Professional Documents
Culture Documents
RMesh Brochure - March 2021
RMesh Brochure - March 2021
RMESH
25th Floor Ore Central Building, 9th Avenue corner 31st Street, Bonifacio Global City, Taguig, Philippines • Trunkline (02) 8856 6888 • www.steelasia.com
RMesh is widely used as a substitute for commercial bars in walls and slabs,
foundations, and footings. It reduces the placement work of large amount of
manual tying and provides more reliable bonding between the steel bars.
ADVANTAGES
h (WRM) is a factory pre-fabricated reinforcement steel WRM delivers the following advantages to the c
hat are fused with resistance welding technology. This
educe the original tensile strength of the steel and the ➢ REDUCED TIME FOR PLACEMENT of the rein
W
0% of the force needed to break the weld. weather/condition for progress
TRANSVERSE on site
CROSS BAR
➢ REDUCED DEPEDENCY OF FIELD LABOUR for
LONGITUDINAL /
➢ LESS
LINE SITE
BAR SPACE NEEDED for on-site steel fa
➢ BONDING BETWEEN BARS IS MUCH RELIALB
assembled rebars – this reduces the risks of
SIDE OVERHANGS
stitute for commercial bars in walls & slabs, may vary as required
➢ LESS CRACKING ON CONCRETE as theL smalle
educes the placement work of large amount of and do not need to be S
➢ LESS equal.
WASTAGE OF REINFORCING STEEL sinc
e reliable bonding between the steel bars.
size for exact placement (ENGINEERING MES
LESS QUALITY ISSUE OF BENDING & FABRIC
➢ OVERHANGS
END
undergo
should equal one-halfproper quality check and control
of a transverse space,
unless otherwise
specified by the
Architect/Engineer.
SIZES & STEEL GRADES
RMESH SPECIFICATIONS
CROSS & LINE
SPACING
WIRE DIAMETER
(mm)
(mm)