Professional Documents
Culture Documents
Alimak Scando 450: Construction Hoists
Alimak Scando 450: Construction Hoists
PRODUCT GUIDE
Superior comfort
Frequency control
provides very smooth
starting and stopping with
low starting current and
less wear and tear.
Economical
Reduced cost for fleet
owners and rental
companies due to
flexibility, durability, and
accessibility, leading to
low cost of ownership.
Fuse ratings from 25 A for
low energy consumption.
2
ALIMAK SCANDO 450
INTELLIGENT CONTROL
Accessibility is improved by a modern microprocessor
based control system, ALC-II, which can solve many
site logistic problems. For example, the system
reduces waiting times by storing all calls from the
landings and sending the hoist car that is logistically
nearest to a landing to pick up cargo or passengers.
Alimak Scando 450 can be equipped with a frequency
control unit (FC), with closed-loop, which gives very
smooth starting and stopping with low starting current
and less wear and tear.
3
ALIMAK SCANDO 450
Technical specifications
MAIN CHARACTERISTICS
• Modular car design with extensions and multiple
door and ramp options
• Single and dual car configurations
• Dual entrance possible at ground level and at any
landing level
• A high-efficiency helical gearbox provides lower
power consumption and reduced operational costs
• ALC-II collective control system with group control and
internal fault diagnostics system
• Built-in electrical cabinet maximises internal hoist dimensions for
increased lifting capacity
• Durable materials: Car walls and door cladding of perforated steel
sheeting, with hot dip galvanized steel mast sections. All stainless steel
electrical cabinets and landing control boxes
• Wide range of optional equipment and functions
• Remote monitoring system
• Fully compliant with EN, ANSI, AS, PB and the majority of all national regulations.
* Up to 300 m (984 ft) lifting height on request. The maximum lifting height with 1-motor drive is 100 m (328 ft).
For other demands or specifications, please consult your Alimak representative.
1239 EN/Aug 2020
www.alimak.com
Pictures are illustrative only and do not necessarily show the configuration of products on the market at a given point in time. Products must be used in conformity with safe practice and applicable statutes,
regulations, codes and ordinances. Specifications of products and equipment shown herein are subject to change without notice. Copyright © 2020 Alimak Group. All rights reserved. Alimak and Scando are
registered trademarks of Alimak Group.