Professional Documents
Culture Documents
Project Draft
Project Draft
PROJECT REPORT
Submitted by
<Student Name>
(Reg No: ……………………………)
201_ - 202_
MES COLLEGE, MARAMPALLY
ALUVA – 683107
CERTIFICATE
This is to certify that the project report entitled “Project Title” is the bonafied record of work carried out by
<Student Name> (Reg No:………………….....…………….) in partial fulfilment of the requirements for the
award of Diploma in Industrial Instrumentation and Automation of Mahatma Gandhi University, Kottayam
(A+ NAAC Reaccredited Aided College Affiliated to Mahatma Gandhi University) Marampally P.O, Aluva,
Ernakulam, Kerala-683107 201_-202_
DECLARATION
I hereby declare that the work presented for the project titled “Project Title ” is based on the
original work done by me under the guidance of Mr. ________ , assistant professor Dept: Of
BVoc Industrial Instrumentation and automation MES college, Marampally.
Place:
Date: <Student Name>
ACKNOWLEDEGEMENT
I would like to express my deep-felt gratitude to God Almighty for showering his grace upon
me, without which my project would not have materialized.
I am greatly obliged to Dr. A BIJU, principal, MES College. Marampally , for giving me this
opportunity.”
I take immense pleasure in thanking Dr UMESH B.T, Nodal officer, Vocational Studies, MES
college, Marampally , for his support and encouragement.
I take immense pleasure in thanking Mr. AJIMSHA MAIDEEN, coordinator of vocational
studies. MES college, Marampally, for his support and encouragement.
I would like to extend my deepest gratitude to my guide Mr. AMAL SAROJ, Assistant
Professor and HOD, Dept. Of B Voc Industrial Instrumentation and Automation, MES college
Marampally, for his guidance and vital encouragement. I am very grateful to my guide for his
eminent guidance in every stage of the project which helped me in moving forward with this
work.
I am greatly obliged to Mr. SACHIN K, Assistant professor, B voc Industrial Instrumentation
and Automation, MES college, Marampally, for his support and encouragement.
I would like to extend my deepest gratitude to Mr AJITH RAJAN, Assistant professor, B Voc
Industrial Instrumentation and Automation, MES college, Marampally, for his support and
encouragement.
I on this occasion, remember the valuable suggestions and prayers offered by my family
members and friends which were inevitable for the successful completion of this work.
<Student Name>
INDEX
LIST OF DIAGRAMS
ABSTRACT (page no 1)(HEADER – PROJECT TITLE, FOOTER – BVOC INDUSTRIAL INSTRUMENTATION AND
AUTOMATION
INTRODUCTION
CIRCUIT DIAGRAM
COMPONENTS USED
PIN OUT DIAGRAMS
DESIGN
WORKING
WORKING PROJECT PICTURE
ADVANTAGES
DISADVANTAGES
FUTURE SCOPE
CONCLUSION
REFERENCE