Professional Documents
Culture Documents
Series PD-33 X: Piezoresistive Differential Pressure Transmitters With Excellent Accuracy
Series PD-33 X: Piezoresistive Differential Pressure Transmitters With Excellent Accuracy
Series PD-33 X: Piezoresistive Differential Pressure Transmitters With Excellent Accuracy
Features
Technology
Typical applications
• Filter monitoring
• Flow rate measurement
• Leakage measurement
• Laboratory use
• Industrial applications
Accuracy
± 0,05 %FS
Total error band
± 0,1 %FS @ -10…80 °C
Pressure ranges
0…0,3 to 0…30 bar
Series PD-33 X
120
59
KELLER AG für Druckmesstechnik KELLER Ges. für Druckmesstechnik mbH Edition 07/2021
CH-8404 Winterthur DE-79798 Jestetten Subject to alterations
+41 52 235 25 25 +49 7745 9214 0 Companies approved to ISO 9001
info@keller-druck.com eurocenter@keller-druck.com www.keller-druck.com
Series PD-33X – specifications
Standard pressure ranges
Differential pressure
Positive proof pressure Negative proof pressure
PD
Reference pressure at
based on reference pressure
ambient pressure
Note:
all intermediate ranges for the analog interface possible from the standard ranges by scaling (turn-down) at no extra charge. Smallest range: 0,1 bar
Also negative and further +/- ranges possible. Optional: adjustment directly at intermediate ranges
Performance
Pressure
Digital nonlinearity ≤ ± 0,02 %FS Best fitted straight line (BFSL)
Total Error Band (10…40 °C) ≤ ± 0,05 %FS Max. deviation within the compensated pressure and temperature range
≤ 200 bar
Line pressure either, see Dimensions & options
≤ 600 bar
< 0,005 %FS/bar For pressure ranges ≥ 3 bar
Line pressure dependency
< 0,15 mbar/bar For pressure ranges < 3 bar
Temperature
Accuracy ≤ ± 2 °C
The temperature is measured on the pressure sensor (silicon chip) that
Resolution ≤ 0,01 °C sits behind the metallic separating diaphragm
The data apply within the compensated temperature range
Internal measurement rate > 10 Hz
KELLER AG für Druckmesstechnik KELLER Ges. für Druckmesstechnik mbH Edition 07/2021
CH-8404 Winterthur DE-79798 Jestetten Subject to alterations
+41 52 235 25 25 +49 7745 9214 0 Companies approved to ISO 9001
info@keller-druck.com eurocenter@keller-druck.com www.keller-druck.com
Series PD-33X – specifications
Electrical data
Disturbance of the 4…20 mA signal occurs during communication through the digital interface
Note
3-wire types are suitable for simultaneous operation of the analog and digital interface
Analog interface
< (U - 8 V) / 25 mA 2-wire
Load resistance
> 5 kΩ 3-wire
2-wire
≥ 300 Hz
Limiting frequency 3-wire (0,1…2,5 V)
≥ 1000 Hz 3-wire (0…10 V, 0…5 V)
Note Filter properties can be adjusted by the customer
Digital interface
Type RS485 Half-duplex
Modbus RTU
Communication protocols
KELLER bus protocol Proprietary
Identification Class.Group: 5.24
Unit of pressure bar Standard settings:
bus address 1,
Unit of temperature °C baud rate 9600 bit/s
Data type Float32 and Int32
Other default settings available on request
Baud rates 9600 and 115ʼ200 bit/s Can be reconfigured via software by the customer later
Lines up to 1,2 km
Electrical connection
Binder series 723 DIN EN 61076-2-106, 5-pin
M12 DIN EN 61076-2-101, A-coded, 5-pin
Plug
Souriau Series 8525 MIL-STD-1669
GSP (without RS485) EN 175301-803-A (DIN 43650)
Cable ø 5,8 mm, PE sheath 5-wire, cable gland
Electromagnetic compatibility
CE conformity as per 2014/30/EU (EMC) EN 61326-1/EN 61326-2-3/EN 61000-6-1/EN 61000-6-2/EN 61000-6-3/EN 61000-6-4
KELLER AG für Druckmesstechnik KELLER Ges. für Druckmesstechnik mbH Edition 07/2021
CH-8404 Winterthur DE-79798 Jestetten Subject to alterations
+41 52 235 25 25 +49 7745 9214 0 Companies approved to ISO 9001
info@keller-druck.com eurocenter@keller-druck.com www.keller-druck.com
Series PD-33X – specifications
Mechanical data
Materials in contact with media
Pressure connection Stainless steel AISI 316L
Pressure transducer separating diaphragm Stainless steel AISI 316L
Pressure transducer seal (internal) FKM others on request
Pressure connection seal (external) none
Other materials
Pressure transducer oil filling Silicone oil others on request
Further details
G1/4 female
Pressure connection
1/4-18NPT female See Dimensions and options
Width × height 59 mm × approx. 120 mm
approx. 500 g Line pressure 200 bar
Weight
approx. 650 g Line pressure 600 bar
Ambient conditions
Notes Degrees of protection are valid with the corresponding mating plug
Vibration resistance 10 g, 10…2000 Hz, ± 10 mm IEC 60068-2-6
Shock resistance 50 g, 11 ms IEC 60068-2-27
Pressure endurance @ RT (20…25 °C) > 10 million pressure cycles 0…100 %FS
KELLER AG für Druckmesstechnik KELLER Ges. für Druckmesstechnik mbH Edition 07/2021
CH-8404 Winterthur DE-79798 Jestetten Subject to alterations
+41 52 235 25 25 +49 7745 9214 0 Companies approved to ISO 9001
info@keller-druck.com eurocenter@keller-druck.com www.keller-druck.com
n22
78
n22
Series PD-33X – Dimensions and options
Electrical connections
76 78
83
n22
n22
4 3
n22
2
5
1
78
Binder series 723 2-wire 3-wire M12 2-wire 3-wire
n22
n22
1 OUT/GND 1 GND 1 76
OUT/GND 1 GND
3 4
n22
4 2 n.c. 2 +OUT 2 n.c. 2 +OUT
2 1 2 1
3 +Vs 3 +Vs 3 +Vs 3 +Vs
5 3
1
4
78RS485A 3 4 RS485A 2 4 RS485A 4 RS485A
5 RS485B 5 RS485B 5 RS485B 5 RS485B
n22
83 78
n22
n22
4 3
2
5
4 1
1 2 1
3
3 2
78
Cable gland 2-wire 3-wire GSP EN 175301-803-A 2-wire 3-wire
78
n22
83 OUT/GND
WH WH GND 1 OUT/GND 1 GND
n22
78
n22
4
Souriau Series 8525 2-wire 3-wire
3
2 1 4…20 mA 0…max. 10 V
1 3 C OUT/GND C GND
2 B n.c. B +OUT
A +Vs A +Vs
D RS485A D RS485A
F RS485B F RS485B
Shield on CASE Shield on CASE
4
2 1
KELLER AG für Druckmesstechnik KELLER Ges. für Druckmesstechnik mbH Edition 07/2021
CH-8404 Winterthur 3 DE-79798 Jestetten Subject to alterations
3 +41 52 235 25 25 2 +49 7745 9214 0 Companies approved to ISO 9001
info@keller-druck.com eurocenter@keller-druck.com www.keller-druck.com
Series PD-33X – Dimensions and options
Available pressure connections
For line pressure 200 bar
G1/4 female 1/4-18NPT female
n25,05
n25,05 n25,05
4 n25,05
4
4
4
24
20 1/4-18NPT
1/4-18NPT
24
G1/4 24
1/4-18NPT
1/4-18NPT
24
G1/4
G1/4
n30
n30
G1/4
n30
n30
n30
n30
n30
n30
20
20
20
13 13 13 13
13 13
58,7 58,7 13 13
58,7 58,7
1/4-18NPT
5
5
1/4-18NPT
G1/4
G1/4
o40
40
G1/4
G1/4
o40
40
o
59 59 59
KELLER AG für Druckmesstechnik KELLER Ges. für Druckmesstechnik mbH Edition 07/2021
CH-8404 Winterthur DE-79798 Jestetten Subject to alterations
+41 52 235 25 25 +49 7745 9214 0 Companies approved to ISO 9001
info@keller-druck.com eurocenter@keller-druck.com www.keller-druck.com
Series PD-33X – Software, scope of delivery and accessories
Modbus interface Interface converters "CCS30" software
The X-line products have a digital interface (RS485 The connection to a computer is established via an The licence-free CCS30 software is used to carry
half-duplex), which supports the MODBUS RTU and RS485-USB interface converter To ensure smooth out configurations and record measured values.
KELLER bus protocols. Details of the communica- operation, we recommend the K-114 with the corre-
tion protocols can be found at www.keller-druck. sponding mating plug, robust driver module, fast RX/ Measurement collection
com. Documentation, a Dynamic Link Library (DLL) TX switching and connectable bias and terminating • Live visualisation
and various programming examples are available resistors. • Adjustable measuring and storage interval
for integrating the communication protocol into your • Export function
own software. • Parallel recording in bus operation
• Up to 100 measured values per second
Configuration
• Call up of information (pressure and temperature
range, software version, serial number etc.)
• Readjustment of zero point and amplification
• Rescaling of analog output (unit, pressure range)
• Adjustment of low-pass filter
• Selection of instrument address and baud rate
Scope of delivery
KELLER test report Mating plug to Binder 723 Female connector to DIN43650
Remark
Bemerkung / Remarque
0.000 bar 2.000 bar 4.000 bar 0 bar 2 bar 4 bar 6 bar 8 bar 10 bar
6.000 bar 8.000 bar 10.000 bar
0.2 20
0.1
0.15 15
8
0.1 10
0.05
[%FS(0...10 bar )]
4
[%0...10 Volt]
0.05 5
mV
0 0
mbar
0 0
-0.05 -5
-4 -0.1 -10
-0.05
-0.15 -15
-8
-0.1 -0.2 -20
-10 0 10 20 30 40 50 60 70 80 -10 0 10 20 30 40 50 60 70 80
Temp. [°C] Temp. [°C]
Test passed OK OK
Test i.O. / test réussi
Accuracy (TEB) -0.024 ... 0.006 %FS -0.021 ... 0.002 %FS @ -10 ... 80 °C
Totales Fehlerband / Erreur total
Accessories
KELLER AG für Druckmesstechnik KELLER Ges. für Druckmesstechnik mbH Edition 07/2021
CH-8404 Winterthur DE-79798 Jestetten Subject to alterations
+41 52 235 25 25 +49 7745 9214 0 Companies approved to ISO 9001
info@keller-druck.com eurocenter@keller-druck.com www.keller-druck.com