Professional Documents
Culture Documents
Dual Working Pantographs
Dual Working Pantographs
Dual Working Pantographs
__________________________
1. In this WCAM-2P loco, both the rear as well as the front pantos have been
animated.
2. Dual working pantos is a feature which works with Msts Bin previously installed
wherein you have a choice of using either of the pantos.
3. On starting play, you will have to raise the panto. Raising/lowering the rear
panto can to be done in a usual manner by pressing 'P'.
4. To raise the front panto, you need to press 'Shift+P'. Press 'Shift+P' again to
lower it.
5. If you switch pantos after stopping or while running a loco/train, then you will
have to press 'Z' to start the loco/train or resume acceleration.
Enjoy!
Gaurav Virdi