The document discusses bevel preparation and joint design for welding. It involves removing oxides from plasma or flame cut edges using grinding. Joint designs can be single, single-V, or fillet welds. Root and bridge tack welds are used, and root gaps and faces are specified as 0-5mm for complete joint penetration welds and 0-2mm for partial joint penetration and fillet welds. Bevel angles are given as 55-75 degrees for complete joint penetration welds.
The document discusses bevel preparation and joint design for welding. It involves removing oxides from plasma or flame cut edges using grinding. Joint designs can be single, single-V, or fillet welds. Root and bridge tack welds are used, and root gaps and faces are specified as 0-5mm for complete joint penetration welds and 0-2mm for partial joint penetration and fillet welds. Bevel angles are given as 55-75 degrees for complete joint penetration welds.
The document discusses bevel preparation and joint design for welding. It involves removing oxides from plasma or flame cut edges using grinding. Joint designs can be single, single-V, or fillet welds. Root and bridge tack welds are used, and root gaps and faces are specified as 0-5mm for complete joint penetration welds and 0-2mm for partial joint penetration and fillet welds. Bevel angles are given as 55-75 degrees for complete joint penetration welds.