Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

OFM-500 BIO-REMEDIAL LIQUID TREATMENT

For
PRODUCT
INFORMATION
BULLETIN

EnviroLogic
OIL FIELD MAINTENANCE BIO-
BIO-BASED TECHNOLOGIES Inc.

This product was developed to meet the demanding needs of the “oil-drilling”
Product Overview industry. It has been specially formulated to treat & clean crude oil and its
by-products on hard surfaces, soils, gravel, pits, machinery & oil rigs. The highly
effective cleaners & degreasers developed for this product effectively break-down all known components of the crude oil.
Further, the bio-remedial “action” of the harmless micro-organisms, turn the harmful components into safe, environmentally
friendly substances that can be absorbed into the soil or discharged into drainage systems. This product contains no
solvents & is non-flammable. It is non-hazardous, non-corrosive & non-caustic. It is manufactured under strict quality-
control standards making it one of the safest cleaning products on the market for both you and the environment. We
recommend that OFM-500™ be used as a major part of a routine maintenance program in all phases of the drilling process.

OFM--500™ to 15 to 30 parts water depending on the intensity of the


Dilute 1 part OFM
How To Use This Product OFM--500™ makes 15 to 30 gallons of diluted
application. For example, 1 gallon of OFM
product that is ready for use. A water temperature between 80° F. & 90° F. is the
optimum temperature for use with this product but, it will perform very well in any water temperature between 40° F. &
120° F.. Apply this product using a pressure or industrial pump sprayer or manually from a drum or pail. When spraying use
OFM--500™ on the
sufficient pressure to break the surface tension. If pressure is not used, manually agitate & aerate OFM
surface being treated. In other words, use a stiff broom or brush on rocks, soil, gravel, grass & trees if it is inconvienient to
use a sprayer. Remember that you must mix this product, as described above, in order for both the cleaning effect & the bio
-remedial process to take place.
Do not exceed a water temperature of 125°F.

OFM--500™ can be used in all phases of oil field production operations, the following
While OFM
Where To Use This Product is a partial list of the many uses of this product.
Please contact SpillAway Brands,
Brands, if you have any questions about its usage:

• Production Fluid Overflows • Workover Surface Spills • Flowline Breaks • General House-
House-Keeping
• Tank Battery Buildup • Pit Overflows • Land Sites • Vehicle Parking Area
• Surface Pit Closures • Pigging Discharges • Farming Sites • Pumping Stations
• Hydraulic Line Breaks • Pipeline Breaks • Wellhead Area • Pumping Unit Gear End Leaks
• Lubrication Leaks • Equipment Failures • Stuffing Box Leaks • Pumping Unit Oil Change Spills
• Compressor Stations • Machine Shops • Maintenance Areas • Vehicle Maintenance Areas

OFM--500™ is an active mixture of hydrocarbon-oxidizing, naturally occurring, single-celled


OFM
Technical Information micro-organisms with a “bio-surface cleaning agent” and water.
It is specially formulated to be safe, environmentally enhancing and effective.

PHYSICAL PROPERTIES: PRODUCT EFFECTIVENESS: The effectiveness of this product and the “speed” at which it works is
Appearance: Brown Liquid determined by certain factors. In general these factors are as follows:
Odor: Orange Citrus TEMPERATURE: The warmer the temperature, the faster this product will work. (see above)
Boiling Point: 212° F. AGE OF THE STAIN OR SPILL: The older the stain or spill, the longer it takes to work.
Soluble in Water: Complete AERATION & PRESSURE: The use of an industrial sprayer or pressure washer speeds the process.
pH Concentrate” 6.9 to 7.2 TYPE OF HYDROCARBON: Some hydrocarbons take longer than others.
pH Diluted: 6.9 to 7.5 It has been our experience that the “cleaning” action of this product begins Immediately. The bio-
bio-remedial
Evaporation Rate: Same as Water process can begin almost immediately but may take longer depending on the above factors.

Packaging Information ASK US ABOUT

5 GALLON “CUBITAINERS”
2-1/2 GALLON “F STYLE JUGS” (2 per Case)
1 GALLON “F-
“F-STYLE JUGS” (4 per Case)
55 GALLON DRUMS
BULK PACKAGING AVAILABLE

EnviroLogic
BIO-
BIO-BASED TECHNOLOGIES Inc.
827 Glenside Ave., Wyncote, PA 19095 · Phone: (215) 887-4400 · Fax (215) 887-9849 · Web: www.spillaway.com · E-Mail: inquiry@spillaway.com

You might also like