Professional Documents
Culture Documents
Turntable System: Operating Instructions
Turntable System: Operating Instructions
Operating Instructions
SL-1200MK5
PP RQT7018-1Y
2
RQT7018
More user manuals on ManualsBase.com
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions
listed below. Keep these operating instructions handy for future reference.
1) Read these instructions. 11) Only use attachments/accessories specified by the manufac-
turer.
2) Keep these instructions.
12) Use only with the cart, stand, tripod, bracket, or
3) Heed all warnings. table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
4) Follow all instructions. when moving the cart/apparatus combination to
avoid injury from tip-over.
5) Do not use this apparatus near water.
13) Unplug this apparatus during lightning storms or when unused
6) Clean only with dry cloth. for long periods of time.
7) Do not block any ventilation openings. Install in accordance with 14) Refer all servicing to qualified service personnel. Servicing is
the manufacturer’s instructions. required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
8) Do not install near any heat sources such as radiators, heat reg- spilled or objects have fallen into the apparatus, the apparatus
isters, stoves, or other apparatus (including amplifiers) that pro- has been exposed to rain or moisture, does not operate normal-
duce heat. ly, or has been dropped.
10) Protect the power cord from being walked on or pinched particu-
larly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
CAUTION:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
¡Reorient or relocate the receiving antenna.
¡Increase the separation between the equipment and re-
ceiver.
¡Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
¡Consult the dealer or an experienced radio/TV technician
for help.
52 mm
4
RQT7018
More user manuals on ManualsBase.com
Putting the player together
In order to prevent damage during shipping some of the equipment
has been disassembled.
1 Fit the turntable and turntable mat.
Put the turntable on the center spindle and then lay the mat
Put the player together in the following order. on top.
•Do not connect the AC power supply cord until set up is complete. •Be very careful when putting the turntable on the main unit.
•Leave the dust cover off until set up and adjustments are com- The magnet on the bottom of the turntable is finely adjusted
plete. and sharp contact can cause it to move and lead to poor
operation. Ensure the magnet remains free from dust and
1 Turntable mat
iron particles.
•Do not adjust the screws attaching the magnet to the turn-
table. The rated performance of the unit cannot be guaran-
teed if the magnet is moved.
Head shell
Screws
Balance weight
Auxiliary weight
5
RQT7018
More user manuals on ManualsBase.com
Connections and installation
Place the unit where it is to be used and adjust the height of the legs
to make the unit horizontal.
Preparatory adjustments
Balanced
Anti-skating control
6
RQT7018
More user manuals on ManualsBase.com
Preparatory adjustments
Index line
Arm height control ring
Armlift screw
Armlift
Armlift height (the distance between the record and stylus when the
cue lever is raised) is set to between 8 and 13 millimeters at time of
shipment.
7
RQT7018
More user manuals on ManualsBase.com
Playing records
Preparation
1. Put a record on the turntable.
1 Turn [power] to turn the unit on.
•The pilot lamp comes on.
2. Take off the stylus cover and release the arm clamp.
•33 1/3 r/min is automatically selected and the indicator lights.
•Press [45] if you are playing a 45 r/min record.
1 3 Indicator
lights
33 45
2 Press [start-stop].
The turntable starts revolving.
start • stop
33
When the player is to be used for scratch play. To light up the stylus
Use the disc slip sheet instead of the turntable mat. This enables •Press the stylus light switch. The stylus light rises up and illumi-
the record to be easily moved during play. nates the stylus.
•Top (printed side): Lay the record on this side. •When the light is not required, press it down. The light also goes
•Bottom: Slippery side. out.
For a different kind of slip Press the switch firmly. If the switch is lightly pressed, the light may
Put the transparent sheet under come on but not rise up.
the disc slip sheet. Disc slip sheet
Transparent sheet
8
RQT7018
More user manuals on ManualsBase.com
Adjustments while using the unit
reset
To measure pitch
The four rows of strobe mirrors around the edge of the turntable can
assist you in measuring pitch.
They are lit by the strobo light as they pass and each row appears to
stand still at a different pitch.
Strobo light
on
off
p o w er
9
RQT7018
More user manuals on ManualsBase.com
Maintenance Product service
Care of the parts 1. Damage requiring service—The unit should be serviced by
qualified service personnel if:
To clean this unit, wipe with a soft, dry cloth. (a) The AC power supply cord or AC adaptor has been
•Never use alcohol, paint thinner, or benzine to clean this unit. damaged; or
•Before using chemically treated cloth, read the instructions that (b) Objects or liquids have gotten into the unit; or
came with the cloth carefully. (c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked
Do not wipe the dust cover while playing a record. change in performance; or
This can cause static electricity. This static can cause the tone arm (e) The unit has been dropped or the cabinet damaged.
to be attracted towards the cover. 2. Servicing—Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servic-
Thoroughly clean dust off the stylus and record. ing to authorized servicing personnel.
•Use a soft brush to clean the stylus. Brush from the base to the tip. 3. Replacement parts—When parts need replacing ensure the
•Use a good quality record cleaner to keep your records clean. servicer uses parts specified by the manufacturer or parts that
have the same characteristics as the original parts.
Unauthorized substitutes may result in fire, electric shock, or
other hazards.
4. Safety check—After repairs or service, ask the servicer to
perform safety checks to confirm that the unit is in proper
Head shell working condition.
terminals
Product information
Wipe the head shell terminals occasionally.
Use a soft cloth. Turn the amplifier off before fitting or removing the For product information or assistance with product operation:
head shell. In the U.S.A., contact the Panasonic Customer Call Center at 1-
•Damage to your speakers can occur if the head shell is moved 800-211-7262, or e-mail consumerproducts@panasonic.com, or the
while the volume is turned up. website (http://www.panasonic.com).
•Leave the stylus cover on while handling the head shell to prevent In Canada, contact the Panasonic Canada Inc. Customer Care Cen-
damaging the stylus. tre at 905-624-5505, or visit the website (www.panasonic.ca), or an
authorized Servicentre closest to you.
Oiling the center spindle.
Apply 2 or 3 drops every 2000 hours of operation. Use SFW0010 oil
(not included). Oil
10
RQT7018
More user manuals on ManualsBase.com
Troubleshooting guide
Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in
the chart do not solve the problem:
In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail consumerproducts@panasonic.com, or the
website (http://www.panasonic.com).
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 905-624-5505, or visit the website (www.panasonic.ca), or an
authorized Servicentre closest to you.
There is power but no sound. Are connections to the amplifier/receiver’s Connect the stereo pin cables to the amplifier’s
5
Sound is weak. PHONO terminals correct? PHONO terminals.
Left and right sounds are re- Are the stereo connection cable connections Double check all connections.
5
versed. to the amplifier or receiver reversed?
Humming heard during play. Are there other appliances or their AC power Separate the appliances and their AC power
supply cords near the stereo connection supply cords from this unit.
cable?
Make sure the earth lead is correctly con-
Is the earth lead connected? 5
nected.
Specifications
Turntable section Tonearm section
Type Quartz direct drive Type Universal
Manual turntable Effective length 230 mm (9-1/16")
Drive method Direct drive Arm height adjustment range 0 – 6 mm
Motor Brushless DC motor Overhang 15 mm (19/32")
Turntable platter Aluminum diecast Effective mass 12 g (without cartridge)
Diameter 33.2 cm (13-5/64") Offset angle 22°
Mass 1.7 kg (3.74 lb.) Friction Less than 7 mg (lateral, vertical)
Turntable speeds 33 1/3 r/min, 45 r/min Tracking error angle
Variable range pitch ±8 % Within 2° 32' (at the outer groove of 30 cm (12") record)
Starting torque 1.5 kg·cm (1.3 lb·in) Within 0° 32' (at the inner groove of 30 cm (12") record)
Build-up characteristics 0.7 s. from standstill to 33 1/3 r/min Stylus pressure adjustment range 0–4g
Braking system Electronic brake Applicable cartridge weight range 3.5 – 13 g
Wow and flutter 0.01 % WRMS\ 11 – 20.5 g (including headshell)
0.025 % WRMS (JIS C5521) (with auxiliary weight) 9.5 – 13 g
±0.035 % peak (IEC 98A Weighted) 17 – 20.5 g (including headshell)
Rumble –56 dB (IEC 98A Unweighted) (with shell weight) 3.5 – 6.5 g
–78 dB (IEC 98A Weighted) 11 – 14 g (including headshell)
\This rating refers to turntable assembly alone, excluding effects Headshell weight 7.5 g
of record, cartridge or tonearm, but including platter. Measured
by obtaining signal from built-in frequency generator of motor General
assembly. Power supply AC 120 V, 60 Hz
Power consumption 13.5 W
Dimensions (W×H×D) 45.3 × 17.2 × 35.5 cm
(17-27/32" × 6-25/32" × 13-31/32")
Mass 12 kg (26.4 Ib)
11
RQT7018
More user manuals on ManualsBase.com
This manual was printed with soy based ink.
Panasonic Consumer Electronics Panasonic Puerto Rico, Inc. Panasonic Canada Inc. En
Company, Division of Panasonic Ave. 65 de Infantería, Km. 9.5 5770 Ambler Drive
Corporation of North America San Gabriel Industrial Park, Carolina, Mississauga, Ontario L4W 2T3
One Panasonic Way Secaucus, Puerto Rico 00985 www.panasonic.ca
New Jersey 07094
http://www.panasonic.com
2003 Matsushita Electric Industrial Co., Ltd. RQT7018-1Y
Printed in Japan M0203TK1124