Professional Documents
Culture Documents
SOP of Cleaning of Sampling Tools
SOP of Cleaning of Sampling Tools
1.0 OBJECTIVE
2.0 SCOPE
3.0 RESPONSIBILITY
4.0 ACCOUNTABILITY
5.0 PROCEDURE
5.1.1 Clean the sampling devices with running tap water followed by
5.1.5 Put the clean and dried equipment in a poly-bag and keep it at appropriate place.
5.2.1 Clean the equipment with running tap water followed by TEEPOL/LABOLENE 0.5
5.2.4 Keep the washed tubes for draining on the stand meant for the same.
6.2.5 After the tubes are dried the ends are covered with poly-bags.
5.3.1 Clean the things with running tap water followed by TEEPOL/LABOLENE 0.5 %
soap solution to remove obvious adhering particles.
6.3.2 Finally rinse with purified water.
6.3.3 Check the cleanliness physically and clean again if required
6.3.4 Wrap the clean and dried equipment in a poly-bag & keep it in appropriate place.
6.4 After cleaning record to be maintained.
6.5 After cleaning sampler can be used with in 48 hours.
6.0 ABBREVIATIONS
6.1 SOP - Standard Operating Procedure
6.2 No. - Number
6.3 QA - Quality Assurance
6.4 CCF - Change control format
6.5 NA - Not applicable
6.6 QC - Quality Control