The document provides specifications for two agitators used in an effluent treatment plant. It outlines the operating conditions, performance parameters, materials, construction details, and motor specifications for the agitators. The agitators are used to mix flocculant and coagulant into rectangular tanks that are 2800mm by 2800mm by 4700mm. They will operate continuously, 24 hours per day to suspend and mix chemicals into the wastewater flow.
The document provides specifications for two agitators used in an effluent treatment plant. It outlines the operating conditions, performance parameters, materials, construction details, and motor specifications for the agitators. The agitators are used to mix flocculant and coagulant into rectangular tanks that are 2800mm by 2800mm by 4700mm. They will operate continuously, 24 hours per day to suspend and mix chemicals into the wastewater flow.
The document provides specifications for two agitators used in an effluent treatment plant. It outlines the operating conditions, performance parameters, materials, construction details, and motor specifications for the agitators. The agitators are used to mix flocculant and coagulant into rectangular tanks that are 2800mm by 2800mm by 4700mm. They will operate continuously, 24 hours per day to suspend and mix chemicals into the wastewater flow.
The document provides specifications for two agitators used in an effluent treatment plant. It outlines the operating conditions, performance parameters, materials, construction details, and motor specifications for the agitators. The agitators are used to mix flocculant and coagulant into rectangular tanks that are 2800mm by 2800mm by 4700mm. They will operate continuously, 24 hours per day to suspend and mix chemicals into the wastewater flow.
PROJECT : PENAMBAHAN UNIT FLOKULASI & BY EK KOAGULASI EFFLUENT TREATMENT CHKD AS ITEM NO. : M-7203 APVD LJ DOC NO. : DATE 1 OPERATING CONDITION PERFORMANCE 2 Fluid Handled FLOCCULANT Rotational as seen from bottom to top CCW 3 Service Temperature °C Amb. Lifting Heigh mm (2) 4 Spec. Grav. At Service Temperature 1,25 Rated Torque kN (2) 5 Viscocity at service temperature cp 1,5 Max. Torque kN (2) 6 Corrosion/Erosion Cause by Solids / Acids Driving system Electric Motor (2) 7 Agitator Speed rpm 170 (2) Duty Continous 24 h/d (2) 8 Agitator Type Propeller (2) Maximum Flow m3/hr (2) 9 Process : Chemical / Physical Suspension & mixing (2) Shaft Type Solid (2) 10 Baffles No (2) MANUFACTURE 11 Volume Working / Design m3 37 (2) Manufacture 12 Location (2) Blade Type Propeller 13 Type of Tank Rectangular (2) Blade Qty. Ea 3 14 Dimension (L x W x H) (mm x mm) 2800 x 2800 x 4700 (2) Row of Blade Ea 2 15 MATERIALS GEAR MOTOR 16 Shell (3) Brand 17 Propeller CS + RL (3) Type Vertical Gearmotor 18 Intermediate Guide Yes Ratio 1:9 (2) 19 Flange CS + RL (2) Output Speed rpm 170 (2) 20 Mounting Plate CS + RL (2) SF 1,5 (2) 21 Bolt & Nuts CS + RL (2) Lubrication (2) 22 Shaft CS + RL (2) Model (2)
23 CONTRUCTION ELECTRICAL MOTOR
24 Shaft Dia. At Propeller (Solid) mm 50 (2) Item No. M-7203 25 Shaft Dia. At Coupling (Solid) mm 60 (2) Type TEFC 26 Shaft Length from Mounting Surface mm 3000 (2) Power / Rpm (Driving) kW/rpm 2,2 / 1500 27 Impeller Diameter mm 560 (2) Power / Rpm (Lifting) kW/rpm 28 Mounting Plate Volts / Phase / Frequency V / - / Hz 380/3/50 29 Seal (2) Protection / Insulation IP55 / F / B 30 Nr & Size of Rings (2) 31 Blades 32 Driver Support Above tank (3) TEST 33 Agitator Support Above tank (3) Dimension Yes 34 Coupling (Motor Gear) (2) Running Yes 35 Fastening Flange (2) 36 Total Weight 37 NOTES 38 (1) By Vendor 39 (2) To be checked & verified by vendor 40 (3) Design support for at least 2.5 times vertical down load 41 Agitator will operating at preneutralizer filling and emptying 42 Operating vessel pressure Atm / -80 mm w.c AGITATOR DATA SHEET CLIENT : PT. PETROKIMIA GRESIK REV 0 1 2 3 PROJECT : PENAMBAHAN UNIT FLOKULASI & BY EK KOAGULASI EFFLUENT TREATMENT CHKD AS ITEM NO. : M-7202 APVD LJ DOC NO. : DATE 1 OPERATING CONDITION PERFORMANCE 2 Fluid Handled COAGULANT Rotational as seen from bottom to top CCW 3 Service Temperature °C Amb. Lifting Heigh mm (2) 4 Spec. Grav. At Service Temperature 1,25 Rated Torque kN (2) 5 Viscocity at service temperature cp 1,5 Max. Torque kN (2) 6 Corrosion/Erosion Cause by Solids / Acids Driving system Electric Motor (2) 7 Agitator Speed rpm 170 (2) Duty Continous 24 h/d (2) 8 Agitator Type Propeller (2) Maximum Flow m3/hr (2) 9 Process : Chemical / Physical Suspension & mixing (2) Shaft Type (2) 10 Baffles No (2) MANUFACTURE 11 Volume Working / Design m3 37 (2) Manufacture 12 Location (2) Blade Type Propeller 13 Type of Tank Rectangular (2) Blade Qty. Ea 3 14 Dimension (L x W x H) (mm x mm) 2800 x 2800 x 4700 (2) Row of Blade Ea 2 15 MATERIALS GEAR MOTOR 16 Shell (3) Brand 17 Propeller CS + RL (3) Type Vertical Gearmotor 18 Intermediate Guide Yes Ratio 1:9 (2) 19 Flange CS + RL (2) Output Speed rpm 170 (2) 20 Mounting Plate (2) SF 1,5 (2) 21 Bolt & Nuts (2) Lubrication (2) 22 Shaft (2) Model (2)
23 CONTRUCTION ELECTRICAL MOTOR
24 Shaft Dia. At Propeller (Solid) mm 50 (2) Item No. M-7202 25 Shaft Dia. At Coupling (Solid) mm 60 (2) Type TEFC 26 Shaft Length from Mounting Surface 3000 (2) Power / Rpm (Driving) kW/rpm 2,2 / 1500 27 Impeller Diameter mm 560 (2) Power / Rpm (Lifting) kW/rpm 28 Mounting Plate Volts / Phase / Frequency V / - / Hz 380/3/50 29 Seal (2) Protection / Insulation IP55 / F / B 30 Nr & Size of Rings (2) 31 Blades 32 Driver Support Above tank (3) TEST 33 Agitator Support Above tank (3) Dimension Yes 34 Coupling (Motor Gear) (2) Running Yes 35 Fastening Flange (2) 36 Total Weight 37 NOTES 38 (1) By Vendor 39 (2) To be checked & verified by vendor 40 (3) Design support for at least 2.5 times vertical down load 41 Agitator will operating at preneutralizer filling and emptying 42 Operating vessel pressure Atm / -80 mm w.c AGITATOR DATA SHEET CLIENT : PT. PETROKIMIA GRESIK REV 0 1 2 3 PROJECT : PENAMBAHAN UNIT FLOKULASI & BY EK KOAGULASI EFFLUENT TREATMENT CHKD AS ITEM NO. : M-7201 APVD LJ DOC NO. : DATE 1 OPERATING CONDITION PERFORMANCE 2 Fluid Handled NEUTRALIZER Rotational as seen from bottom to top CCW 3 Service Temperature °C Amb. Lifting Heigh mm (2) 4 Spec. Grav. At Service Temperature 1,25 Rated Torque kN (2) 5 Viscocity at service temperature cp 1 Max. Torque kN (2) 6 Corrosion/Erosion Cause by Solids / Acids Driving system (2) 7 Agitator Speed rpm 170 (2) Duty (2) 8 Agitator Type Propeller (2) Maximum Flow m3/hr (2) 9 Process : Chemical / Physical Suspension & mixing (2) Shaft Type Solid 10 Baffles No (2) MANUFACTURE 11 Volume Working / Design m3 37 (2) Manufacture PT. ANEKA JASA GRHADIKA 12 Location (2) Blade Type Propeller 13 Type of Tank Rectangular (2) Blade Qty. Ea 3 14 Dimension (L x W x H) (mm x mm) 2800 x 2800 x 4700 (2) Row of Blade Ea 2 15 MATERIALS GEAR MOTOR 16 Shell (3) Brand 17 Propeller CS + RL (3) Type Vertical Gearmotor 18 Intermediate Guide Yes Ratio 1:9 (2) 19 Flange CS + RL (2) Output Speed rpm 170 (2) 20 Mounting Plate (2) SF 1,5 (2) 21 Bolt & Nuts (2) Lubrication (2) 22 Shaft (2) Model (2)
23 CONTRUCTION ELECTRICAL MOTOR
24 Shaft Dia. At Propeller (Solid) mm 50 (2) Item No. M-7201 25 Shaft Dia. At Coupling (Solid) mm 60 (2) Type TEFC 26 Shaft Length from Mounting Surface mm 3000 (2) Power / Rpm (Driving) kW/rpm 2,2 / 1500 27 Impeller Diameter mm 560 (2) Power / Rpm (Lifting) kW/rpm 28 Mounting Plate Volts / Phase / Frequency V / - / Hz 380/3/50 29 Seal (2) Protection / Insulation IP55 / F / B 30 Nr & Size of Rings (2) 31 Blades 32 Driver Support Above tank (3) TEST 33 Agitator Support Above tank (3) Dimension Yes 34 Coupling (Motor Gear) (2) Running Yes 35 Fastening Flange (2) 36 Total Weight 37 NOTES 38 (1) By Vendor 39 (2) To be checked & verified by vendor 40 (3) Design support for at least 2.5 times vertical down load 41 Agitator will operating at preneutralizer filling and emptying 42 Operating vessel pressure Atm / -80 mm w.c AGITATOR DATA SHEET CLIENT : PT. PETROKIMIA GRESIK REV 0 1 2 3 PROJECT : PENAMBAHAN UNIT FLOKULASI & BY EK KOAGULASI EFFLUENT TREATMENT CHKD AS ITEM NO. : M-7404 A/B APVD LJ DOC NO. : DATE 1 OPERATING CONDITION PERFORMANCE 2 Fluid Handled VOLUTE FLOCCULANT Rotational as seen from bottom to top CCW 3 Service Temperature °C Amb. Lifting Heigh mm (2) 4 Spec. Grav. At Service Temperature 1,25 Rated Torque kN (2) 5 Viscocity at service temperature cp 1,5 Max. Torque kN (2) 6 Corrosion/Erosion Cause by Solids / Acids Driving system Electric Motor (2) 7 Agitator Speed rpm 60 (2) Duty Continous 24 h/d (2) 8 Agitator Type Paddle (2) Maximum Flow m3/hr (2) 9 Process : Chemical / Physical Suspension & mixing (2) Shaft Type Solid (2) 10 Baffles No (2) MANUFACTURE 11 Volume Working / Design m3 3 (2) Manufacture 12 Location (2) Blade Type Paddle 13 Type of Tank Rectangular (2) Blade Qty. Ea 3 14 Dimension (L x W x H) (mm x mm) 1500 x 2000 x 1000 (2) Row of Blade Ea 2 15 MATERIALS GEAR MOTOR 16 Shell SS 304 (3) Brand (2) 17 Propeller CS + RL (3) Type Vertical Gearmotor (2) 18 Intermediate Guide Yes Ratio 1 : 24 (2) 19 Flange CS + RL (2) Output Speed rpm 60 (2) 20 Mounting Plate (2) SF 1,5 (2) 21 Bolt & Nuts CS (2) Lubrication (2) 22 Shaft (2) Model (2)
23 CONTRUCTION ELECTRICAL MOTOR
24 Shaft Dia. At Propeller (Solid) mm 50 (2) Item No. M-7404 A/B 25 Shaft Dia. At Coupling (Solid) mm 60 (2) Type TEFC 26 Shaft Length from Mounting Surface mm 1300 (2) Power / Rpm (Driving) kW/rpm 0,75 / 1500 27 Impeller Diameter mm 400 (2) Power / Rpm (Lifting) kW/rpm 28 Mounting Plate Volts / Phase / Frequency V / - / Hz 380/3/50 29 Seal (2) Protection / Insulation IP55 / F / B 30 Nr & Size of Rings (2) 31 Blades 32 Driver Support Above tank (3) TEST 33 Agitator Support Above tank (3) Dimension Yes 34 Coupling (Motor Gear) (2) Running Yes 35 Fastening Flange (2) 36 Total Weight 37 NOTES 38 (1) By Vendor 39 (2) To be checked & verified by vendor 40 (3) Design support for at least 2.5 times vertical down load 41 Agitator will operating at preneutralizer filling and emptying 42 Operating vessel pressure Atm / -80 mm w.c AGITATOR DATA SHEET CLIENT : PT. PETROKIMIA GRESIK REV 0 1 2 3 PROJECT : PENAMBAHAN UNIT FLOKULASI & BY EK KOAGULASI EFFLUENT TREATMENT CHKD AS ITEM NO. : M-7403 A/B APVD LJ DOC NO. : DATE 1 OPERATING CONDITION PERFORMANCE 2 Fluid Handled FLOCCULANT Rotational as seen from bottom to top CCW 3 Service Temperature °C Amb. Lifting Heigh mm (2) 4 Spec. Grav. At Service Temperature 1,25 Rated Torque kN (2) 5 Viscocity at service temperature cp 15 Max. Torque kN (2) 6 Corrosion/Erosion Cause by Solids / Acids Driving system Electric Motor (2) 7 Agitator Speed rpm 60 (2) Duty Continous 24 h/d (2) 8 Agitator Type Paddle (2) Maximum Flow m3/hr (2) 9 Process : Chemical / Physical Suspension & mixing (2) Shaft Type Solid (2) 10 Baffles No (2) MANUFACTURE 11 Volume Working / Design m3 6 (2) Manufacture 12 Location (2) Blade Type Paddle 13 Type of Tank Rectangular (2) Blade Qty. Ea 3 14 Dimension (L x W x H) (mm x mm) 3000 x 2000 x 1000 (2) Row of Blade Ea 1 15 MATERIALS GEAR MOTOR 16 Shell SS 304 (3) Brand (2) 17 Propeller CS + RL (3) Type Vertical Gearmotor (2) 18 Intermediate Guide Yes Ratio 1 : 24 (2) 19 Flange CS + RL (2) Output Speed rpm 60 (2) 20 Mounting Plate CS + RL (2) SF 1,5 (2) 21 Bolt & Nuts CS (2) Lubrication (2) 22 Shaft (2) Model (2)
23 CONTRUCTION ELECTRICAL MOTOR
24 Shaft Dia. At Propeller (Solid) mm 50 (2) Item No. M-7403 A/B 25 Shaft Dia. At Coupling (Solid) mm 60 (2) Type TEFC 26 Shaft Length from Mounting Surface mm 1300 (2) Power / Rpm (Driving) kW/rpm 1,5/ 1500 27 Impeller Diameter mm 1000 (2) Power / Rpm (Lifting) kW/rpm 28 Mounting Plate Volts / Phase / Frequency V / - / Hz 380/3/50 29 Seal (2) Protection / Insulation IP55 / F / B 30 Nr & Size of Rings (2) 31 Blades 32 Driver Support Above tank (3) TEST 33 Agitator Support Above tank (3) Dimension Yes 34 Coupling (Motor Gear) (2) Running Yes 35 Fastening Flange (2) 36 Total Weight 37 NOTES 38 (1) By Vendor 39 (2) To be checked & verified by vendor 40 (3) Design support for at least 2.5 times vertical down load 41 Agitator will operating at preneutralizer filling and emptying 42 Operating vessel pressure Atm / -80 mm w.c AGITATOR DATA SHEET CLIENT : PT. PETROKIMIA GRESIK REV 0 1 2 3 PROJECT : PENAMBAHAN UNIT FLOKULASI & BY EK KOAGULASI EFFLUENT TREATMENT CHKD AS ITEM NO. : M-7402 A/B APVD LJ DOC NO. : DATE 1 OPERATING CONDITION PERFORMANCE 2 Fluid Handled COAGULANT Rotational as seen from bottom to top CCW 3 Service Temperature °C Amb. Lifting Heigh mm (2) 4 Spec. Grav. At Service Temperature 1,25 Rated Torque kN (2) 5 Viscocity at service temperature cp 15 Max. Torque kN (2) 6 Corrosion/Erosion Cause by Solids / Acids Driving system Electric Motor (2) 7 Agitator Speed rpm 60 (2) Duty Continous 24 h/d (2) 8 Agitator Type Paddle (2) Maximum Flow m3/hr (2) 9 Process : Chemical / Physical Suspension & mixing (2) Shaft Type Solid (2) 10 Baffles No (2) MANUFACTURE 11 Volume Working / Design m3 30 (2) Manufacture 12 Location (2) Blade Type Paddle 13 Type of Tank Cylindrical (2) Blade Qty. Ea 3 14 Dimension (ID x H) (mm x mm) 3500 x 3000 (2) Row of Blade Ea 2 15 MATERIALS GEAR MOTOR 16 Shell FRP (3) Brand (2) 17 Propeller CS + RL (3) Type Vertical Gearmotor (2) 18 Intermediate Guide Yes Ratio 1 : 24 (2) 19 Flange CS + RL (2) Output Speed rpm 60 (2) 20 Mounting Plate CS + RL (2) SF 1,5 (2) 21 Bolt & Nuts (2) Lubrication (2) 22 Shaft (2) Model (2)
23 CONTRUCTION ELECTRICAL MOTOR
24 Shaft Dia. At Propeller (Solid) mm 60 (2) Item No. M-7402 A/B 25 Shaft Dia. At Coupling (Solid) mm 70 (2) Type TEFC 26 Shaft Length from Mounting Surface mm 3300 (2) Power / Rpm (Driving) kW/rpm 1,5/ 1500 27 Impeller Diameter mm 875 (2) Power / Rpm (Lifting) kW/rpm 28 Mounting Plate Volts / Phase / Frequency V / - / Hz 380/3/50 29 Seal (2) Protection / Insulation IP55 / F / B 30 Nr & Size of Rings (2) 31 Blades 32 Driver Support Above tank (3) TEST 33 Agitator Support Above tank (3) Dimension Yes 34 Coupling (Motor Gear) (2) Running Yes 35 Fastening Flange (2) 36 Total Weight 37 NOTES 38 (1) By Vendor 39 (2) To be checked & verified by vendor 40 (3) Design support for at least 2.5 times vertical down load 41 Agitator will operating at preneutralizer filling and emptying 42 Operating vessel pressure Atm / -80 mm w.c AGITATOR DATA SHEET CLIENT : PT. PETROKIMIA GRESIK REV 0 1 2 3 PROJECT : PENAMBAHAN UNIT FLOKULASI & BY EK KOAGULASI EFFLUENT TREATMENT CHKD AS ITEM NO. : M-7401 A/B APVD LJ DOC NO. : DATE 1 OPERATING CONDITION PERFORMANCE 2 Fluid Handled CAUSTIC SODA Rotational as seen from bottom to top CCW 3 Service Temperature °C Amb. Lifting Heigh mm (2) 4 Spec. Grav. At Service Temperature 1,25 Rated Torque kN (2) 5 Viscocity at service temperature cp 1 Max. Torque kN (2) 6 Corrosion/Erosion Cause by Solids / Acids Driving system Electric Motor (2) 7 Agitator Speed rpm 170 (2) Duty Continous 24 h/d (2) 8 Agitator Type Propeler (2) Maximum Flow m3/hr (2) 9 Process : Chemical / Physical Suspension & mixing (2) Shaft Type Solid (2) 10 Baffles No (2) MANUFACTURE 11 Volume Working / Design m3 5 (2) Manufacture PT. ANEKA JASA GRHADIKA 12 Location (2) Blade Type Propeler 13 Type of Tank Cylindrical (2) Blade Qty. Ea 3 14 Dimension (ID x H) (mm x mm) 2000 x 1500 (2) Row of Blade Ea 2 15 MATERIALS GEAR MOTOR 16 Shell CS + RL (2) Brand (2) 17 Propeller CS + RL (2) Type Vertical Gearmotor (2) 18 Intermediate Guide Ratio 1:9 (2) 19 Flange CS + RL (2) Output Speed rpm 170 (2) 20 Mounting Plate CS + RL (2) SF 1,5 (2) 21 Bolt & Nuts (2) Lubrication (2) 22 Shaft CS + RL (2) Mode l (2)
23 CONTRUCTION ELECTRICAL MOTOR
24 Shaft Dia. At Propeller (Solid) mm 40 (2) Item No. M-7401 A/B 25 Shaft Dia. At Coupling (Solid) mm 50 (2) Type TEFC 26 Shaft Length from Mounting Surface mm 2300 (2) Power / Rpm (Driving) kW/rpm 4/ 1500 27 Impeller Diameter mm 800 (2) Power / Rpm (Lifting) kW/rpm 28 Mounting Plate Volts / Phase / Frequency V / - / Hz 380/3/50 29 Seal (2) Protection / Insulation IP55 / F / B 30 Nr & Size of Rings (2) 31 Blades 32 Driver Support Above tank (3) TEST 33 Agitator Support Above tank (3) Dimension Yes 34 Coupling (Motor Gear) (2) Running Yes 35 Fastening Flange (2) 36 Total Weight 37 NOTES 38 (1) By Vendor 39 (2) To be checked & verified by vendor 40 (3) Design support for at least 2.5 times vertical down load 41 Agitator will operating at preneutralizer filling and emptying 42 Operating vessel pressure Atm / -80 mm w.c AGITATOR DATA SHEET CLIENT : PT. PETROKIMIA GRESIK REV 0 1 2 3 PROJECT : PENAMBAHAN UNIT FLOKULASI & BY EK KOAGULASI EFFLUENT TREATMENT CHKD AS ITEM NO. : M-7104 APVD LJ DOC NO. : DATE 1 OPERATING CONDITION PERFORMANCE 2 Fluid Handled FLOCCULANT Rotational as seen from bottom to top CCW 3 Service Temperature °C Amb. Lifting Heigh mm (2) 4 Spec. Grav. At Service Temperature 1,25 Rated Torque kN (2) 5 Viscocity at service temperature cp 1,5 Max. Torque kN (2) 6 Corrosion/Erosion Cause by Solids / Acids Driving system Electric Motor (2) 7 Agitator Speed rpm 170 (2) Duty Continous 24 h/d (2) 8 Agitator Type Propeller (2) Maximum Flow m3/hr (2) 9 Process : Chemical / Physical (2) Shaft Type Solid (2) 10 Baffles Yes (2) MANUFACTURE 11 Volume Working / Design m3 80 (2) Manufacture PT. ANEKA JASA GRHADIKA 12 Location (2) Blade Type Propeller 13 Type of Tank Rectangular (2) Blade Qty. Ea 3 14 Dimension (L x W x H) (mm x mm) 4200 x 4200 x 4700 (2) Row of Blade Ea 2 15 MATERIALS GEAR MOTOR 16 Shell CS + RL (3) Brand (2) 17 Propeller CS + RL (3) Type Vertical Gearmotor (2) 18 Intermediate Guide Yes Ratio 1:9 (2) 19 Flange CS + RL (2) Output Speed rpm 170 (2) 20 Mounting Plate CS + RL (2) SF 1,5 (2) 21 Bolt & Nuts (2) Lubrication (2) 22 Shaft (2) Model (2)
23 CONTRUCTION ELECTRICAL MOTOR
24 Shaft Dia. At Propeller (Solid) mm 60 (2) Item No. M-7104 25 Shaft Dia. At Coupling (Solid) mm 70 (2) Type TEFC 26 Shaft Length from Mounting Surface 4800 (2) Power / Rpm (Driving) kW/rpm 5,5 / 1500 27 Impeller Diameter mm 840 (2) Power / Rpm (Lifting) kW/rpm 28 Mounting Plate Volts / Phase / Frequency V / - / Hz 380/3/50 29 Seal (2) Protection / Insulation IP55 / F / B 30 Nr & Size of Rings (2) 31 Blades 32 Driver Support Above tank (3) TEST 33 Agitator Support Above tank (3) Dimension Yes 34 Coupling (Motor Gear) (2) Running Yes 35 Fastening Flange (2) 36 Total Weight 37 NOTES 38 (1) By Vendor 39 (2) To be checked & verified by vendor 40 (3) Design support for at least 2.5 times vertical down load 41 Agitator will operating at preneutralizer filling and emptying 42 Operating vessel pressure Atm / -80 mm w.c AGITATOR DATA SHEET CLIENT : PT. PETROKIMIA GRESIK REV 0 1 2 3 PROJECT : PENAMBAHAN UNIT FLOKULASI & BY EK KOAGULASI EFFLUENT TREATMENT CHKD AS ITEM NO. : M-7103 APVD LJ DOC NO. : DATE 1 OPERATING CONDITION PERFORMANCE 2 Fluid Handled COAGULANT Rotational as seen from bottom to top CCW 3 Service Temperature °C Amb. Lifting Heigh mm (2) 4 Spec. Grav. At Service Temperature 1,25 Rated Torque kN (2) 5 Viscocity at service temperature cp 1 Max. Torque kN (2) 6 Corrosion/Erosion Cause by Solids / Acids Driving system (2) 7 Agitator Speed rpm 170 (2) Duty Continous 24 h/d (2) 8 Agitator Type Propeller (2) Maximum Flow m3/hr (2) 9 Process : Chemical / Physical (3) (2) Shaft Type Solid (2) 10 Baffles Yes (2) MANUFACTURE 11 Volume Working / Design m3 80 (2) Manufacture 12 Location Blade Type Propeller 13 Type of Tank Rectangular (2) Blade Qty. Ea 3 14 Dimension (L x W x H) (mm x mm) 4200 x 4200 x 4700 (2) Row of Blade Ea 2 15 MATERIALS GEAR MOTOR 16 Shell (3) Brand (2) 17 Propeller CS + RL (3) Type Vertical Gearmotor (2) 18 Intermediate Guide Yes Ratio 1:9 (2) 19 Flange CS + RL (2) Output Speed rpm 170 (2) 20 Mounting Plate CS + RL (2) SF 1,5 (2) 21 Bolt & Nuts (2) Lubrication (2) 22 Shaft (2) Model (2)
23 CONTRUCTION ELECTRICAL MOTOR
24 Shaft Dia. At Propeller (Solid) mm 60 (2) Item No. M-7103 25 Shaft Dia. At Coupling (Solid) mm 70 (2) Type TEFC 26 Shaft Length from Mounting Surface 4800 (2) Power / Rpm (Driving) kW/rpm 5,5 / 1500 27 Impeller Diameter mm 840 (2) Power / Rpm (Lifting) 28 Mounting Plate Volts / Phase / Frequency V / - / Hz 380/3/50 29 Seal (2) Protection / Insulation IP55 / F / B 30 Nr & Size of Rings (2) 31 Blades 32 Driver Support Above tank (3) TEST 33 Agitator Support Above tank (3) Dimension Yes 34 Coupling (Motor Gear) (2) Running Yes 35 Fastening Flange (2) 36 Total Weight 37 NOTES 38 (1) By Vendor 39 (2) To be checked & verified by vendor 40 (3) Design support for at least 2.5 times vertical down load 41 Agitator will operating at preneutralizer filling and emptying 42 Operating vessel pressure Atm / -80 mm w.c AGITATOR DATA SHEET CLIENT : PT. PETROKIMIA GRESIK REV 0 1 2 3 PROJECT : PENAMBAHAN UNIT FLOKULASI & BY EK KOAGULASI EFFLUENT TREATMENT CHKD AS ITEM NO. : M-7102 APVD LJ DOC NO. : DATE 1 OPERATING CONDITION PERFORMANCE 2 Fluid Handled NEUTRALIZER Rotational as seen from bottom to top CCW 3 Service Temperature °C Amb. Lifting Heigh mm (2) 4 Spec. Grav. At Service Temperature 1,25 Rated Torque kN (2) 5 Viscocity at service temperature cp 1,5 Max. Torque kN (2) 6 Corrosion/Erosion Cause by Solids / Acids Driving system Electric Motor (2) 7 Agitator Speed rpm 170 (2) Duty Continous 24 h/d (2) 8 Agitator Type Propeller (2) Maximum Flow m3/hr (1) (2) 9 Process : Chemical / Physical (3) (2) Shaft Type Solid (2) 10 Baffles Yes MANUFACTURE 11 Volume Working / Design m3 80 (2) Manufacture (1) 12 Location (2) Blade Type Propeller 13 Type of Tank Rectangular (2) Blade Qty. Ea 3 14 Dimension (L x W x H) (mm x mm) 4200 x 4200 x 4700 (2) Row of Blade Ea 2 15 MATERIALS GEAR MOTOR 16 Shell (3) Brand (1) 17 Propeller CS + RL (3) Type Vertical Gearmotor (1) 18 Intermediate Guide Yes Ratio 1:9 (1) 19 Flange CS + RL (2) Output Speed 170 (1) 20 Mounting Plate CS + RL (2) SF 1,5 (1) 21 Bolt & Nuts (2) Lubrication Yes (1) 22 Shaft (2) Model (1)
23 CONTRUCTION ELECTRICAL MOTOR
24 Shaft Dia. At Propeller (Solid) mm 60 (2) Item No. M-7102 25 Shaft Dia. At Coupling (Solid) mm 70 (2) Type TEFC 26 Shaft Length from Mounting Surface 4800 (2) Power / Rpm (Driving) kW/rpm 5,5 / 1500 27 Impeller Diameter mm 840 (2) Power / Rpm (Lifting) kW/rpm 28 Mounting Plate Volts / Phase / Frequency V / - / Hz 380/3/50 29 Seal (2) Protection / Insulation IP55 / F / B 30 Nr & Size of Rings (2) 31 Blades Paddle 32 Driver Support Above tank (3) TEST 33 Agitator Support Above tank (3) Dimension Yes 34 Coupling (Motor Gear) (2) Running Yes 35 Fastening Flange (2) 36 Total Weight 37 NOTES 38 (1) By Vendor 39 (2) To be checked & verified by vendor 40 (3) Design support for at least 2.5 times vertical down load 41 Agitator will operating at preneutralizer filling and emptying 42 Operating vessel pressure Atm / -80 mm w.c