Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Weight choice: String length leading to adviced brace height:

Each pair of limbs is weighed with the median


adjustment of the tiller screws. The correspon- Bow size Xcurve Curve
ding weight is written on the limbs. 74'' 1785 mm N/A
72'' 1735 mm 1725 mm
Instructions and advices Brace height:
70'' 1700 mm 1685 mm
We recommand to respect the value in a
We congratulate you to have chosen Uukha 68'' 1650 mm 1635 mm
+-10mm range. Lower the brace height if you
products, and we hope that they will bring you focus on speed, increase it for stability and 66'' 1600 mm 1590 mm
as much pleasure as we took to develop them. comfort. Maintenance:
Safety: Curve and Xcurve models are very fast. Prefer a UUKHA products are covered with a varnish, use
Bow is a weapon, you should shoot in a range, brace height in the bottom of the range to get simply water and gentle soap to clean them.
and respect security intructions in use for this even more speed.
In case of impact having deteriorated the varnish,
activity. Brace Brace
Bow size Bow size be aware that the composite structure is perfectly
Assembly: height height waterproof and will not absorb water. To preserve
74'' 239 mm 64'' 205 mm the aspect of your product, you can make a final
Respect limbs direction : when the limb is in 72'' 232 mm 62'' 198 mm
shooting position, the weight and size marking improvement of varnish.
70'' 225 mm 60'' 192 mm
must be upside up. Guarantee:
68'' 218 mm 58'' 186 mm
Recommended setup: 66'' 211 mm 56'' 180 mm UUKHA products are guaranteed against any
manufacturing defect.
AMO draw
bow riser limbs String: In spite of our controls, if you detect a defect,
length
27'' 66'' 25'' 66'' The chart indicates the number of strands we please contact your dealer.
28'' 68'' 25'' 68'' advice depending on the weight measured at More information on www.uukha.com
29'' 70'' 25'' 70'' your draw length and the string material.
30'' 72'' 27'' 70'' Poundage 20# 25# 30# 35# 40# 45# 50#
31'' 74'' 27'' 72''
8125 12 14 16 18
AMO draw length = distance in inches between Astroflight
10 12 14 16 18
/Rhino
the nock and the pressure button + 1.75 ''.
8190 16 18 20 22 24
72 '' limbs are only available for Vx+ model.

You might also like