Professional Documents
Culture Documents
Shawcor - Guardian Inspections
Shawcor - Guardian Inspections
Shawcor - Guardian Inspections
CASING, DRILL
PIPE & ROD
SPECIFICATIONS
USED DRILL PIPE INSPECTION SPECIFICATIONS
IMPERIAL (in) / (lbs/ft)
METRIC (mm) / (kg/m)
PREMIUM
MATERIAL NEW PIPE CLASS 2
CLASS
Nominal Wall Minimum Minimum Minimum
O.D. 12.5% 20% 30%
Weight Thickness Wall Wall Wall
2 3/8 6.65 0.280 0.035 0.245 0.056 0.224 0.084 0.196
60.3 9.90 7.11 0.89 6.22 1.42 5.69 2.13 4.98
2 7/8 10.40 0.362 0.045 0.317 0.072 0.290 0.109 0.253
73.0 15.48 9.19 1.15 8.05 1.84 7.36 2.76 6.44
3 1/2 13.30 0.368 0.046 0.322 0.074 0.294 0.110 0.258
88.9 19.79 9.35 1.17 8.18 1.87 7.48 2.80 6.54
15.50 0.449 0.056 0.393 0.090 0.359 0.135 0.314
23.07 11.40 1.43 9.98 2.28 9.12 3.42 7.98
4 14.00 0.330 0.041 0.289 0.066 0.264 0.099 0.231
101.6 20.83 8.38 1.05 7.33 1.68 6.71 2.51 5.87
15.70 0.380 0.048 0.333 0.076 0.304 0.114 0.266
23.36 9.65 1.21 8.45 1.93 7.72 2.90 6.76
4 1/2 16.60 0.337 0.042 0.295 0.067 0.270 0.101 0.236
114.3 24.70 8.56 1.07 7.49 1.71 6.85 2.57 5.99
20.00 0.430 0.054 0.376 0.086 0.344 0.129 0.301
29.76 10.92 1.37 9.56 2.18 8.74 3.28 7.65
22.82 0.500 0.063 0.438 0.100 0.400 0.150 0.350
33.96 12.70 1.59 11.11 2.54 10.16 3.81 8.89
5 19.50 0.362 0.045 0.317 0.072 0.290 0.109 0.253
127.0 29.02 9.19 1.15 8.05 1.84 7.36 2.76 6.44
25.60 0.500 0.063 0.438 0.100 0.400 0.150 0.350
38.10 12.70 1.59 11.11 2.54 10.16 3.81 8.89
5 1/2 21.90 0.361 0.045 0.316 0.072 0.289 0.108 0.253
139.7 32.59 9.17 1.15 8.02 1.83 7.34 2.75 6.42
24.70 0.415 0.052 0.363 0.083 0.332 0.125 0.291
36.76 10.54 1.32 9.22 2.11 8.43 3.16 7.38
6 5/8 25.20 0.330 0.041 0.289 0.066 0.264 0.099 0.231
168.3 37.50 8.38 1.05 7.33 1.68 6.71 2.51 5.87
27.70 0.362 0.045 0.317 0.072 0.290 0.109 0.253
41.22 9.19 1.15 8.05 1.84 7.36 2.76 6.44
Page 1
OD GAUGING CHART
IMPERIAL (in) / (lbs/ft)
METRIC (mm) / (kg/m)
Page 2
DRILL PIPE & DRILL COLLAR CLASSIFICATIONS
STANDARD DRILL PIPE, DRILL COLLAR, HEAVY WEIGHT & SUBS COLOR CODES
O.D
REMAINING WALL
REDUCTION
CUTS AND GOUGES MINIMUM MASHES
(EXCLUDING SHARP WALL STRETCH
BOTTOM TRANSVERSE) THICKNESS SLIP AREA
One White
Band
70%
CLASS 2
70% 4% OF O.D.
CLASS 4 CRACKED
Four Punch (Red Band)
Marks
1 Green
1 Blue
X95 Grade
2 Blue
SS95 Grade
1 Purple
G105 Grade
2 Purple
SS105 Grade
1 Pink
S135 Grade
Form No. CC-3 DP Colour Chart Rev. Date: October 2017 Rev. 001
Page 3
DRILL PIPE & TOOL JOINT IDENTIFICATION INFORMATION
STANDARD DRILL PIPE, DRILL COLLAR, HEAVY WEIGHT & SUBS COLOR CODES
1 White
1 Green
2 Green
1 Blue
Undersize Tooljoint OD
1 Yellow
1 Red
1 Purple
1 Blue
1 Orange
Requires ID Cleaning
(Approx. 3 Ft. from Box End)
2 Orange
Plugged ID
(Approx. 3 Ft. from Box End)
1 White
SILVER
Form No. CC-3 DP Colour Chart Rev. Date: October 2017 Rev. 001
Page 4
DRILL PIPE & TOOL JOINT IDENTIFICATION INFORMATION
MARKING EXAMPLE
ZZ indicates ZZ company (fictional
Tool joint manufacturer’s symbol
for example only)
b - Pipe Manufacturers:
Pipe Mills or Processors
ACTIVE INACTIVE
MILL SYMBOL MILL SYMBOL
Algoma X Armco A
British Steel - American Seamless AI
Seamless Tubes LTD B B&W W
Dalmine D CF&I C
Kawaski H J&L J
Nippon I Lone Star L
NKK K Mannesmann M
Reynolds Aluminum RA Ohio O
Sumitomo S Republic R
Siderca SD TI Z
Tamsa T Tubemuse TU
US Steel N Vallourec V
Vallourec & Mannesmann VM Voest VA
Used U Wheeling Pittsburgh P
Grant Prideco GP Grant TFW TFW
Omsco OMS Prideco PI
Texas Steel Conversion TSC
Page 5
DRILL PIPE & TOOL JOINT IDENTIFICATION INFORMATION
a) Standard groove and mill-slot locations for E b) Standard groove and mill-slot locations for E
grade standard-weight drill pipe grade heavy-weight drill pipe
c) Standard groove and mill-slot locations for high- d) Standard groove and mill-slot locations for high-
strength standard-weight drill pipe strength heavy-weight drill pipe
3 KEY
Page 6
STANDARD HEAVY-WEIGHT SPECIFICATIONS
(OMSCO) IMPERIAL (in) / (lbs/ft)
METRIC (mm) / (kg/m)
TUBE TOOL JOINT
NOMINAL WEIGHT I.D. NOM. WALL CENTER CONNECTION NEW O.D. I.D. BEVEL DIAM.
O.D. O.D.
3 1/16 14.9 lb/ft 2 1/8 0.469 3 3/8 2 7/8 SLH90 3 3/4 2 1/8 3 23/32
77.8 22.17 kg/m 54 13.48 85.7 95.3 54 94.5
3 1/8 15.8 lb/ft 2 1/8 0.500 3 3/8 2 7/8 SLH90 3 3/4 2 1/8 3 23/32
79.4 23.51 kg/m 54 14.30 85.7 95.3 54 94.5
3 1/2 23.7 lb/ft 2 1/4 0.625 4 NC 38 4 3/4 2 1/4 4 37/64
88.9 35.27 kg/m 57.2 15.88 101.6 3 1/2 IF 120.7 57.2 116.3
4 29.9 lb/ft 2 9/16 0.719 4 1/2 NC 40 5 1/4 2 9/16 5 1/64
101.6 44.49 kg/m 65.2 18.26 114.3 4 FH 133.4 65.2 127.4
4 1/2 40.8 lb/ft 2 13/16 0.844 5 NC 46 6 1/4 2 13/16 5 23/32
114.3 60.72 kg/m 71.4 21.43 127 4 1/2 XH 158.8 71.4 145.3
5 50.0 lb/ft 3 1.000 5 1/2 NC 50 6 1/2 3 6 1/16
127 74.41 kg/m 76.2 25.40 139.7 4 1/2 IF 165.1 76.2 154
5 1/2 46.7 lb/ft 4 0.750 6 5 1/2 FH 7 1/4 4 6 23/32
139.7 69.5 kg/m 101.6 19.05 152.4 184.15 101.6 170.7
6 5/8 83.4 lb/ft 4 1.313 7 1/8 6 5/8 FH 8 4 7 45/64
168.3 124.11 kg/m 101.6 33.35 181.0 203.2 101.6 195.7
NOTE: This table is a guideline only. Contact customer and/or customer spec. for current information including
minimum wall thickness and tool joint O.D.s
NOTE: This table is a guideline only. Contact customer and/or customer spec. for current information including
minimum wall thickness and tool joint O.D.s
Page 7
STANDARD HEAVY-WEIGHT SPECIFICATIONS (DRILCO)
NOTE: This table is a guideline only. Contact customer and/or customer spec. for current information including
minimum wall thickness and tool joint O.D.s
Page 8
NEW & USED TUBING INSPECTION SPECIFICATIONS
IMPERIAL (in) / (lbs/ft)
IMPERIAL
METRIC (mm) / (kg/m)
METRIC
MATERIAL NEW A.P.I. SPECS. USED PIPE SPECS.
O.D. Nominal Nominal Inside Drift 5% Min. 12.50% Min. 15% Min. Wall 30% Red. Min. Wall
Weight Wall Dia. Dia. Red. Wall Red. Wall Red.
Thickness
1.050 1.2 0.113 0.824 0.730 0.006 0.107 0.014 0.099 0.017 0.096 0.034 0.079
26.67 1.79 2.87 20.9 18.54 0.14 2.73 0.36 2.51 0.43 2.44 0.86 2.01
1.315 1.8 0.133 1.049 0.955 0.007 0.126 0.017 0.116 0.02 0.113 0.040 0.093
33.40 2.68 3.38 26.6 24.26 0.17 3.21 0.42 2.96 0.51 2.87 1.01 2.36
2.24 0.179 0.957 0.863 0.009 0.170 0.022 0.157 0.027 0.152 0.054 0.125
3.33 4.55 24.3 21.92 0.23 4.32 0.57 3.98 0.68 3.86 1.36 3.18
1.660 2.4 0.140 1.38 1.286 0.007 0.133 0.018 0.123 0.021 0.119 0.042 0.098
42.16 3.57 3.56 35.1 32.66 0.18 3.38 0.44 3.11 0.53 3.02 1.07 2.49
3.07 0.191 1.278 1.184 0.010 0.181 0.024 0.167 0.029 0.162 0.057 0.134
4.57 4.85 32.5 30.07 0.24 4.61 0.61 4.24 0.73 4.12 1.46 3.40
1.900 2.9 0.145 1.61 1.516 0.007 0.138 0.018 0.127 0.022 0.123 0.044 0.102
48.26 4.32 3.68 40.9 38.51 0.18 3.50 0.46 3.22 0.55 3.13 1.10 2.58
3.73 0.200 1.50 1.406 0.010 0.190 0.025 0.175 0.030 0.170 0.060 0.140
5.55 5.08 38.1 35.71 0.25 4.83 0.64 4.45 0.76 4.32 1.52 3.56
2 1/16 3.25 0.156 1.751 1.657 0.008 0.148 0.020 0.137 0.023 0.133 0.047 0.109
52.39 4.84 3.96 44.5 42.09 0.20 3.76 0.50 3.47 0.59 3.37 1.19 2.77
2 3/8 4.7 0.190 1.995 1.901 0.010 0.181 0.024 0.166 0.029 0.162 0.057 0.133
60.33 6.99 4.83 50.7 48.29 0.24 4.58 0.60 4.22 0.72 4.10 1.45 3.38
5.95 0.254 1.867 1.773 0.013 0.241 0.032 0.222 0.038 0.216 0.076 0.178
8.85 6.45 47.4 45.03 0.32 6.13 0.81 5.65 0.97 5.48 1.94 4.52
2 7/8 6.5 0.217 2.441 2.347 0.011 0.206 0.027 0.190 0.033 0.184 0.065 0.152
73.03 9.67 5.51 62.0 59.61 0.28 5.24 0.69 4.82 0.83 4.69 1.65 3.86
7.9 0.276 2.323 2.229 0.014 0.262 0.035 0.242 0.041 0.235 0.083 0.193
11.76 7.01 59.0 56.62 0.35 6.66 0.88 6.13 1.05 5.96 2.10 4.91
8.7 0.308 2.259 2.165 0.015 0.293 0.039 0.270 0.046 0.262 0.092 0.216
12.95 7.82 57.4 54.99 0.39 7.43 0.98 6.85 1.17 6.65 2.35 5.48
3 1/2 9.3 0.254 2.992 2.867 0.013 0.241 0.032 0.222 0.038 0.216 0.076 0.178
88.90 13.84 6.45 76.0 72.82 0.32 6.13 0.81 5.65 0.97 5.48 1.94 4.52
10.2 0.289 2.922 2.797 0.014 0.275 0.036 0.253 0.043 0.246 0.087 0.202
15.18 7.34 74.2 71.04 0.37 6.97 0.92 6.42 1.10 6.24 2.20 5.14
12.95 0.375 2.75 2.625 0.019 0.356 0.047 0.328 0.056 0.319 0.113 0.263
19.27 9.53 69.9 66.68 0.48 9.05 1.19 8.33 1.43 8.10 2.86 6.67
15.5 0.476 2.548 2.423 0.024 0.452 0.060 0.417 0.071 0.405 0.143 0.333
23.07 12.09 64.7 61.54 0.60 11.49 1.51 10.58 1.81 10.28 3.63 8.46
4 9.5 0.226 3.548 3.423 0.011 0.215 0.028 0.198 0.034 0.192 0.068 0.158
101.60 14.14 5.74 90.1 86.94 0.29 5.45 0.72 5.02 0.86 4.88 1.72 4.02
11 0.262 3.476 3.351 0.013 0.249 0.033 0.229 0.039 0.223 0.079 0.183
16.37 6.65 88.3 85.12 0.33 6.32 0.83 5.82 1.00 5.66 2.00 4.66
4 1/2 12.75 0.271 3.958 3.833 0.014 0.257 0.034 0.237 0.041 0.230 0.081 0.190
114.30 18.97 6.88 100.5 97.36 0.34 6.54 0.86 6.02 1.03 5.85 2.07 4.82
15.5 0.337 3.826 3.701 0.017 0.320 0.042 0.295 0.051 0.286 0.101 0.236
23.07 8.56 97.2 94.01 0.43 8.13 1.0 7 7.49 1.28 7.28 2.57 5.99
Page 9
NEW & USED CASING INSPECTION SPECIFICATIONS
Page 10
NEW & USED CASING INSPECTION SPECIFICATIONS
IMPERIAL (in) / (lbs/ft)
IMPERIAL
METRIC (mm) / (kg/m)
METRIC
MATERIAL NEW A.P.I. SPECS. USED PIPE SPECS.
O.D. Nominal Nominal Inside Drift 5% Min. 12.50% Min. 15% Min. 30% Min.
Weight Wall Dia. Dia. Red. Wall Red. Wall Red. Wall Red. Wall
Thickness
7 17.00 0.231 6.538 6.413 0.012 0.219 0.029 0.202 0.035 0.196 0.069 0.162
177.8 25.30 5.87 166.1 162.89 0.29 5.57 0.73 5.13 0.88 4.99 1.76 4.11
20.00 0.272 6.456 6.331 0.014 0.258 0.034 0.238 0.041 0.231 0.082 0.190
29.76 6.91 164.0 160.81 0.35 6.56 0.86 6.05 1.04 5.87 2.07 4.84
23.00 0.317 6.366 6.241 0.016 0.301 0.040 0.277 0.048 0.269 0.095 0.222
34.23 8.05 161.7 158.52 0.40 7.65 1.01 7.05 1.21 6.84 2.42 5.64
26.00 0.362 6.276 6.151 0.018 0.344 0.045 0.317 0.054 0.308 0.109 0.253
38.69 9.19 159.4 156.24 0.46 8.74 1.15 8.05 1.38 7.82 2.76 6.44
29.00 0.408 6.184 6.059 0.020 0.388 0.051 0.357 0.061 0.347 0.122 0.286
43.16 10.36 157.1 153.90 0.52 9.85 1.30 9.07 1.55 8.81 3.11 7.25
32.00 0.453 6.094 5.969 0.023 0.430 0.057 0.396 0.068 0.385 0.136 0.317
47.62 11.51 154.8 151.61 0.58 10.93 1.44 10.07 1.73 9.78 3.45 8.05
35.00 0.498 6.104 5.879 0.025 0.473 0.062 0.436 0.075 0.423 0.149 0.349
52.09 12.65 155.0 149.33 0.63 12.02 1.58 11.07 1.90 10.75 3.79 8.85
38.00 0.540 5.920 5.795 0.027 0.513 0.068 0.473 0.081 0.459 0.162 0.378
56.55 13.72 150.4 147.19 0.69 13.03 1.71 12.00 2.06 11.66 4.11 9.60
7 5/8 24.00 0.300 7.025 6.900 0.015 0.285 0.038 0.263 0.045 0.255 0.090 0.210
193.7 35.72 7.62 178.4 175.26 0.38 7.24 0.95 6.67 1.14 6.48 2.29 5.33
26.40 0.328 6.969 6.844 0.016 0.312 0.041 0.287 0.049 0.279 0.098 0.230
39.29 8.33 177.0 173.84 0.42 7.91 1.04 7.29 1.25 7.08 2.50 5.83
29.70 0.375 6.875 6.750 0.019 0.356 0.047 0.328 0.056 0.319 0.113 0.263
44.20 9.53 174.6 171.45 0.48 9.05 1.19 8.33 1.43 8.10 2.86 6.67
33.70 0.430 6.765 6.640 0.022 0.409 0.054 0.376 0.065 0.366 0.129 0.301
50.15 10.92 171.8 168.66 0.55 10.38 1.37 9.56 1.64 9.28 3.28 7.65
39.00 0.500 6.625 6.500 0.025 0.475 0.063 0.438 0.075 0.425 0.150 0.350
58.04 12.70 168.3 165.10 0.64 12.07 1.59 11.11 1.91 10.80 3.81 8.89
8 5/8 24.00 0.264 8.097 7.972 0.013 0.251 0.033 0.231 0.040 0.224 0.079 0.185
219.1 35.72 6.71 205.7 202.49 0.34 6.37 0.84 5.87 1.01 5.70 2.01 4.69
28.00 0.304 8.017 7.892 0.015 0.289 0.038 0.266 0.046 0.258 0.091 0.213
41.67 7.72 203.6 200.46 0.39 7.34 0.97 6.76 1.16 6.56 2.32 5.41
32.00 0.352 7.921 7.796 0.018 0.334 0.044 0.308 0.053 0.299 0.106 0.246
47.62 8.94 201.2 198.02 0.45 8.49 1.12 7.82 1.34 7.60 2.68 6.26
36.00 0.400 7.825 7.700 0.020 0.380 0.050 0.350 0.060 0.340 0.120 0.280
53.57 10.16 198.8 195.58 0.51 9.65 1.27 8.89 1.52 8.64 3.05 7.11
40.00 0.450 7.725 7.600 0.023 0.428 0.056 0.394 0.068 0.383 0.135 0.315
59.53 11.43 196.2 193.04 0.57 10.86 1.43 10.00 1.71 9.72 3.43 8.00
44.00 0.500 7.625 7.500 0.025 0.475 0.063 0.438 0.075 0.425 0.150 0.350
65.48 12.70 193.7 190.50 0.64 12.07 1.59 11.11 1.91 10.80 3.81 8.89
49.00 0.557 7.511 7.386 0.028 0.529 0.070 0.487 0.084 0.473 0.167 0.390
72.92 14.15 190.8 187.60 0.71 13.44 1.77 12.38 2.12 12.03 4.24 9.90
Page 11
NEW & USED CASING INSPECTION SPECIFICATIONS IMPERIAL (in) / (lbs/ft)
IMPERIAL
METRIC (mm) / (kg/m)
METRIC
MATERIAL NEW A.P.I. SPECS. USED PIPE SPECS.
O.D. Nominal Nominal Inside Drift 5% Min. 12.50% Min. 15% Min. 30% Min.
Weight Wall Dia. Dia. Red. Wall Red. Wall Red. Wall Red. Wall
Thickness
9 5/8 32.30 0.312 9.001 8.845 0.016 0.296 0.039 0.273 0.047 0.265 0.094 0.218
244.5 48.07 7.92 228.6 224.66 0.40 7.53 0.99 6.93 1.19 6.74 2.38 5.55
36.00 0.352 8.921 8.765 0.018 0.334 0.044 0.308 0.053 0.299 0.106 0.246
53.57 8.94 226.6 222.63 0.45 8.49 1.12 7.82 1.34 7.60 2.68 6.26
40.00 0.395 8.835 8.679 0.020 0.375 0.049 0.346 0.059 0.336 0.119 0.277
59.53 10.03 224.4 220.45 0.50 9.53 1.25 8.78 1.50 8.53 3.01 7.02
43.50 0.435 8.755 8.599 0.022 0.413 0.054 0.381 0.065 0.370 0.131 0.305
64.74 11.05 222.4 218.41 0.55 10.50 1.38 9.67 1.66 9.39 3.31 7.73
47.00 0.472 8.681 8.525 0.024 0.448 0.059 0.413 0.071 0.401 0.142 0.330
69.94 11.99 220.5 216.54 0.60 11.39 1.50 10.49 1.80 10.19 3.60 8.39
53.50 0.545 8.535 8.379 0.027 0.518 0.068 0.477 0.082 0.463 0.164 0.382
79.62 13.84 216.8 212.83 0.69 13.15 1.73 12.11 2.08 11.77 4.15 9.69
10 3/4 32.75 0.279 10.192 10.036 0.014 0.265 0.035 0.244 0.042 0.237 0.084 0.195
273.1 48.74 7.09 258.9 254.91 0.35 6.73 0.89 6.20 1.06 6.02 2.13 4.96
40.50 0.350 10.050 9.894 0.018 0.333 0.044 0.306 0.053 0.298 0.105 0.245
60.27 8.89 255.3 251.31 0.44 8.45 1.11 7.78 1.33 7.56 2.67 6.22
45.50 0.400 9.950 9.794 0.020 0.380 0.050 0.350 0.060 0.340 0.120 0.280
67.71 10.16 252.7 248.77 0.51 9.65 1.27 8.89 1.52 8.64 3.05 7.11
51.00 0.450 9.850 9.694 0.023 0.428 0.056 0.394 0.068 0.383 0.135 0.315
75.90 11.43 250.2 246.23 0.57 10.86 1.43 10.00 1.71 9.72 3.43 8.00
55.50 0.495 9.760 9.604 0.025 0.470 0.062 0.433 0.074 0.421 0.149 0.347
82.59 12.57 247.9 243.94 0.63 11.94 1.57 11.00 1.89 10.69 3.77 8.80
11 3/4 42.00 0.333 11.084 10.928 0.017 0.316 0.042 0.291 0.050 0.283 0.100 0.233
298.5 62.50 8.46 281.5 277.57 0.42 8.04 1.06 7.40 1.27 7.19 2.54 5.92
47.00 0.375 11.000 10.844 0.019 0.356 0.047 0.328 0.056 0.319 0.113 0.263
69.94 9.53 279.4 275.44 0.48 9.05 1.19 8.33 1.43 8.10 2.86 6.67
54.00 0.435 10.880 10.724 0.022 0.413 0.054 0.381 0.065 0.370 0.131 0.305
80.36 11.05 276.4 272.39 0.55 10.50 1.38 9.67 1.66 9.39 3.31 7.73
60.00 0.489 10.772 10.616 0.024 0.465 0.061 0.428 0.073 0.416 0.147 0.342
89.29 12.42 273.6 269.65 0.62 11.80 1.55 10.87 1.86 10.56 3.73 8.69
13 3/8 48.00 0.330 12.715 12.559 0.017 0.314 0.041 0.289 0.050 0.281 0.099 0.231
339.7 71.43 8.38 323.0 319.00 0.42 7.96 1.05 7.33 1.26 7.12 2.51 5.87
54.50 0.380 12.615 12.459 0.019 0.361 0.048 0.333 0.057 0.323 0.114 0.266
81.10 9.65 320.4 316.46 0.48 9.17 1.21 8.45 1.45 8.20 2.90 6.76
61.00 0.430 12.515 12.359 0.022 0.409 0.054 0.376 0.065 0.366 0.129 0.301
90.78 10.92 317.9 313.92 0.55 10.38 1.37 9.56 1.64 9.28 3.28 7.65
68.00 0.480 12.415 12.259 0.024 0.456 0.060 0.420 0.072 0.408 0.144 0.336
101.20 12.19 315.3 311.38 0.61 11.58 1.52 10.67 1.83 10.36 3.66 8.53
72.00 0.514 12.347 12.191 0.026 0.488 0.064 0.450 0.077 0.437 0.154 0.360
107.15 13.06 313.6 309.65 0.65 12.40 1.63 11.42 1.96 11.10 3.92 9.14
Page 12
NEW & USED CASING INSPECTION SPECIFICATIONS
IMPERIAL
IMPERIAL (ft)
METRIC (Meters)
METRIC
Page 13
LINED TUBING &
USED TUBING SPECIFICATIONS
CASING SPECIFICATIONS
USED TUBING & CASING IDENTIFICATION
Normal
Tube Band
Normal
Tube Band
Requires ID Cleaning - 1 Orange
Normal
Tube Band
Normal
Tube Band
Damaged Thread - Insufficient Upset For Threading - 1 Red (behind class band), End & Threads Red
Normal
Tube Band
Page 14
LINED TUBING SPECIFICATIONS
LINED TUBING IDENTIFICATION
LINED TUBING IDENTIFICATION
White
New Tubing - ShawPROTM Lined Tubing (2-White)
White
New Tubing - ShawPRO HTTM Lined Tubing (3-White)
Form No. CC-2 Tubing Color Chart Rev. Date: January 2018 Rev. 002
Page 15
LINED TUBING SPECIFICATIONS
Maximum operating temparature 140°F (60°C) Maximum operating temparature 248°F (120°C)
Property Nominal Value Test Method *Application review to be performed for applications above 100°C.
EUE 8RD BARE TUBING DIMENSIONS & ShawPRO™ LINED TUBING SPECIFICATIONS
API STANDARD BARETUBING DIMESIONS
Tubing Diameter Weights Wall Thickness Nominal ID Drift Diameter
in. mm lb./ft. kg/m in. mm in. mm in. mm
2 3/8 60.3 4.70 6.99 0.190 4.83 1.995 50.67 1.901 48.28
2 7/8 73.0 6.50 9.87 0.217 5.51 2.441 62.00 2.347 59.61
3 1/2 88.9 9.30 13.84 0.254 6.45 2.992 75.99 2.867 72.82
4 1/2 114.3 12.75 18.97 0.271 6.88 3.958 100.53 3.833 97.35
Page 16
ROCKWELL HARDNESS TEST TABLES
Page 17
2.375” (60.3 mm) 2.000” (50.8 mm)
2.875” (73.0 mm) 2.500” (63.5 mm)
3.500” (88.9 mm) 3.000” (76.2 mm)
MATERIAL TEMPERATURE
AF
SUCKER ROD SIZES 400°F (200°C)
AU 250°F (120°C)
Ryton 400°F (200°C)
SUCKER ROD SIZES SUCKER ROD WEIGHTS
5/8” (0.625” or 15 mm) 29 lbs. (13.2 kg)
3/4” (0.750” or 19 mm) 42 lbs. (19.0 kg)
7/8” (0.875” or 22 mm) 57 lbs. (25.8 kg)
1” (1.000” or 25 mm) 74 lbs. (33.5 kg)
1 1/8” (1.125” or 28 mm) 94 lbs. (42.2 kg)
1 1/4” (1.250” or 32 mm) 110 lbs. (49.9 kg)
Page 18
COMMON SUCKER ROD SPECIFICATIONS - IMPERIAL
MEASUREMENTS
IDENTIFICATION AND MECHANICAL SPECIFICATIONS
Manufacturer Type Wrench Flat Marking Yield Strength psi* Tensile Strength psi*
API GRADE C
Weatherford S-60 S-60 90/105 100/115
Norris 30 WCN 30 70/80 95/105
Weatherford C11 EVIOT C 60/75 90/115
Upco 35 UPCO 35C 60 min 90/115
API GRADE K
Weatherford S-59 S-59 90/105 100/115
Norris 40 WCN 40 70/80 90/100
Weatherford K65 EVIOT K 60 min 90/100
Upco 45 UPCO K45 60 min 90/115
API GRADE D (Carbon Steel)
Weatherford S-67 S-67 110/125 120/135
Norris 54 54D 90/110 120/140
Weatherford D56 EVIOT MD56 85/110 115/140
Upco 75 UPCO D75 85 min 115/140
API GRADE D (Chrome Moly)
Norris 78 WCN 78D 95/110 120/140
Upco 75 UPCO 75A 85 min 115/140
Weatherford D EVIOT D 85/110 115/140
API GRADE D (Special Alloy)
Weatherford S-87 S-87 115-130 125/140
Norris 75 WCN 75D 105/115 120/140
Weatherford KD EVIOT KD63 85 min 115/140
SPECIAL SERVICE
Weatherford S-88 S-88 130/145 140/155
Norris 97 WCN 97D 110/120 140/150
Weatherford XD66 TRICO XD66 115 min 140/150
Weatherford EL EL -- --
Upco 50 UPCO 50 105/125 140/160
*Indicates minimum/maximum
Page 19
COMMON SUCKER ROD SPECIFICATIONS - IMPERIAL
MEASUREMENTS
SUCKER ROD COLOR CODES
Used inspected Rods (marked on box end)
5/8 29
3/4 42
7/8 57
1 74
1 1/8 94
Page 20
COMMON SUCKER ROD SPECIFICATIONS - METRIC
MEASUREMENTS
COMMON SUCKER ROD SPECIFICATIONS - METRIC
MEASUREMENTS
SUCKER ROD COLOR CODES
Used inspected Rods (marked on box end)
SUCKER ROD COLOR CODES
Used inspected Rods (marked on box end)
Rod Size(mm) kg
SUCKER ROD SHIPPING WTS.
15 13.2
Rod Size(mm) kg
19 19.0
15 13.2
22 25.8
19 19.0
25 33.5
22 25.8
28 42.2
25 33.5
28 42.2
Page 21
SUCKER ROD
SUCKER ROD SPECIFICATIONS
COLOR CHART
PHYSICAL PROPERTIES AS
78D ALLOY A4320 ALLOY SPECIAL A4330 HS SPECIAL
NORMALIZED AND TEMPERED
Tensile - ksi 120/140 140/150 140/150
Yield - ksi 100 min. 100 min. 115 min.
E.I. - 8” % 10 min. 10 min. 10 min.
Reduction in Area - % 45 min. 45 min. 45 min.
Hardness - Rc 22/30 22/30 30/33
Grade D Alloy - This sucker rod is manufactured from AISI A4142 steel. It is designed
primarily for moderate to heavy pumping applications where corrosion is at a minimum or
in conjunction with an effective corrosion inhibition program.
Alloy Special - This sucker rod is manufactured from AISI A4320 specialized steel and is
designed for highly corrosive applications in moderate to heavy pumping applications. It is
highly recommended that a corrosion inhibition program be used in conjunction to
minimize any detriment to the sucker rod string.
High Strength - This sucker rod is manufactured from AISI A4330 steel. It is designed
primarily for heavy to extra heavy loads in both reciprocating and progressive cavity
pumping applications. As well, this rod can be used in corrosive well fluids where a corrosion
inhibition program is present.
Page 22
SUCKER ROD COLOR CHART
API Grade D
Orange
(Special Alloy)
MBN
Special Service
Green
MBN MBN
API Class II
MBN
D
or Class III 2 Yellow
MBN
All inspections to API Specifications IIB and handled according to API RP-IIBR D
Form No. CC-1 SR Colour Chart Rev. Date: March 2017 Rev. 000
Page 23
SUCKER ROD GUIDES
SUCKER ROD GUIDES
STRAIGHT VANESTRAIGHT
TAPEREDVANE TAPERED HIGH FLOW TWIST
HIGH FLOW TWIST
Built to be reliable and
Built
long
to be
lasting,
reliable
theand
straight
long lasting,
vane rodthe straight vane rod The high flow twist rodTheguide
high flow
provides
twistincreased
rod guide flow
provides increased flow
guide provides cost guide
effective
provides
protection
cost effective
for your valuable
protection for your valuable with minimal turbulence
with due
minimal
to itsturbulence
wide flow due
channels.
to its wide flow channels.
artificial lift equipment.
artificial
Offering
lift equipment.
superior centralization
Offering superior
of centralization of Thanks to its 360° wraparound
Thanks to itsvanes,
360° the
wraparound
guide vanes, the guide Material Base Polymer
Mate
translates to decreased workover costs and reduced This combined with its abilit
Top View
downtime. production
FB-1tubing makes th
PPA FB-1
deviated well bores.
EXTENDED STRAIGHT
EXTENDED
VANESTRAIGHT VANE HURRICANE HURRICANE
Longer than our straight
Longer vanethan
guides,
our straight
the extended
vane guides, the extended Similar to the high flow
Similar
twist
toguide,
the high
theflow
hurricane
twist guide,
provides
the hurricane provides
straight vane rod guidestraight
offers vane
a larger
rod guide
footprint
offers
with
a larger footprint with increased flow with increased
minimal turbulence,
flow with minimal
increased
turbulence,
paraffin increased paraffin
remarkably reducedremarkably
flow resistance.
reduced
Providing
flow resistance.
superior Providing superior movement and superiormovement
centralization
and superior
of rodcentralization
string. Also, of rod string. Also,
wear resistance withwear the resistance
least amount withofthe
material
least down
amount of material down the hurricane provides
thesuperior
hurricane wear
provides
resistance
superior
because
wear resistance because
hole, it is suitable forhole,
toughit iswells
suitable
with for
high
tough
deviation.
wells with high deviation. of its large surface area.
of its large surface area.
Guide Type Guide
Guide Type 2" 2½" 3" Rod Pumping PC Pumping Wells Deviated Well Bores
Straight Vane
Wide Vane
Wear Pad
Page 24
NOTES
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
Page 25
NOTES
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
Page 26
Oilfield Asset Management Locations
SALES - CALGARY, AB
(403) 233-7561 | Suite 2200, 333 7th Ave SW
BROOKS, AB
(403) 362-9786 | 143006 Hwy 1A
ESTEVAN, SK
(306) 634-8085 | P.O. Box 1185 Highway 47 North
GRANDE PRAIRIE, AB
(780) 532-0550 | 72056 Township Road 712
LLOYDMINSTER, AB
(780) 875-6222 | Reinhart Business Park Block 2 Lot 5
NISKU, AB (NORTH)
(780) 955-3380 | 950-30th Ave Nisku
NISKU, AB (SOUTH)
(780) 955-7788 | 1511 4th Street Nisku
RED DEER, AB
(403) 342-1880 | 4115 Henry Street