The document lists several hazards identified in Area 3 related to BOPs (blowout preventers) and cellars. It describes hazards such as working at heights without safety belts, inadequate footholds, missing cellar gratings, improper use of safety harnesses, and other unsafe practices. Each hazard includes recommendations to use safety equipment properly and ensure safety measures are followed to avoid injuries. The document emphasizes that any unsafe jobs should be stopped.
The document lists several hazards identified in Area 3 related to BOPs (blowout preventers) and cellars. It describes hazards such as working at heights without safety belts, inadequate footholds, missing cellar gratings, improper use of safety harnesses, and other unsafe practices. Each hazard includes recommendations to use safety equipment properly and ensure safety measures are followed to avoid injuries. The document emphasizes that any unsafe jobs should be stopped.
The document lists several hazards identified in Area 3 related to BOPs (blowout preventers) and cellars. It describes hazards such as working at heights without safety belts, inadequate footholds, missing cellar gratings, improper use of safety harnesses, and other unsafe practices. Each hazard includes recommendations to use safety equipment properly and ensure safety measures are followed to avoid injuries. The document emphasizes that any unsafe jobs should be stopped.
03-01-01-S&L Title WORKING ON BOPS AT HEIGHTS 01/09/99 • Not using safety belts. • Use safety belts or safety harness whenever working at more than 2 meters height. 03-02-01-S&L Title WORKING ON HYDRIL,CONNECTION 01/09/99 • No safety belt. No proper footholds. • Wear a safety belt or safety harness when working at heights, properly secured to a fixed point ABOVE. Ensure that there are adequate footholds. 03-03-01-S&L Title WORKING IN THE CELLAR 01/09/99 • No safety belt. Part of cellar grating is missing. • Use a safety belt. Ensure gratings are in place and secure. 03-04-01-S&L Title WORKING ON THE BELL NIPPLE 01/09/99 • Employee is working at height without a safety belt, and without a good foothold. • Wear a safety belt or safety harness when working at heights, properly secured to a fixed point ABOVE. Ensure that there is an adequate foothold. 03-05-01-S&L Title CLIMBING ON THE BOP 01/09/99 • Employee is working at height without a safety belt. • Wear a safety belt or safety harness when working at heights. 03-06-01-S&L Title CONNECTING SAFETY CABLES TO SHOCK HOSE 01/09/99 • Too much slack in the safety cable. It may not hold if the shock hose breaks. • Make sure there in minimum slack in safety cables. 03-07-01-NDS Title USING THE FALL ARRESTOR 01/09/99 • Safety harness being used, but lanyard is fastened BELOW the worker. • In this case the Fall Arrestor is safer than using a lanyard. 03-08-01-NDS Title KEEP CELLAR GRATINGS IN PLACE 01/09/99 • Part of cellar grating removed. • Cellar grating in place giving correct protection in cellar area. 03-09-01-NDS Title GOOD HOUSEKEEPING OF SAFETY GEAR 01/09/99 • Do not leave safety gear lying around. • Store safety gear properly. It is there to save you from injury. 03-10-01-HAL Title USING HAMMER WRENCH • Employees using hammer and hammer wrench without hold rope on 01/09/99 hammer wrench. • Employees using hammer and hammer wrench with hold rope on hammer wrench. 03-11-01-HAL Title WORKING ON WELL SITE • Employee working in cellar area without cellar grating placed correctly. 01/09/99 • Employee working in cellar area with cellar grating placed correctly.
Area 3 BOPs & Cellars Reference doc. Issued 01/09/00