Professional Documents
Culture Documents
JORDAHL® EXPERT Punching Shear - Design 1. Input Information
JORDAHL® EXPERT Punching Shear - Design 1. Input Information
JORDAHL® EXPERT Punching Shear - Design 1. Input Information
Construction member:
Position:
Date: August 13, 2021
Reinforcement diameter ϕx / ϕy = #5 / #4
Distances sx / sy = 12 in / 12 in
JORDAHL H-BAU AG Wasterkingerweg 2, CH-8193 Eglisau JORDAHL® EXPERT Punching shear Page 1 from 4
www.jordahl-hbau.ch Version: 4.2.2.39
Responsible: Construction project:
Construction member:
Position:
Date: August 13, 2021
2.1.4 Stresses
Maximum shear stresss vu = 410.5 psi
x/y = 21.5 in / -18 in
Shear resistance (concrete only) ϕvc = 216.2 psi
Shear resistance (with studrails) ϕvn = 649.2 psi
Shear resistance (upper limit) ϕvn,max = 464.8 psi
3. Elements
Number of studrails per column = 12
Number of studs per studrail = 24
Stud diameter D = 0.75 in
Stud spacing S / S0 = 3.5 in / 3.5 in
Overall height of studrail OAH = 7.15 in
Overall length of studrail OAL = 87.5 in
JORDAHL H-BAU AG Wasterkingerweg 2, CH-8193 Eglisau JORDAHL® EXPERT Punching shear Page 2 from 4
www.jordahl-hbau.ch Version: 4.2.2.39
Responsible: Construction project:
Construction member:
Position:
Date: August 13, 2021
4. Note
• The design against punching shear failure is based on the rules of ACI 318-14.
• This calculation is bases on product specific properties of DECON® Studrails®. Changes, even to similar
products, are only possible with new calculations.
• All data have to be checked with the given edge boundaries and the feasibility. DECON assumes no
liability for the input data of the user.
JORDAHL H-BAU AG Wasterkingerweg 2, CH-8193 Eglisau JORDAHL® EXPERT Punching shear Page 3 from 4
www.jordahl-hbau.ch Version: 4.2.2.39
Responsible: Construction project:
Construction member:
Position:
Date: August 13, 2021
JORDAHL H-BAU AG Wasterkingerweg 2, CH-8193 Eglisau JORDAHL® EXPERT Punching shear Page 4 from 4
www.jordahl-hbau.ch Version: 4.2.2.39