This maintenance task card provides troubleshooting steps for an altimeter that is not operating correctly. It lists potential causes such as a plugged static line, defective mechanism, incorrectly set hands, or leaks. The remedies include checking for obstructions, substituting a known good altimeter, resetting hands, tightening connections, and replacing the instrument if issues persist.
This maintenance task card provides troubleshooting steps for an altimeter that is not operating correctly. It lists potential causes such as a plugged static line, defective mechanism, incorrectly set hands, or leaks. The remedies include checking for obstructions, substituting a known good altimeter, resetting hands, tightening connections, and replacing the instrument if issues persist.
This maintenance task card provides troubleshooting steps for an altimeter that is not operating correctly. It lists potential causes such as a plugged static line, defective mechanism, incorrectly set hands, or leaks. The remedies include checking for obstructions, substituting a known good altimeter, resetting hands, tightening connections, and replacing the instrument if issues persist.
Reference: MTC NO: PAGE Service Manual (CESSNA 172 & Skyhawk Series 1969 thru 1976) 172MTC-34-003 R0 1 of 1 Section 15 (Page 15-8) Signature: 1.TOOLS: - Clamp - Hose - Known-good Altimeter 2.CONSUMABLES & EXPENDABLES: - Clamp 3.PROCEDURE: TROUBLE PROBABLE REMEDY CAUSE INSTRUMENT FAILS TO Static line Check line for obstructions. Blow out OPERATE. plugged. lines. _________ Defective Substitute known-good altimeter and mechanism. check reading. Replace instrument. _________ INCORRECT INDICATION. Hands not Reset hands with knob. carefully set. _________ Leaking Substitute known- good altimeter and diaphragm. check reading. Replace instrument. _________ Pointers out of Compare reading with known- good calibration. altimeter. Replace instrument. _________ HAND OSCILLATES. Static pressure Check lines for obstruction or leaks. irregular. Blow out lines, tighten connections. _________ Leak in airspeed Check other instruments and system or vertical speed plumbing for leaks. Blow out lines, indicator tighten connections. _________ installations.
MAINTENANCE RELEASE Aircraft Registry:
_____________________ _________________________________________ Date: AML Seq No. Signature above Printed Name of Mechanic _____________________