Professional Documents
Culture Documents
Ranaco Education: & Training Institute Writing Skill ENG 223
Ranaco Education: & Training Institute Writing Skill ENG 223
&
TRAINING INSTITUTE
Writing Skill
ENG 223
Individual Assignment
(Resume & Job application Letter)
FA Engineer
(Selangor - Kajang)
Requirements:
MOHD KAMARUDIN KHAMIS BIN ARSHAD
KAMPUNG JONG BELABOH,
24100 KIJAL,TERENGANU,
MALAYSIA Email: KAMLEYN@YAHOO.COM Mobile: (0139435260)
Chemical Engineers
Letter of Application December 8, 2021
In the coming month I will be relocating to the Johor area and I am actively pursuing positions in
the Johor Loop and downtown areas. In consideration of your advertised opportunity, I have
noted that your position strongly appeals both to my experience and personal goals. My levels of
enthusiasm, experience and interpersonal skills provide an excellent match for the requirements
of this position. As an Mechenical Engineer at Chipsoft Engineers in the Commercial Graphics
Adhesives Division , I performed an active and significant role in the development of new new
formula adhesive mixtures with characteristic additives as my primary role. I met the formidable
challenge of coordinating weekly contact with hundreds of businesses and organizations by
learning to effectively prioritize tasks, optimize my time and maximize the positive impact of my
efforts. Regardless of workload I managed to Chipsoft Engineers see that each contact received
adequate attention as to portray them as the only organization that mattered to K&M. I have
since been aiming towards relocating back to my home state of Terengganu.
Now, I am looking for a new opportunity where I may continue to provide innovative direction as
a member of your team. With a high degree of esteem, I wish to render my formal intent and
application for this position. I will welcome a personal interview at your convenience to discuss
this opportunity with you. I can be reached in confidence at the contacts above and will look
forward to hearing from you soon.
Sincerely,
Career Objective:
To obtain a position in quality control officer with opportunities for advancement enable
to maximize knowledge, skills and experiences in order to achieve mission and vision
organization.
PERSONAL OBJECTIF
Modernization and changes in the developing world, giving me the opportunity to test the
capabilities of themselves and learn from the experience of creating opportunities for the
future while trying to advance themselves in the working world.
PERSONAL DETAILS
EDUCATION BACKGROUND
RELEVANT COUREWORK
SKILLS
ii. Languages :
LANGUAGES WRITE READ SPEAK
Malay Good Very Good Very Good
English Fluent Good Fluent
School level
- association 1) scout
2) science & mathematic club
School level
- Sports 1. Football
2. Badminton
3. Sepak takraw
PERSONAL TRAITS
Have initiative
Can be a team player or work alone
Hard worker
Fast learner something new
Able to give full commitment
Good communications with people
A timely
EXPERIENCES
Previous work experience plays an important role while applying for a Job and hence it
should be well presented in the resume. Most of the questions during your resume will be
related to the previous job that you had and hence you should be well prepared for it. You
should begin with putting the name of the organization that you worked for, the duration
of your work and the post or the designation at which you were working. After this, you
can effectively place points in a bulleted format that talk about the responsibilities and the
achievements that you may have achieved during your stay at the previous organization.
The work experience of an experienced Mechanical Engineer applying for a job would
look like,
Mechanical Engineer
Responsible for the process and mechanical design, mechanical analysis, and
coordination of fabrication for Amine plants and Cryogenic plants.
Served as interim manager for the mechanical department
Developed numerous new standards for piping fabrication, plate frame
exchangers, and manual valves.
Performed extensive pipe stress analysis using Auto pipe software.
Developed and reviewed P&I drawings.
Served as primary technical contact for fabricators and
Equipment vendors.
Created data sheets and specifications for pressure vessels, exchangers, pumps,
valves, specialty items, and piping components.
Worked with piping and structural designers to ensure quality plant designs.
REFERENCES