Professional Documents
Culture Documents
GU Intelligent Parameter Optimization Data Collection Guide (Manual Collection)
GU Intelligent Parameter Optimization Data Collection Guide (Manual Collection)
GU Intelligent Parameter Optimization Data Collection Guide (Manual Collection)
Preface:
1) This document provides guidance for data collection in the intelligent parameter optimization solution
2)Precautions for data operations:
A. Data must be collected as required.
B. Collect data at night to avoid affecting service quality.
C. Data collection must be performed by the customer to avoid unnecessary disputes.
3) Feedback channels for problems (including tools) encountered during data collection: Leijianrong WX
Feedback channels for data source collection (including tools): Leijianrong WX221696
4) This solution involves CHR data collection. To protect user privacy, related user information has bee
01
essary disputes.
g data collection: Leijianrong WX221696
nrong WX221696
related user information has been anonymized.
Indicates
equirements whether to Other
Format File
Collection Period support Dependen
HQI Reference Format
NIC cies
Mandatory Latest Latest collection.
Y
Mandatory Y Neighboring cell measurement needs to be enabled.
Recommended Y
Recommended Y
Recommended Y
Recommended N
N Deleting data from the data source page
Y Deleting data from the data source page
N Deleting data from the data source page
N
Indicates
llection Requirements whether to Other
Collection File Size
support Dependen
U2G Voice quality Period Format Reference
NIC cies
Mandatory Mandatory collection.
Y
Mandatory Mandatory Y
Recommended Recommended Y
Recommended Recommended Y
Recommended Recommended Y
Recommended N
(Select one from
the two.) Y
Recommended Recommended N
Recommended Recommended Y
Recommended Recommended N
(Select one from (Select one from Y
the two.) the two.)
Y
Recommended Y
urement needs to be enabled.
Collection Purpose
The configuration data of the BSC\RNC is mandatory for this solution. By parsing configuration data, the tool can analyze ke
algorithm switch, and mobility parameters, and compare them with baseline scripts to determine whether parameters and swi
affected, check whether there are hidden troubles that restrict network development.
Data Requirements
The latest data must be collected. The latest data indicates the actual settings of the current network parameters.
To obtain the data, perform the following steps: EXP CFGMML: ENCRYPTMODE=UNENCRYPTED;
Operation platform Command Data storage directory
BSC WebLMT EXP CFGMML/bam/version_a/ftp/export_cfgmml
RNC WebLMT EXP CFGMML/bam/version_a/ftp/export_cfgmml
U2000 MML EXP CFGMML
<<--Back
ata, the tool can analyze key information such as neighboring cell configuration,
whether parameters and switch configurations are appropriate and whether KPIs are
k parameters.
=UNENCRYPTED;
Other Description
It may also be version_b. You can view the specific path from the command ou
It may also be version_b. You can view the specific path in the command outpu
You are advised to obtain the data from the BAM. The U2000 usually backs up
BSC or RNC traffic statistics
Collection Purpose
The traffic statistics data of BSC\RNC is mandatory for this solution. By analyzing the traffic statistics, the tool can evalu
setup failures, call drops, and handover failures, you can analyze the coverage and quality of the radio network, therefore
Data Requirements
1) Corresponding to the time segment to be evaluated and analyzed;
2) Obtain at least *24h data of the latest three days.
3) Only the data related to the *.EMS-NORMAL.mrf.bz2 needs to be obtained. That is, only the data of the normal perio
Precautions
1. For GSM, if frequency analysis and neighboring cell analysis are required, an interference matrix needs to be generated. The
To enable neighboring cell measurement on the U2000, perform the following steps: Start the U2000, click Performance
Measurement set location: Measurements Related to MR->Neighboring Cell Receive Level Measurement->NE Backup
/bam/common/MeasResult
2. For the UMTS network, if the voice quality theme needs to be analyzed, the corresponding function switch must be tu
he traffic statistics, the tool can evaluate the advantages and disadvantages of network KPIs. By analyzing the causes of
uality of the radio network, therefore, traffic statistics are critical.
nce matrix needs to be generated. The traffic statistics to be collected contain counters related to GSM neighboring cell performance measurem
Start the U2000, click Performance->Performance Management->NE Backup, and perform the following steps to export the configurat
e Level Measurement->NE Backup
sponding function switch must be turned on.
Collection Purpose
The CHR/PCHR data provides detailed causes for KPI problems such as access failures, call drops, and handover failures. T
Therefore, the CHR/PCHR data is a powerful supplement to the root cause analysis.
Analyzing CHR data helps network evaluation personnel better understand the radio performance and O&M of the network
Data Requirements
(1) If the collected data contains at least five busy hours, for example, early busy hours and late busy hours, it is recommend
amount exceeds 12 hours, the task may fail or the task analysis takes a long time.
2) The collected time should indirectly reflect the normal network performance. It is not recommended to collect the data of
large number of operation periods. Such data cannot represent the actual network situation.
Remarks: The CHR data generated on each BSC/RNC is related to the network scale and traffic volume. The CHR files are
<<--Back
, and handover failures. The cause values obtained from traffic statistics are rough.
and O&M of the network and effectively analyze RNC and cell faults.
sy hours, it is recommended that the total data amount not exceed 12 hours. If the data
nded to collect the data of a large number of site disconnection periods or the data of a
olume. The CHR files are stored on the BSC/RNC BAM for 24 hours.
BSC or RNC License
Collection Purpose
By checking the license of the BSC\RNC, you can analyze the feature activation and usage of the current network. This
performance.
Data Requirements
1) License that is being used within the evaluation period
2. All the NodeBs under the RNC to be evaluated are included.
Step 02 Select the RNC to be collected, run the DSP LICUSAGE:; command, and then select Save as.. in the com
2 NodeB license Export
Step 01 Log in to the U2000 client and choose License->NE License Management->NodeB.
and usage of the current network. This helps you analyze the gains brought by feature activation to the network
Obtaining Method
e query command to a .txt file by referring to 1 RNC/BSC License collection in the following steps. Alternatively, right-click
e query command to a .txt file by referring to 1 RNC/BSC License collection in the following steps. Alternatively, right-click
eB license export; in the following steps.
, and then select Save as.. in the command output to save the data to the local PC.
ment->NodeB.
NodeB Configuration
Collection Purpose
By parsing the configuration data, the tool can analyze the eNodeB-level parameter configuration, find the problems in the c
Data Requirements
1) Latest NodeB configuration data
2. All the NodeBs under the RNC to be evaluated are included.
Method 1: On the U2000, export the NodeB configuration file, open the U2000, click CME->Backup Managemen
Method 2: To export the NodeB configuration file on the U2000, perform the following steps: Start the U2000, cli
<<--Back
ation, find the problems in the configuration, and optimize the solution.
Obtaining Method
k CME->Backup Management->NE Backup, and perform the following steps to export the configuration file of the selected Nod
ng steps: Start the U2000, click Maintenance->Backup Management->NE Backup, and perform the following steps to export the
ation file of the selected NodeB:
Collection Purpose
Based on the NodeB U2000 traffic statistics, the tool can be used to analyze root causes related to throughput and output rel
Data Requirements
1) Latest NodeB configuration data
2. All the NodeBs under the RNC to be evaluated are included.
Obtaining Method
Alarm
Collection Purpose
The alarm data of the BSC\RNC helps the analysis engineers analyze the faults of the core network, transmission equipment,
equipment factors that affect the KPIs.
Data Requirements
The collection time range includes the time range of traffic statistics.
To obtain the data, perform the following steps: COL LOG: LOGTYPE=HISTORY_FAULT-1;
COL LOG: LOGTYPE=HISTORY_ALARM-1, ST=2019&01&01&00&00&00, ET=2019&01&10&12&51
To obtain operation logs and alarm logs at the same time, run the following command: COL LOG: LOGTY
Operation platform Command Data storage directory
BSC WebLMT COL LOG /bam/version_a/ftp/COLLOGINFO/ALM-LOG
RNC WebLMT COL LOG /bam/version_a/ftp/COLLOGINFO/ALM-LOG
BSC WebLMT - Use the Web LMT to query the file and export the file to a .csv file.
BSC WebLMT - Use the Web LMT to query the file and export the file to a .csv file.
k, transmission equipment, BSS equipment, and antenna system, and determine the
_FAULT-1;
ET=2019&01&10&12&51&57;
d: COL LOG: LOGTYPE=HISTORY_ALARM-1&OPT_LOG-1;
Requirements Other Description
Operation log
Collection Purpose
Operation logs of the BSC\RNC. Based on the association of operation logs, analysis engineers can determine the impact of o
logs.
Data Requirements
The collection time range includes the time range of traffic statistics.
To obtain the data, perform the following steps: COL LOG: LOGTYPE=OPT_LOG-1;
To obtain operation logs and alarm logs at the same time, run the following command: COL LOG: LOGTY
COL LOG: LOGTYPE=OPT_LOG-1, ST=2019&01&
COL LOG: LOGTYPE=HISTORY_ALARM-1&OP
Operation platform Command Data storage directory
RNC WebLMT COL LOG /bam/version_a/ftp/COLLOGINFO/OPT-LOG
BSC WebLMT COL LOG /bam/version_a/ftp/COLLOGINFO/OPT-LOG
BSC WebLMT - Use the Web LMT to query the file and export the file to a .csv file.
BSC WebLMT - Use the Web LMT to query the file and export the file to a .csv file.
<<--Back