How To Draw Something Hello Class, Today We Talk About, How To Draw A House

You might also like

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

HOW TO DRAW SOMETHING

Hello class, today we talk about, how to draw a house.

First to draw we will need a blank sheet of paper, a sharpened pencil, an eraser and colored
pencils. To draw a house:

- First: With the pencil we draw a triangle in the center of the sheet.

- Then, under the triangle we draw a square.

- Third: Inside the square we draw a rectangle in the center of the square.

after, inside the rectangle we make a circle (we are making the door of the house).

- And finally, inside the square we make two small squares as windows.

Now we have our house, then color your house as you like. To learn more check out our Artatack
channel.

HOW TO BUILD SOMETING

How to build a house

To build you need cement, nails, nails, screws, blo, water.

First, the land. The first thing to do is to mark out the area where you are going to build, and clean
the land: remove stones, branches, garbage and weeds. Once it is clean, the flattening is done, and
the trenches that will be used for the foundations are dug. If you are going to put a well or a
basement, they are also dug at this stage.

Then the Foundation. The foundation is the part that is buried and supports the entire
construction. The type of foundation depends on the soil of the land and the climate of the area.
At this stage, concrete is poured into the holes and trenches, and when dry, a waterproofing
membrane is applied.

Third, drainage. After the foundations are in place, the plumbing installation must be ready:
sewers, water faucets and everything that connects to the drainage system. It is backfilled to cover
it.
Structure. Now the skeleton of the house can begin to be built. The floor, wall and roof systems
are made. The windows and doors to the outside are also placed.

Fourth and most important, the services. Once the framework is in place, all the pipes, ducts and
cables that will be needed to install the basic services are laid. These installations will go inside the
walls, ceilings and floors. It is important to leave the holes where the outlets such as faucets,
switches or sockets will be installed.

Fifth the Finishing. This is the last stage. Here the coverings are made, and this is when doors,
windows, tiles, and wall textures are placed. Then the painting, baseboards, balustrades, railings,
and all the decorative details are placed.

ybueala, we have our house, now color your house to your liking. To learn more watch our
Artatack channel

Translated with www.DeepL.com/Translator (free version)

You might also like