Professional Documents
Culture Documents
M54HC75 M74HC75: 4 Bit D Type Latch
M54HC75 M74HC75: 4 Bit D Type Latch
M74HC75
. HIGH SPEED
. ICC = 2 µA (MAX.) AT TA = 25 °C
HIGH NOISE IMMUNITY
. 10 LSTTL LOADS
SYMMETRICAL OUTPUT IMPEDANCE
(Plastic Package) (Ceramic Package)
. tPLH = tPHL
WIDE OPERATING VOLTAGE RANGE M1R C1R
. VCC = (OPR) = 2 V TO 6 V
PIN AND FUNCTION COMPATIBLE WITH
54/74LS75
(Micro Package)
ORDER CODES :
M54HC75F1R M74HC75M1R
(Chip Carrier)
M74HC75B1R M74HC75C1R
DESCRIPTION
The M54/74HC75 is a high speed CMOS 4-BIT D-
TYPE LATCH fabricated in silicon gate C2MOS tech- PIN CONNECTIONS (top view)
nology. It has the same high speed performance of
LSTTL combined with true CMOS low power con-
sumption. It contains two groups of 2-bit latches con-
trolled by an enable input (G1•2 or G3•4). These two
latch groups can be used in different circuits. Each
latch has Q and Q outputs (1Q - 4Q and 1Q - 4Q).
The data applied to the data input is transfered to the
Q and Q outputs when the enable input is taken high
and the outputs will follow the data input as long as
the enable input is kept high. When the enable input
is taken low, the information data applied to the data
input is retained at the outputs. All inputs are
equipped with protection circuits against static dis-
charge and transient excess voltage.
NC =
No Internal
Connection
PIN DESCRIPTION
PIN No SYMBOL NAME AND FUNCTION
1, 14, 11, 8 1Q to 4Q Complementary Latch
Outputs
2, 3, 6, 7 1D to 4D Data Inputs
4 G3 • 4 Latch Enable Input,
latches 3 and 4
13 G1 • 2 Latch Enable Input,
latches 1 and 2
16, 15, 10, 9 1Q to 4Q Latch Outputs
12 GND Ground (0V)
5 VCC Positive Supply Voltage
SCHEMATIC CIRCUIT
2/9
M54/M74HC75
DC SPECIFICATIONS
3/9
M54/M74HC75
4/9
M54/M74HC75
mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
a1 0.51 0.020
b 0.5 0.020
b1 0.25 0.010
D 20 0.787
E 8.5 0.335
e 2.54 0.100
e3 17.78 0.700
F 7.1 0.280
I 5.1 0.201
L 3.3 0.130
Z 1.27 0.050
P001C
5/9
M54/M74HC75
mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
A 20 0.787
B 7 0.276
D 3.3 0.130
E 0.38 0.015
e3 17.78 0.700
N 10.3 0.406
Q 5.08 0.200
P053D
6/9
M54/M74HC75
mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
A 1.75 0.068
a1 0.1 0.2 0.004 0.007
a2 1.65 0.064
b 0.35 0.46 0.013 0.018
b1 0.19 0.25 0.007 0.010
C 0.5 0.019
c1 45° (typ.)
D 9.8 10 0.385 0.393
E 5.8 6.2 0.228 0.244
e 1.27 0.050
e3 8.89 0.350
F 3.8 4.0 0.149 0.157
G 4.6 5.3 0.181 0.208
L 0.5 1.27 0.019 0.050
M 0.62 0.024
S 8° (max.)
P013H
7/9
M54/M74HC75
mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
d1 2.54 0.100
d2 0.56 0.022
e 1.27 0.050
e3 5.08 0.200
F 0.38 0.015
G 0.101 0.004
M 1.27 0.050
M1 1.14 0.045
P027A
8/9
M54/M74HC75
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No
license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned
in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied.
SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express
written approval of SGS-THOMSON Microelectonics.
9/9