Professional Documents
Culture Documents
1100 Series: Diesel Engine - Industrial Open Power Unit
1100 Series: Diesel Engine - Industrial Open Power Unit
1104D-44TA
Diesel Engine - Industrial Open Power Unit
75 kW/100.6 bhp
Engine Performance Net Intermittent Engine Speed Pump Sets Engine Speed
Max power (kW) 75.0 2200 63.5 2000
Max power (bhp) 100.6 2200 85.4 2000
Max torque (Nm) 416.0 1400 353.0 1400
Max torque (lbf ft) 306.8 1400 261.0 1400
Power for a run-in engine after 60 hours.
Net Intermittent = Intermittent service where maximum power and/or are, cyclic (time at full load not to exceed 50%).
Rating standard ISO/TR 14396.
All information in this document is substantially correct at time of printing and may be altered subsequently Publication No.1906/05/09 Produced in England ©2007 Perkins Engines Company Limited
1100 Series
1104D-44TA IOPU
Standard IOPU Specification
Air inlet 1260 mm 734 mm
Mounted air filter and turbocharger
Cooling system 964
Fan (pusher or puller) mm
Fan drive
Radiator
Water pump
Electrical equipment
Alternator (12 or 24 volt)
Starter motor (12 or 24 volt)
Flywheel and housing
Governing Key
430 N denotes ‘as found’ governing.
418.0
420
SAE 3 flywheel housing 410
x
400
Torque, Nm
Fuel system 390
380
370
Fuel filter 360
N
d
350 loa A
85%
340
Lubrication system 330
Maximum gross power for
matching pump sets
90
80
Timing case oil filler 75
70
65
Mountings 60
Power, kW
55
45
40
d
PTO 85%
loa
35
30
20
(142/280 Nm) 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300
15
Speed, rev/min
Performance after 60 hours operation with fuel oil at 40°C at pump inlet.
Starting aids
Glow plugs
General Data
Literature
Number of cylinders 4 in-line
User’s Handbook
Bore and stroke 105 mm x 127 mm
Displacement 4.4 litres
Aspiration Turbocharged air to air
Option Groups charge cooled
The 1104D-44TA IOPU offers a wide choice of
Cycle 4 stroke
standard build specifications to meet specific
customer needs:
Combustion system Direct injection
12 or 24 volt alternator Compression ratio 18:2
Pusher or puller fan Direction of rotation Anti-clockwise, viewed on
SAE A or SAE B front PTO flywheel
(142/280 Nm) Cooling system Liquid
SAE B provides 63 kW/85 hp Total lubrication system 7.9 litres
Air compression
capacity
Total coolant capacity 17 litres
Dimensions Length 1260 mm
Width 734 mm
Height 964 mm
Dry weight 567 kg
All information in this document is substantially correct at time of printing and may be altered subsequently
Publication No.1906/05/09 Produced in England ©2007 Perkins Engines Company Limited