages Single or multiple inverter
nn
Modes include position jog and Hi/Lo speed duty windings.
Optional weather proof access junction boxes at
convienient antenna locations Optional Handcrank interlock.
nn
Enable/Disable per axis 208-480v 3 phase voltage
nn
windings available.