The document contains a list of alarm names from a network monitoring system and information about each alarm, including whether it is service affecting, possible root causes and locations. It provides technical details to help identify and troubleshoot issues in the network.
The document contains a list of alarm names from a network monitoring system and information about each alarm, including whether it is service affecting, possible root causes and locations. It provides technical details to help identify and troubleshoot issues in the network.
The document contains a list of alarm names from a network monitoring system and information about each alarm, including whether it is service affecting, possible root causes and locations. It provides technical details to help identify and troubleshoot issues in the network.
The document contains a list of alarm names from a network monitoring system and information about each alarm, including whether it is service affecting, possible root causes and locations. It provides technical details to help identify and troubleshoot issues in the network.
Automatic Version Rollback No Base Station Service Overload No BBU Board Maintenance Link Failure Yes BBU CPRI Interface Error Yes BBU CPRI Optical Interface Performance Degraded Yes BBU CPRI Optical Module Fault Yes BBU CPRI Optical Module or Electrical Port Not Ready Yes BBU DC Output Out of Range No BBU Optical Module Transmit/Receive Fault Yes Board Blocked Yes Board Clock Input Unavailable No Board Hardware Fault No Board Not In Position No Board Not Securely Installed Board Overload Board Powered Off Board Software Auto-Supply Failure Board Software Synchronization Failure Board Type and Configuration Mismatch Cabinet Air Inlet Temperature Unacceptable Carrier Configuration Error Carrier No Traffic Cell Capability Degraded Cell Configuration Abnormal Cell Output Power too Low Cell PCI Conflict Cell Reconfiguration Failed Cell RX Channel Interference Noise Power Unbalanced Cell Unavailable Certificate Invalid Configuration Data Inconsistency Configured Capacity Limit Exceeding Licensed Limit Data Configuration Exceeding Licensed Limit eNodeB S1 Control Plane Transmission Interruption Ethernet Link Fault External Clock Reference Not Configured External Clock Reference Problem Fan Stalled GPS Antenna Fault GPS Locked Satellites Insufficient GSM Local Cell Capability Decline GSM Local Cell Unusable Inter-Board CANBUS Communication Failure Inter-Board Service Link Failure Inter-System Board Object Configuration Conflict Inter-System Cabinet Configuration Conflict Inter-System Communication Failure Inter-System Control Rights Conflict Inter-System RF Unit Parameter Settings Conflict
Confidential Information of Huawei.
09/17/2021 Page1of7 No Spreading without Permission 542734348.xlsx Security Level
IP Clock Link Failure
IP Path Excessive Packet Loss Rate IP PM Activation Failure License Data Loss License on Trial Local Cell Capability Decline Local Cell Unusable MAC Excessive Frame Error Rate Main Control Board in Wrong Slot Monitoring Device Hardware Fault Monitoring Device Maintenance Link Failure No License Running in System Radio Link Failure Radio Signaling Link Disconnected RAT Conflict between separate-MPT Boards Remote Maintenance Link Failure Remote Maintenance Link Running Data and Configuration Mismatch RF Unit Baseband Running Error RF Unit Clock Problem RF Unit CPRI Interface Error RF Unit DC Input Power Failure RF Unit External Power Supply Insufficient RF Unit Hardware Fault RF Unit Maintenance Link Failure RF Unit Optical Interface Performance Degraded RF Unit Optical Module or Electrical Port Not Ready RF Unit Power Surge Protector Fault RF Unit Runtime Topology Error RF Unit RX Channel RTWP/RSSI Too Low RF Unit RX Channel RTWP/RSSI Unbalanced RF Unit Software Program Error RF Unit Temperature Unacceptable RF Unit TX Channel Gain Out of Range RF Unit VSWR Threshold Crossed RF Unit Working Mode and Board Capability Mismatch RRU Cascading Levels and Configuration Mismatch S1 Interface Fault SCTP Link Congestion SCTP Link Fault SCTP Link IP Address Unreachable Sensor Failure Subrack Type and Configuration Mismatch System Clock Failure System Clock Unlocked System Dynamic Traffic Exceeding Licensed Limit Time Synchronization Failure X2 Interface Fault
Confidential Information of Huawei.
09/17/2021 Page2of7 No Spreading without Permission Name BBU Board Maintenance Link Failure Yes BBU CPRI Interface Error Yes BBU CPRI Optical Module or Electrical Port Not Ready Yes BBU Optical Module Transmit/Receive Fault Yes Board Blocked Yes Board Hardware Fault Yes Board Not In Position Yes Board Not Securely Installed Yes Board Software Auto-Supply Failure Yes Board Software Synchronization Failure Yes Cabinet Air Inlet Temperature Unacceptable Yes Cell Capability Degraded Yes/RF Cell PCI Conflict Yes/RF Cell RX Channel Interference Noise Power Unbalanced Yes/RF Cell Unavailable Yes eNodeB S1 Control Plane Transmission Interruption Yes Inter-Board CANBUS Communication Failure Yes RF Unit Clock Problem Yes RF Unit CPRI Interface Error Yes RF Unit DC Input Power Failure Yes RF Unit External Power Supply Insufficient Yes RF Unit Hardware Fault Yes RF Unit Maintenance Link Failure Yes RF Unit Optical Interface Performance Degraded Yes RF Unit Optical Module or Electrical Port Not Ready Yes RF Unit Runtime Topology Error Yes RF Unit RX Channel RTWP/RSSI Too Low Yes RF Unit Software Program Error Yes RF Unit TX Channel Gain Out of Range Yes RF Unit VSWR Threshold Crossed Yes RF Unit Working Mode and Board Capability Mismatch Yes RRU Cascading Levels and Configuration Mismatch Yes S1 Interface Fault Yes SCTP Link Congestion Yes SCTP Link Fault Yes SCTP Link IP Address Unreachable Yes X2 Interface Fault Yes Location Information Cabinet No.=0, Subrack No.=0, Slot No.=3, Board Type=UBBP Cabinet No.=0, Subrack No.=0, Slot No.=3, Port No.=0, Board Type=UBBP, Specific Problem=CPRI Interface Reception Error Cabinet No.=0, Subrack No.=0, Slot No.=3, Port No.=0, Board Type=UBBP Cabinet No.=0, Subrack No.=0, Slot No.=2, Port No.=0, Board Type=UBBP, Specific Problem=Receive No Signal Cabinet No.=0, Subrack No.=0, Slot No.=2, Board Type=UBBP Cabinet No.=0, Subrack No.=0, Slot No.=2, Board Type=UBBP Cabinet No.=0, Subrack No.=0, Slot No.=3, Board Type=UBBP Cabinet No.=0, Subrack No.=0, Slot No.=2, Board Type=UBBP Cabinet No.=0, Subrack No.=0, Slot No.=7, Board Type=UMPT Cabinet No.=0, Subrack No.=80, Slot No.=0, Board Type=MRRU, Possible Cause=Other Internal Errors Cabinet No.=1, Subrack No.=11, Slot No.=0, Board Type=FMU, Specific Problem=Too High eNodeB Function Name=AK0369_L, Local Cell ID=2, Cell FDD TDD indication=FDD, NB-IoT Cell Flag=FALSE, TX Channel Nu eNodeB Function Name=RV0740_L, Local Cell ID=0, PCI Value=215, Downlink EARFCN=1723, Cell FDD TDD indication=FDD eNodeB Function Name=DL0531_L, Local Cell ID=1, Cell FDD TDD indication=FDD, Sector equipment IDChannel No=0_81_0 eNodeB Function Name=DL0575_L, Local Cell ID=0, Cell FDD TDD indication=FDD, NB-IoT Cell Flag=FALSE, Cell Name=DL eNodeB Function Name=DL0575_L, CN Operator ID=0 Cabinet No.=0, Subrack No.=0, Slot No.=1, Board Type=UBBP Cabinet No.=0, Subrack No.=82, Slot No.=0, Board Type=MRRU Cabinet No.=0, Subrack No.=82, Slot No.=0, Port No.=Port 0(West), Board Type=MRRU, Port Type=Uplink, Specific Problem= Cabinet No.=0, Subrack No.=81, Slot No.=0, Board Type=MRRU Cabinet No.=0, Subrack No.=80, Slot No.=0, Specific Problem=Cabinet Power Supply Abnormal Cabinet No.=0, Subrack No.=80, Slot No.=0, Board Type=MRRU Cabinet No.=0, Subrack No.=81, Slot No.=0, Board Type=MRRU Cabinet No.=0, Subrack No.=81, Slot No.=0, Port No.=Port 0(West), Board Type=MRRU, Specific Problem=Reception Power T Cabinet No.=0, Subrack No.=80, Slot No.=0, Port No.=Port 0(West), Board Type=MRRU Cabinet No.=0, Subrack No.=80, Slot No.=0, Board Type=MRRU Cabinet No.=0, Subrack No.=80, Slot No.=0, RX Channel No.=1, Board Type=MRRU, RTWP (0.1 dBm)=-1289 Cabinet No.=0, Subrack No.=81, Slot No.=0, Board Type=MRRU Cabinet No.=0, Subrack No.=82, Slot No.=0, TX Channel No.=0, Board Type=MRRU, Input Power (0.1 dBFs)=-208, Output Po Cabinet No.=0, Subrack No.=82, Slot No.=0, TX Channel No.=1, Board Type=MRRU, VSWR Alarm Threshold (0.1)=14, VSWR Cabinet No.=0, Subrack No.=80, Slot No.=0, RF Unit Working Mode=GL, RF Unit Mode Capability=UL, Board Type=MRRU Chain No.=2, Configured Chain Level=0, Actual Chain Level=1 eNodeB Function Name=DL0575_L, S1 Interface ID=40001, CN Operator ID=0, Description=MME:MCC_621 MNC_20 MMEI_ Link No.=70001, Current transmit buffer usage (%)=80, Congestion Triggering Threshold (%)=80, Congestion Clearance Thres Link No.=70001, Description=NULL, Peer IP Address=192.168.237.84, Service Type=S1-AP Link No.=70001, Description=MME:MCC_621 MNC_20 MMEI_32768_72, Peer IP Address=192.168.237.85, Service Type=S1 eNodeB Function Name=RV0003_L, X2Interface ID=4294967295, CN Operator ID=65535, Description=NULL, Specific Problem Additional Information RAT_INFO=GUL, AFFECTED_RAT=GUL, DID=NULL, Cumulative Duration(s)=10 RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, Cumulative Duration(s)=66 RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, Cumulative Duration(s)=150 RAT_INFO=GUL, AFFECTED_RAT=GUL, DID=NULL RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, Cumulative Duration(s)=10 RAT_INFO=GUL, AFFECTED_RAT=GUL, DID=NULL RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL RAT_INFO=GUL, AFFECTED_RAT=GUL, DID=NULL RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=0-80-0 RAT_INFO=GUL, AFFECTED_RAT=GUL, DID=NULL, Cumulative Duration(s)=30 RAT_INFO=GUL, AFFECTED_RAT=L, DID=NULL, Cumulative Duration(s)=90 RAT_INFO=GUL, AFFECTED_RAT=L, DID=NULL RAT_INFO=GUL, AFFECTED_RAT=L, DID=NULL RAT_INFO=GUL, AFFECTED_RAT=L, DID=NULL, Cumulative Duration(s)=90 RAT_INFO=GUL, AFFECTED_RAT=L, DID=NULL, Cumulative Duration(s)=2 RAT_INFO=GUL, AFFECTED_RAT=GUL, DID=NULL, Cumulative Duration(s)=10 RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=NULL, Cumulative Duration(s)=30 RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=0-82-0, Cumulative Duration(s)=6 RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=0-81-0 RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=NULL RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=0-80-0 RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=NULL RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=NULL, Cumulative Duration(s)=90 RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=0-80-0 RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=0-80-0 RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=0-80-0 RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=NULL RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=NULL RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=NULL RAT_INFO=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=0-80-0 RAT_INFO=GUL, AFFECTED_RAT=GUL, DID=NULL RAT_INFO=GUL, AFFECTED_RAT=L, DID=NULL RAT_INFO=GUL, AFFECTED_RAT=L, DID=NULL RAT_INFO=GUL, AFFECTED_RAT=L, DID=NULL RAT_INFO=GUL, AFFECTED_RAT=L, DID=NULL RAT_INFO=GUL, AFFECTED_RAT=L, DID=NULL Name Service AffLocation InAdditional Information BBU Board Maintenance Link Failure Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GU BBU CPRI Interface Error Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL BBU CPRI Optical Module or Electrical Port Not Ready Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL BBU Optical Module Transmit/Receive Fault Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL Board Blocked Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GU Board Hardware Fault Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL Board Not In Position Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GU Board Not Securely Installed Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL Board Software Auto-Supply Failure Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GU Board Software Synchronization Failure Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL Cabinet Air Inlet Temperature Unacceptable Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GU Cell Capability Degraded Yes/RF eNodeB Fun RAT_INFO=GUL, AFFECTED_RAT=L, D Cell PCI Conflict Yes/RF eNodeB Fun RAT_INFO=GUL, AFFECTED_RAT=L, D Cell RX Channel Interference Noise Power Unbalanced Yes/RF eNodeB Fun RAT_INFO=GUL, AFFECTED_RAT=L, D Cell Unavailable Yes eNodeB Fun RAT_INFO=GUL, AFFECTED_RAT=L, D eNodeB S1 Control Plane Transmission Interruption Yes eNodeB FuRAT_INFO=GUL, AFFECTED_RAT=L, D Inter-Board CANBUS Communication Failure Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GU RF Unit Clock Problem Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL RF Unit CPRI Interface Error Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL RF Unit DC Input Power Failure Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL RF Unit External Power Supply Insufficient Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL RF Unit Hardware Fault Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL RF Unit Maintenance Link Failure Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL RF Unit Optical Interface Performance Degraded Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL RF Unit Optical Module or Electrical Port Not Ready Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL RF Unit Runtime Topology Error Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL RF Unit RX Channel RTWP/RSSI Too Low Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL RF Unit Software Program Error Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL RF Unit TX Channel Gain Out of Range Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL RF Unit VSWR Threshold Crossed Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL RF Unit Working Mode and Board Capability Mismatch Yes Cabinet NoRAT_INFO=GUL, AFFECTED_RAT=GL RRU Cascading Levels and Configuration Mismatch Yes Chain No.=RAT_INFO=GUL, AFFECTED_RAT=GU S1 Interface Fault Yes eNodeB Fun RAT_INFO=GUL, AFFECTED_RAT=L, D SCTP Link Congestion Yes Link No.=7RAT_INFO=GUL, AFFECTED_RAT=L, D SCTP Link Fault Yes Link No.=7RAT_INFO=GUL, AFFECTED_RAT=L, D SCTP Link IP Address Unreachable Yes Link No.= RAT_INFO=GUL, AFFECTED_RAT=L, D X2 Interface Fault Yes eNodeB Fun RAT_INFO=GUL, AFFECTED_RAT=L, D Information O=GUL, AFFECTED_RAT=GUL, DID=NULL, Cumulative Duration(s)=10 O=GUL, AFFECTED_RAT=GL, DID=NULL, Cumulative Duration(s)=66 O=GUL, AFFECTED_RAT=GL, DID=NULL O=GUL, AFFECTED_RAT=GL, DID=NULL, Cumulative Duration(s)=150 O=GUL, AFFECTED_RAT=GUL, DID=NULL O=GUL, AFFECTED_RAT=GL, DID=NULL, Cumulative Duration(s)=10 O=GUL, AFFECTED_RAT=GUL, DID=NULL O=GUL, AFFECTED_RAT=GL, DID=NULL O=GUL, AFFECTED_RAT=GUL, DID=NULL O=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=0-80-0 O=GUL, AFFECTED_RAT=GUL, DID=NULL, Cumulative Duration(s)=30 O=GUL, AFFECTED_RAT=L, DID=NULL, Cumulative Duration(s)=90 O=GUL, AFFECTED_RAT=L, DID=NULL O=GUL, AFFECTED_RAT=L, DID=NULL O=GUL, AFFECTED_RAT=L, DID=NULL, Cumulative Duration(s)=90 O=GUL, AFFECTED_RAT=L, DID=NULL, Cumulative Duration(s)=2 O=GUL, AFFECTED_RAT=GUL, DID=NULL, Cumulative Duration(s)=10 O=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=NULL, Cumulative Duration(s)=30 O=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=0-82-0, Cumulative Duration(s)=6 O=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=0-81-0 O=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=NULL O=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=0-80-0 O=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=NULL O=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=NULL, Cumulative Duration(s)=90 O=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=0-80-0 O=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=0-80-0 O=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=0-80-0 O=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=NULL O=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=NULL O=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=NULL O=GUL, AFFECTED_RAT=GL, DID=NULL, RF Unit Name=0-80-0 O=GUL, AFFECTED_RAT=GUL, DID=NULL O=GUL, AFFECTED_RAT=L, DID=NULL O=GUL, AFFECTED_RAT=L, DID=NULL O=GUL, AFFECTED_RAT=L, DID=NULL O=GUL, AFFECTED_RAT=L, DID=NULL O=GUL, AFFECTED_RAT=L, DID=NULL