This document provides rating data for a heat exchanger unit with the following key details:
- It is a horizontal, shell and tube heat exchanger with one shell and 4.78 square meters of surface area.
- It exchanges heat between compress process gas on the shell side and fuel gas on the tube side.
- Key performance metrics are provided, such as inlet/outlet temperatures and pressures, heat exchanged, and transfer rates.
- Construction details are given for the shell and tubes, including materials used, dimensions, and flow configurations.
This document provides rating data for a heat exchanger unit with the following key details:
- It is a horizontal, shell and tube heat exchanger with one shell and 4.78 square meters of surface area.
- It exchanges heat between compress process gas on the shell side and fuel gas on the tube side.
- Key performance metrics are provided, such as inlet/outlet temperatures and pressures, heat exchanged, and transfer rates.
- Construction details are given for the shell and tubes, including materials used, dimensions, and flow configurations.
This document provides rating data for a heat exchanger unit with the following key details:
- It is a horizontal, shell and tube heat exchanger with one shell and 4.78 square meters of surface area.
- It exchanges heat between compress process gas on the shell side and fuel gas on the tube side.
- Key performance metrics are provided, such as inlet/outlet temperatures and pressures, heat exchanged, and transfer rates.
- Construction details are given for the shell and tubes, including materials used, dimensions, and flow configurations.
Type AEW Orientation Horizontal Connected In 1 Parallel 1 Series Surf/Unit (Gross/Eff) 4.78 / 4.65 m2 Shell/Unit 1 Surf/Shell (Gross/Eff) 4.78 / 4.65 m2 PERFORMANCE OF ONE UNIT Fluid Allocation Shell Side Tube Side Fluid Name compress process gas Fuel gas Fluid Quantity, Total kg/s 1.6500 0.7300 Vapor (In/Out) wt% 100.0 100.0 100.0 100.0 Liquid wt% 0.0 0.0 0.0 0.0 Temperature (In/Out) C 150.00 130.00 25.00 76.62 Density kg/m3 12.226 11.775 16.441 14.104 Viscosity mN-s/m2 0.0158 0.0157 0.0116 0.0125 Specific Heat kJ/kg-C 2.1460 2.1360 1.8530 1.8974 Thermal Conductivity W/m-C 0.0430 0.0430 0.0280 0.0310 Critical Pressure kPa Inlet Pressure kPa 1498.99 1498.99 Velocity m/s 8.44 4.52 Pressure Drop, Allow/Calc kPa 15.764 1.948 Average Film Coefficient W/m2-K 720.37 314.78 Fouling Resistance (min) m2-K/W 0.000125 0.000125 Heat Exchanged 0.0707 MegaWatts MTD (Corrected) 88.1 C Overdesign 1.26 % Transfer Rate, Service 172.68 W/m2-K Calculated 174.86 W/m2-K Clean 183.85 W/m2-K CONSTRUCTION OF ONE SHELL Sketch (Bundle/Nozzle Orientation) Shell Side Tube Side Design Pressure kPaG 1397.67 1397.67 Design Temperature C 150.00 150.00 257.45 mm
No Passes per Shell 1 1
Flow Direction Downward 1.4 m Connections In mm 1 @ 102.261 1 @ 77.927 Size & Out mm 1 @ 102.261 1 @ 77.927 Rating Liq. Out mm @ @ Tube No. 57 OD 19.050 mm Thk(Avg) 1.829 mm Length 1.400 m Pitch 23.813 mm Layout 90 Tube Type Plain Material 304 STAINLESS STEEL (18 CR, 8 NI) Pairs seal strips 0 Shell ID 257.455 mm Kettle ID mm Passlane Seal Rod No. 0 Cross Baffle Type PERPEND. SINGLE-SEG. %Cut (Diam) 25.00 Impingement Plate None Spacing(c/c) 175.000 mm Inlet 418.423 mm No. of Crosspasses 5 Rho-V2-Inlet Nozzle 3301.16 kg/m-s2 Shell Entrance 2930.11 Shell Exit 3042.34 kg/m-s2 Bundle Entrance 394.26 Bundle Exit 409.36 kg/m-s2 Weight/Shell 469.04 Filled with Water 571.79 Bundle 77.94 kg Notes: Thermal Resistance, % Velocities, m/s Flow Fractions Shell 24.27 Shellside 8.44 A 0.095 Tube 68.75 Tubeside 4.52 B 0.399 Fouling 4.89 Crossflow 10.41 C 0.397 Metal 2.08 Window 16.82 E 0.109 F 0.000