Professional Documents
Culture Documents
Product Environmental Profile: FBM214/216 Termination Assembly Termination Assemblies
Product Environmental Profile: FBM214/216 Termination Assembly Termination Assemblies
Product Environmental Profile: FBM214/216 Termination Assembly Termination Assemblies
Termination Assemblies
Termination assembly is passive extender, used to extend signals from the field to I/O module by
Functional unit performing signal conduction during 20 years of life time with 0 W power consumption and 100%
use rate.
Constituent materials
Reference product mass 345 g including the product, its packaging and additional elements and accessories
PA Polyamide - 20.9%
Electronic components -
24.5%
Plastics 43.0%
Metals 7.8%
Others 49.1%
Substance assessment
This product contains: Lead >0.1%. These percentages are relative to the total mass of the product.
Details of ROHS and REACH substances information are available on the Schneider-Electric Green Premium website
http://www2.schneider-electric.com/sites/corporate/en/products-services/green-premium/green-premium.page
Installation FBM216 Termination Assembly does not require any installation operations.
Use The product does not require special maintenance operations.
End of life optimized to decrease the amount of waste and allow recovery of the product components and materials
This product contains Electronic boards (84.5 g) that should be separated from the stream of waste so as to optimize
end-of-life treatment.
End of life The location of these components and other recommendations are given in the End of Life Instruction document which
is available on the Schneider-Electric Green Premium website
http://www2.schneider-electric.com/sites/corporate/en/products-services/green-premium/green-premium.page
Based on “ECO’DEEE recyclability and recoverability calculation method”
Recyclability potential: 15% (version V1, 20 Sep. 2008 presented to the French Agency for Environment
and Energy Management: ADEME).
Environmental impacts
Reference life time 20 years
Product category Other equipments - Passive product - continuous operation
Installation elements No special components needed
Use scenario The product is in use 100% of the time with a power consumption of 0W for 20 years
Geographical
USA
representativeness
Technological
Termination assembly is used by I/O module's to transfer signals to or from the field.
representativeness
Manufacturing Installation Use End of life
Energy model used Electricity mix; AC; Electricity mix; AC; Electricity mix; AC;
Energy model used: Mexico consumption mix, at consumption mix, at consumption mix, at
consumer; 120V; US consumer; 120V; US consumer; 120V; US
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
Contribution to Contribution to Contribution to Contribution to Contribution to Contribution to Net use of Total Primary
mineral the soil and water water global warming ozone layer photochemical freshwater Energy
resources acidification eutrophication depletion oxidation
depletion
Total use of non-renewable primary energy resources MJ 6.54E+01 6.43E+01 6.29E-01 7.33E-02 0* 4.90E-01
USA
# Internal