PE34 has a durable, moisture resistant The following data are nominal values based on PSTC, LDPE (polyethylene) backing with a ASTM and other standard tests. The data should not be rubber-based pressure-sensitive considered as specifications. adhesive. Bonds well to a variety of surfaces and removes cleanly. Easy to Backing Polyethylene (PE) Film unwind. Adhesive Synthetic Rubber Designed to offer a high degree of conformability without excessive stretch. Adhesion to Steel (oz/in of width) 75 (20.5 N/25mm) Stiffer backing makes it easier to handle in ASTM D3330 certain applications. UV resistance up to Tensile Strength (lbs./in of width) 21 (92 N/25mm) 30 days, depending upon conditions and ASTM D3759 surfaces. Total Thickness (mils) 7.0 (0.178mm) ASTM D3652 PRODUCT APPLICATION UV-resistant PE film tape is used to mask Elongation (% at break) 75 against overspray when applying stucco ASTM D3652 and EIFS, protecting surfaces such as Application Temperature Range +45°F to +120°F windows, doors and frames. Can be used (+7°C ~ +49°C) for seaming and sealing polysheeting and film indoors and outdoors where UV Operating Temperature Range +20°F ~ +200°F exposure is prevalent. Removes cleanly (-7°C ~ +93°C) from most opaque surfaces up to 30 days. Color Red, White SPECIFICATION CONFORMANCE Tested in accordance with UL723 / ASTM E84
100 Paramount Drive, Suite 300 | Sarasota, FL 34232 | USA
While we believe them to be reliable, the statements and information
herein are only for general guidance and are not warrants or guarantees for accuracy and completeness. The user must, by test or otherwise, determine suitability for this purpose. There is no warranty of fitness for a particular purpose. Our standard term and conditions of sale apply exclusively to all orders, and all liability for damages of any kind, including consequential, exceeding purchase price is excluded. No one is authorized by us to make oral warranties. We reserve the right to make changes without notice or obligation in our products and publications.