This document summarizes the design of a one-way slab. Key parameters include a span length of 2 meters, overall depth of 125 mm, and effective depth of 100 mm. The factored load is calculated as 9.19 kN. Reinforcement is designed with a main bar area of 144.93 mm^2 spaced at 300 mm. Shear checks show the design is safe. However, the development length required is 371.56 mm which exceeds the available length, so the design is not safe in development.
This document summarizes the design of a one-way slab. Key parameters include a span length of 2 meters, overall depth of 125 mm, and effective depth of 100 mm. The factored load is calculated as 9.19 kN. Reinforcement is designed with a main bar area of 144.93 mm^2 spaced at 300 mm. Shear checks show the design is safe. However, the development length required is 371.56 mm which exceeds the available length, so the design is not safe in development.
This document summarizes the design of a one-way slab. Key parameters include a span length of 2 meters, overall depth of 125 mm, and effective depth of 100 mm. The factored load is calculated as 9.19 kN. Reinforcement is designed with a main bar area of 144.93 mm^2 spaced at 300 mm. Shear checks show the design is safe. However, the development length required is 371.56 mm which exceeds the available length, so the design is not safe in development.
Ly(m) 4.5 m Ly/Lx 2.25 Characteristic strength of steel (Fy) 410 (N/mm^2) Characteristic strength of concrete (Fck) 30 (N/mm^2) Width of Support 230 mm Overall depth 125 mm Clear Cover 20 mm Effective depth 100 mm Diameter of Bar 10 mm Pt assumed 0.3 % FS 237.8 (N/mm^2) Modification Factor (MF)(from graph) 1.23 Effective depth Leff=Span(lx)+d 2.10 m Calculation Leff=Span(Lx)+Width of support 2.23 m Leff 2.10 m (Whichever is smaller) Depth Calculation Depth required 85.37 mm Check (dreq<deff :SAFE) SAFE If not then consider maximum of both Load Calculation Breadth (b) 1 m Dead load/Self weight 3.13 KN Floor Finish 1 KN Live load 2 KN Total load 6.13 KN Factored load (Wu) 9.19 KN Effective Depth Check Mu 5.06 KNm Mulim (xfckbd^2) 0.13 KNm davail 28.07 mm Check (davail<deff :SAFE) SAFE If not then consider maximum of both Reinforcement Ast main 144.93 mm^2 Calculation Spacing Least of 1)calculated 541.65 2)3d 300 3)300mm 300 Actual Spacing 300 mm Ast dist 120 mm^2 Spacing Least of 1)calculated 654.17 2)3d 300 3)300mm 300 Actual Spacing 300 mm Check of Shear Vu 9.65 (KN) 𝜏v 0.10 (N/mm^2) Ast prov 261.67 mm^2 Ast support 130.83 mm^2 Pt at support 0.131 % tc(from graph) 0.3 N/mm^2 K(from graph) 1.3 𝜏c 0.39 N/mm^3 Check 𝜏v<𝜏c :SAFE SAFE If not redesign Check of Development V1=Vu 9.65 KN Length M1=Mu/2 2.53 KNm 𝜏bd(from table) 2.4 N/mm^2 Lo 125 mm Ld req 371.56 mm Ld avail 466.25 mm Check Ld req <Ld avail :SAFE UNSAFE If not consider maximum of both.