Professional Documents
Culture Documents
Brocade Commands
Brocade Commands
Brocade Commands
cfgsave To have the effective configuration to be written into the flash memory
Show Commands
nsshow -r Displays the information in the name server along with the state change
registration details
nscamshow Displays detailed information of all the devices connected to all the switches in
the fabric (Remote Name Servers)
nsallshow Displays the 24 bit address of all devices that are in the fabric
licenseshow Displays all the licenses that have been added in the switch
bannershow Displays the banner that will appear when logging in using the CLI or web tools
httpcfgshow Displays the JAVA version the switch expects at the management console
userconfig –show -a Displays the account information like role , description , password exp date ,
locked status
switchstatuspolicyshow Displays policy set for the switch regarding Marginal(Yellow) or Down(Red)
error status
portcfgshow Displays the speed set for all ports on all slots and other detailed port
information
configshow fabric.ops Displays the parameters of the switch. Ensure all switches in a fabric have the
same parameters in order to communicate
configshowfabric.ops.pidForm Displays the PID set for a switch Core , Native or Extended edge
at
hashow Displays the status of local and remote CP’s. High availability , heartbeat and
synchronization
Port Settings
portcfg rscnsupr [slot/port] A registered state change registration is suppressed when a state change occurs
–enable on the port
portcfg rscnsupr [slot/port] A registered state change registration is sent when a state change occurs on the
–disable port
portcfgpersistentdisable To disable a port , status would not change even after rebooting the switch
portcfgpersistentenable To enable a port , status would not change even after rebooting the switch
portcfgspeed , To set speed for a port#te – 0:auto negotiated 1,2,4 Gbit/sec , 1 : 1Gbit/sec , 2 :
2 Gbit/sec , 4 : 4Gbit/sec
switchcfgspeed To set speed for all the ports on the switch Note – 0:auto negotiated 1,2,4
Gbit/sec , 1 : 1Gbit/sec , 2 : 2 Gbit/sec , 4 : 4Gbit/sec
portcfgshow Displays the speed set for all ports on all slots and other detailed port information
portcfglongdistance To set the long distance mode . Default is L0(Normal), as per distance will display
LE <=10 kms , L0.5 <=25kms , L1 <=50 kms, L2<=100kms , LD=auto , LS =
Static
tsclockserver LOCL Instruction to stop NTP server synchronization (Local time of the switch)
date mmddhhmmyy To set the time of the switch when the NTP server synchronization is
cancelled
License Commands
licenseshow Displays all the licenses that are added in the switch
Banner Commands
bannershow Displays the banner that will appear when logging in using the CLI or web
tools
bannerset To set the banner which will appear when logging in using the CLI or web
tools
Password commands
passwdcfg –set -warning 23 To set a warning for the expiration Days remaining
passwdcfg –setdefault To restore the password policy to Factory settings (min length – 8, history
-1 , lockoutduration – 30)
SNMP Commands
User Configuration
userconfig –show -a / Displays all the account information like role , description , password expiration
userconfig –show date , locked status
userconfig –show john Displays all the information for the account john
userconfig –change -e no To Disable an account , usually default a/cs like admin and user . But ensure
before disabling the admin a/c there is another a/c with admin rights
Firmware commands
configupload Saves the switch config as an ASCII text file to an FTP server
configdownload To restore a switch configuration from ASCII text file Note – Need to disable the
switch before downloading the config file
configure => cfgload Fabric OS v 4.4 & above provides Secure File Copy Protocol (SCP) during upload
attributes : [y] => Ensure or download of configurations
secure config upload /
download : [y]
fastboot Needs to be run after installing the firmware. This does not include the post.
reboot Needs to be run after installing the firmware. This includes the post.
Miscellaneous commands
bannerset To set the banner which will appear when logging in using the CLI or web tools
timeout Displays the timeout time set for Telnet session on the switch
switchcfgspeed To set speed for all the ports on the switch Note – 0:auto negotiated 1,2,4
Gbit/sec , 1 : 1Gbit/sec , 2 : 2 Gbit/sec , 4 : 4Gbit/sec
switchstatuspolicyshow Displays policy set for the switch regarding Marginal(Yellow) or Down(Red) error
status
switchstatuspolicyset To change the policy set for the switch regarding Marginal(Yellow) or Down(Red)
error status