Professional Documents
Culture Documents
Weekly Review For August Month 2 To 13: Presenting by
Weekly Review For August Month 2 To 13: Presenting by
05/08/2021 ● Went to SP road to buy some of the components required for Completed
experiment and did experiment that is using analog input of ●
ESP32 to read potentiometer DC voltage.
11/08/2021
12/08/2021 ● Helped in dispatching of the device and assisted Basavaraj sir to Completed
bring the syringe pump from hebbal. ●
13/08/2021 ● Went to bbmp hospital for testing and configuration of the Completed
device. ●
Weekly update
Date Worked on Status Reason for
pending
16/08/2021 Did experiment on how to send the message between two devices Completed
and through Bluetooth and WIFI using esp32.
17/08/2021 ●
19/08/2021an Worked on the task given by balu sir that is generating sine wave in Completed
d 20/08/2021 matlab and to measure the wavelength and frequency of the ●
generated signal.
●
26/08/2021 ● Had a discussion with balu sir about the implementation of project. Completed
Explored basics of Java programming.
●
27/08/2021 Attended the meeting of the graphene project. Read a research paper onCompleted
Monitoring respiratory pattern in adult and infant using pulse radar sensor. ●
●
(Observations: Irregular breathing with fast and slow phases also very short
apnea events happen very frequently in babies under six months ).
28/08/2021 Worked on the task given by balu sir that is configuring the GPIO pins and
and connecting the output of that pin to analog pin from which need to plot ●
30/08/2021 square wave. Explored string methods in Java.
31/08/2021 Read a research paper on Using ECG Surface Electrodes in Measurement of Completed
Respiration Rate for Preterm Infants(Observations: Frequency band lies in the ●
range of 0.4-2.0Hz and artifacts from 0-0.4Hz and amplification of 1000 was
done).
Date
Estimation
Will work on
for this week
Estimation Status
02/09/2021
03/09/2021 ●
Read research paper and the observations were frequency band lies in theCompleted
range of 0.4-2.0Hz,artifacts from 0-0.4Hz and amplification of at least 1000
was needed.
●
04/09/2021 Configuring the GPIO pins and connecting the output of that pin to analog pin Completed
and from which need to get square a wave. ●
06/09/2021 Studied signal processing that is band pass filtering, voltage divider circuit
which will be needed for the implementation of project Completed
Studied java programming. ●
13.09.2021 and ● Designed the band pass circuit and calculated the Completed
14.09.2021 resistor value.If we take capacitor value as 1µF and ●