Professional Documents
Culture Documents
Hyperdesmo - T: Transparent, Fully Aliphatic, Polyurethane Liquid Membrane For Waterproofing & Protection
Hyperdesmo - T: Transparent, Fully Aliphatic, Polyurethane Liquid Membrane For Waterproofing & Protection
com
Page 1/3
HYPERDESMO®-T
APPLICATION PREREQUISITES
Although HYPERDESMO®-T looks
Can be successfully applied on:
coloured, especially when it is in large containers,
Tiles, concrete, cement roof tiles, wood, corroded
it is stressed that the end result is, indeed,
metal, galvanized steel. For information about
transparent.
other substrates, please contact our tech
department.
RECOMMENDED FOR
Waterproofing and protection of:
Concrete substrate conditions (standard):
tiles,
Hardness: R28 = 15 MPa.
natural stone,
Humidity: W < 10%.
wood,
Temperature: 5-35 oC.
verandas and balconies,
Relative humidity: < 85%.
terraces.
Also suitable for sealing concrete: Applied in
Primer selection for special conditions and
thick, bubble-free, coats.
substrates:
Please refer to the Primer Selection Table.
LIMITATIONS
Not recommended for unsound substrates.
Non-porous substrates, such as ceramic tiles
Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & OHSAS 18001.
HYPERDESMO®-T/EE/24-11-17
alchimica.com
Page 2/3
HYPERDESMO®-T
APPLICATION PROCEDURE applied not earlier than 12 hours and not later
Clean the surface using a high-pressure washer, if than 2 days.
possible. Remove oil, grease and wax
contaminants. If used for concrete sealing, CONSUMPTION
cement laitance, loose particles, mould release Minimum total consumption: 0.2-1.0 kg/m2
agents, cured membranes must also be removed. according to application type.
CLEANING
Priming: Clean tools and equipment first with paper towels
Priming is required when application is on non- and then using SOLVENT-01. Rollers will not be
porous substrates, such as ceramic/glazy tiles. re-usable.
In this case, PRIMER-T is used. It is applied at a
low consumption of 50-60 ml/m2 with a clean PACKAGING
cloth without leaving any pools of fluid (apply as if
1 kg, 5 kg, 20 kg and 200 kg drums.
wiping the surface).
For porous substrates such as marble, coto,
SHELF LIFE
natural stones, fully aliphatic MICROPRIMER-PU
Can be kept for 12 months minimum in the
should be applied at max 200 ml/m2.
original unopened pails in dry places and at
temperatures of 5-25 oC. Once opened, use as
Mixing:
soon as possible.
Stir well, manually or with a low speed mixer. No
thinning is required but SOLVENT-01 may be
used. SAFETY INFORMATION
Contains volatile flammable solvents. Apply in
Application: well-ventilated, no smoking areas, away from
HYPERDESMO®-T is applied as soon as naked flames. In closed spaces use ventilators
PRIMER-T dries (after 15-20 min) with roller in and carbon active masks. Keep in mind that
one or two coats. Do not leave more than 24 solvents are heavier than air so they creep on the
hours between coats.In cases of MICROPRIMER- floor. The MSDS (Material Safety Data Sheet) is
PU application, HYPERDESMO®-T should be available on request.
TECHNICAL SPECIFICATIONS
In liquid form (before application):
80% dry matter in Xylol.
Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & OHSAS 18001.
HYPERDESMO®-T/EE/24-11-17
alchimica.com
Page 3/3
HYPERDESMO®-T
Tack free time, @ 77 oF (25
oC) & 55% RH
hours - 6
Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & OHSAS 18001.
HYPERDESMO®-T/EE/24-11-17