The document provides a checklist for van and LGV driver walkaround checks. It lists checks that should be performed in the cab, on mirrors and windows, lights, indicators and reflectors, wheels and tires, and load security. The checklist ensures drivers inspect over 30 items related to the vehicle's operation, safety features, and secure loading of cargo. It aims to promote complete pre-trip inspections of commercial vehicles.
The document provides a checklist for van and LGV driver walkaround checks. It lists checks that should be performed in the cab, on mirrors and windows, lights, indicators and reflectors, wheels and tires, and load security. The checklist ensures drivers inspect over 30 items related to the vehicle's operation, safety features, and secure loading of cargo. It aims to promote complete pre-trip inspections of commercial vehicles.
The document provides a checklist for van and LGV driver walkaround checks. It lists checks that should be performed in the cab, on mirrors and windows, lights, indicators and reflectors, wheels and tires, and load security. The checklist ensures drivers inspect over 30 items related to the vehicle's operation, safety features, and secure loading of cargo. It aims to promote complete pre-trip inspections of commercial vehicles.
In Cab Checks Mirrors & Windows Access • Check driving controls, seat position & safety belt • Mirrors secure & aligned correctly • Steps undamaged • General housekeeping & cleanliness of cab • Clean & in good condition • Good unworn surface • Remove any obstructions or loose material • View not obstructed e.g. by stickers, etc. • Clean especially in the foot well • Valid Insurance & Tax discs displayed • Doors working properly • Turn on engine & check all instrument gauges & warning lights working • Tachograph: Calibrated, correct hours & speed limiter plaque displayed (where applicable) • Wipers, washers, horn, demister & temperature controls working correctly • Steering & brakes working correctly Lights, Indicators & • Ensure safety belts accessible & working Reflectors • Hi-Viz jacket/vest accessible in cab • All in place • Undamaged • Working External Checks • Clean • Vehicle sitting square & not leaning • Correct colour to one side • Check underneath front of vehicle for fluid leaks • Bumpers (Front & Rear) in good condition Load Security • Exhaust: No excessive noise or smoke Wheels & Tyres • Vehicle loaded within load limits • Number plates (Front & Rear): • Tyres correctly inflated In place, visible & clean • Load distributed evenly across axles • Bulkhead in position • Tyres correct tread depth • Fuel cap seal: In place, in good condition & no leaks • Load secured properly (restraining equipment, straps, racking) • Tyres undamaged: No abrasions, bulges or tears • Check engine oil, coolant, windscreen • Restraint equipment inspected: no damage, no loose • Road wheel nuts all in place, correctly fitted & secure wash and brake fluid for levels & leaks racking bolts, etc. • Wheel nut indicators (if in use) correctly aligned