Professional Documents
Culture Documents
HMI Button Don't Work - Entries - Forum - Industry Support - Siemens
HMI Button Don't Work - Entries - Forum - Industry Support - Siemens
Actions
2 Entries
Rating: Hi,
i.e: if you define that the HMI will use Ethernet to communicate with PLC,
then use PLCSIM(TCP); if STEP7 5.4 communicate with PLCSim ok the
Acesspoint of application in the HMIconnection definition should be
S7ONLINE.
hi dani, i have real plc (s71200), i try to test my HMI but doesn't work, i can do "download to
device" it work (so, no problem with the connection?) my wincc adv also opened, but when i
try to click HMI button nothing happened, i just give 1 input as pushbutton (start) and 1
output as motor. at the "pushbutton events" i gave "press & realese" with the "start" plc
tags.
Suggestion To thank
The second thread with the subject When trying to click HMI button nothing
happened is published within the conference SIMATIC WinCC (TIA Portal).
Best regards
Moderator
Jen_Moderator
Joined: 6/19/2017
Last visit: 10/1/2021
Posts: 5023
Rating:
(96)
Suggestion To thank
2 Entries
© Siemens AG 2009-2021 - Corporate Information | Privacy Policy | Cookie policy | Terms Of Use | Digital ID | Forum Terms
https://support.industry.siemens.com/tf//WW/en/posts/hmi-button-don-t-work/202643?page=0&pageSize=10 1/1