[Calibration certincate
iostument MicroOhm 100 A Senet Seances
ate 26.06.2010
Twe MI 3252
Performed by: Man Mena
‘Date Paced in Service: Due Date:
Dette! Recommended Cal nial 2 months
"The sue date may be eetabishod (oy tne customer) by adding the "Recommended Cal ner to
so "Date Slaed in Seven”
No [__Finction [Reference | ow lonin | Reading | Uoertainy [High Tit
1 Oaook, keys, BAT indiction pass
S252, USB communication PASS
42 Chargerat 230 V (115 V, power supply curent PASS
1.3, Tes cure a ll ranges at max resistance pase
90% to 120% nominal value
2 Resistance, 4 wire
Range Test curent
2H 1A 9.9910 025% —9,9928 008% 10.25%
20 OA 4000702 — 0.25% 1,00106 0.08% 40.25%
20 1A 1,000700 1,00091 0.08% — +0,25%
20m2 1A 102,970 ma 102,980 0.08% 10.25%
20m2 —10A 102,970 ma 102,980 0,08% “0.25
20m2 10 11,2400m2 11,2129 008% 0.25%
20m2 WA — 11,2100m0 11,218 008% — +0.25%4
20m DA —11,2400m0 11,2186 008% 0.25%
m2 SOA 11,2100ma 11,2185 0.08%
2m2 SOA —1,07930ma 407877 0.09%
2m2 100A — 4,07990m0 107881 0,09%
mown 100A to4zsoyn fosras ox
moun 100A ‘M080 un 1088 oN"
coe ok Gain tate
18 METREL Ste ame,
Si 1354 HORUL Mpliwmel
stanenatan Reson Een acues SLOVENIA ‘nat moistMetrel Certificate of
Calibration Practices
The Metre! Quality System is certified by BVA according to
Quality standard ISO 9001:2015, Certificate No. SL22466Q.
The Metrel hereby certies that the above instrument was
calibrated in accordance with applicable Metre! calibration
procedures during the manufacturing process. These processes
are ISO 9001 controlled and are designed to assure that the
instrument will meet its published specification.
‘The Metre! further certifies that the measurement standards and
instruments used during the calibration of this instrument are
traceable to the (inter)national standards.
‘The policies and procedures at this facility comply with,
EN ISO/IEC 17025.
Environmental conditions: Temperature: 23°C + 8 °C
Relative humidity: 10 % to 75 %
Calibration Procedure: “Name of Model Type"
Uncertainty: The reported expanded uncertainty of measurement is stated as
the standard uncertainty of measurement multiplied by coverage
factor k= 2, which for a nominal distribution corresponds to a
coverage probabilly of approximately 95%. The standard
uncertainty of measurement has been determined in accordance
with EA Publication EA-4/02,
(role fare
Edvard Reven Janko Mole
(Chief Executive Officer Head of Calibration Laboratory