Professional Documents
Culture Documents
European Steel and Alloy Grades: Alloy Standards Search About Us EN 10016-2
European Steel and Alloy Grades: Alloy Standards Search About Us EN 10016-2
European Steel and Alloy Grades: Alloy Standards Search About Us EN 10016-2
YOU HERE: Steel numbers -> Number 1.06XX OR Steel and cast iron standards -> / EN 10016-2
C80D ( 1.0622 )
Grade : C80D
Number: 1.0622
EN 10016 - 2 : 1995 Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for
Standard:
general purpose rod
C Si Mn Ni P S Cr Mo Al Cu
0.78 - 0.83 0.1 - 0.3 0.5 - 0.8 max 0.2 max 0.035 max 0.035 max 0.15 max 0.05 max 0.01 max 0.25
P r ope r t ie s of gr a de C8 0 D ( 1 .0 6 2 2 )
At the request of the purchaser at the time of ordering, the manufacturer shall notify indicative values of tensile strenght.
Equiva le nt gr a de s of gr a de C8 0 D ( 1 .0 6 2 2 )
Warning! Only for reference
Russia
GOST
80
M e c ha nic a l pr ope r t ie s
M e c ha nis c he Eige ns c ha f t e n
Ca r a c t e r is t ique s m e c a nique s
R eH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d�elasticite minimale
R m Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc
He a t t r e a t m e nt c ondit ions
+A Soft annealed
+AC Annealed to achieve spheroidization of the carbides
+AR As rolled
+AT Solution annealed
+C Cold drawn / hard
+CR Cold rolled
http://www.steelnumber.com/en/steel_composition_eu.php?name_id=778 1/2
3/6/2014 C80D / 1.0622 - steel equivalent, mechanical properties, chemical composition
+CR Cold rolled
+FP Treated to ferrite-pearlite structure and hardness range
+I Isothermal annealing
+LC Cold drawn / soft
+M Thermo mechanical rolling
+N Normalized
+NT Normalized and tempered
+P Precipitation hardened
+PE Peeled
+QA Air quenched and tempered
+QL Liquid quenched and tempered
+QT Quenched and tempered
+S Treated to improve shearability
+SH As rolled and turned
+SR Cold drawn and stress relieved
+T Tempered
+TH Treated to hardness range
+WW Warm worked
+U Untreated
Chemical composition of C80D (1.0622). Equivalent grades of C80D (1.0622). Standards of C80D (1.0622).
Properties of C80D (1.0622). Hardness of C80D (1.0622). Strength of C80D (1.0622). Elongation of C80D (1.0622).
© 2011- 2014 All rights reserved. The contents from this site may not be reproduced.
The entire risk as to use of these content is assumed by you the user
http://www.steelnumber.com/en/steel_composition_eu.php?name_id=778 2/2