Professional Documents
Culture Documents
Control Valves Data Sheet: Client: Plant
Control Valves Data Sheet: Client: Plant
MASS: DENSITY-MOLECULAR WEIGHT 779,1 Kg/m3 / DENSITY (UPSTR. CON.) Kg/m3 779,3 1001,5
MASS VAPORED - SOLIDS MASS CONT. / % / % CV FL Xt RANGEA- DES. TEMP. DP MAX. LEAK.
DES.PRESS./Dp max. CL. VLV - LEAKAGE CL. 90 Kg/cm2 IV (FCI 70.2) BILITY MAX °C (CL. VALVE) Kg/cm2 CLASS
LINE NUMBER 2"-BFW-007-M3BJGC-H
AIR FAILURE 2 WAY VALVE OPEN CLOS. LOCKED
---
---
10 --- 303 86 IV
3 WAY VALVE OPEN TO (fig. 1)
MATER. PLUG - SEAT 440C St. St. 440C St. St. SS316+STELLITE SS 400 + STELLITE
POSI- TYPE - DEGREE OF PROTECTION - MODEL PNEUMATIC ELECTRIC-PNEUMATIC (9) (3) + (4) MOD. SVI2AP-21113111
TIONER INPUT SIGN. RANGE-AIR SUPPLY- ACTION 4-20 mA (2 wire) 3 + 15 PSI 1,4 barg 40 psig DIRECT
EXECUTION OF PNEUM. CONNECTIONS STANDARD WITHOUT COPPER AND ITS ALLOYS ST. STEEL AISI 316L
NOTES:
a) AMBIENT TEMPERAT: MIN 22°C/ MAX 36,5°C (DESIGN 33°C). RELATIVE HUMIDITY 100%
This area is subject to a typical moonson climate: hot and humid. Thinder and Ligthning to be considered. All equipment shall be furnished with all necessary
weather or anticondensation protection to prevent damage due to climate or plant atmosphere. As minimum all the enclosure shall be dust and damp protected
b) PNEUMATIC CONNECTION: IMPULSE LINE 1/2" 316 S.S. (Imperial size tubing shall be applied). FITTING S.S. 316 DOUBLE FERRULE COMPRESSION SWAGELOK.
d) ALL ITEMS SHALL BE ATEX CERTIFIED Exd (Explosion Proof - IIB +H2 T4)
1) Sound level < 85 db(A) @1m. Sound level value to be considered with insulated valve.
2) Construction material shall be selected to avoid use of alloy containing low melting point elements, including (but not limited to) lead, mercury sulfur, etc.
3) I/P positioner shall be analog 4-20 mA SMART HART with IP66 enclosure
5) Valve stem shall be weather and dust protected by suitable means. Stem shall have weather proof protection covers of approved construction.
6) NAMEPLATE: Stainless Steel nameplate indicating the valve service and reference number. Nameplate shall be securely fixed by screws or adhesive.
7) Pneumatic operator shall be designed for operation at 5,5 kg/cm2g. Air which will vary in pressure from 4,6 kg/cm2g to 8,7 kg/cm2g.
8) Pneumatic operator and yoke shall be steel construction and the diaphgram shal be of molded rubber or other suitable material.
PURCHASING DATA
Mat. Requisition No. Manufacturer Supplier Order No.