Professional Documents
Culture Documents
Troubleshooting: NO Power Detected (Stand by LED OFF)
Troubleshooting: NO Power Detected (Stand by LED OFF)
Troubleshooting
NO Power Detected
(Stand by LED OFF)
No
PAFT1 is normal? Change fuse
Yes
PVDL1/2~PSDZ1/2
PFZZ1/2~ PVZL1/2 No Change short circuited or
SHORT and OPEN opened parts
Are normal?
Yes
Is there voitage at No
PQIZ1[Pin 5]? Change PQIZ1 IC.
(Over 10V)
Yes
Operation of PQIZ1 is No
Replace PQIZ1
Normal?
Yes
Check Current Digital Audio No Check the A/V Receiver No Set audio setting to
Setting is PCM. can Decode Current Bitstream in customer
Bit-Steam menu.
Yes Yes
Yes
No
Check 5V AVJ5 Replace AVJ5
AUDIO DATA
Yes
PIN 10 of
CN3 of Jack PCB No
Check the DIC1 on MAIN PCB
or CN2 of Main PCB has
1V pk-pk level?
Yes
Yes
Yes
Yes
# IF Recorder is under PSO (progressive scan output) MODE, it does not
output the CVBS& S-Video signal.
Pin10 and
Pin8 in CN3 of Jack PCB or No
Check the DIC1 on MAIN PCB
CN2 of Main PCB has *
normal level?
Yes
Yes
Yes
# Nomal level
: pin 10 is 1Vpk-pk
pin 8 is 0.28V on color burst
Yes
Yes
VIC1 of Main PCB Clock
Yes
Yes
A
Yes
Yes
# Nomal level
: pin 35 is 1Vpk-pk
pin 42 is 0.28V on color burst
No
Tuner input line signal is OK? Connect tuner line to TV directly
(jack PCB)
Yes
Yes
Pin2/4/6 in CN3 of No
Jack PCB or CN2 of Main PCB Check the DIC1 on MAIN B/D.
has * normal level?
Yes
Yes
Power is
No Check the connection between
Normal(5v) at VIC1(pin1)?
VIC1[pin1] and Power line (VL6, PPIF1).
Yes
Yes
Yes
# Nomal level
: pin 6 is 1Vpk-pk
pin 2/4 is + 0.35V
Check the RCA cable
Digital clock(10)
Audio Input is not Recording
Yes
Digital clock(11)
Yes
Yes
Yes
Digital clock(15)
Check the passive parts
around jack pin.
Yes
Yes
Yes
Yes
Yes
Yes
Is the 40pin No
FFC cable(betweenmain & deck) Reinsert FFC cable correctly
inserted correctly?
Yes
Is the wavefrom No
of DIC3 pin26 normal? Change the Main board
(MAIN PCB)
DIC3-Pin26
Yes
No
Tuner input line signal(pin16) Connect tuner line to TV directly
is OK? (Jack PCB)
Yes
Yes
No
Tuner line signal is OK? Connect tuner line to TV directly.
Yes
Supplied power
No
IC604(Jack PCB) is OK? Check its power line or around elements
(Pin 5 : about 5V)
Yes
Yes
Does XT4M01 No
make 3.58MHz signal? Check XT4M01 or around elements
(jack PCB)
Remocon Error
Yes
IC601(pin5) signal No
Check the signal line or surrounding
is OK? (Jack PCB) elements.
Yes
Change IC601 or
surrounding elements