Professional Documents
Culture Documents
Lysaght Bondek II Catalogue 2009
Lysaght Bondek II Catalogue 2009
Rib
54 24 44
13
Cover Width 600
Pan 0.75 or 1.00 BMT
FIG.1
Where required, use wide Centralise Abuting Sheets Bearing of LYSAGHT BONDEK II
form ply strips to minimise at Slab Support. at propping (minimum of 100mm) Specified
End of Sheet
bearer marks Edge/End
End of Cover to Sheet
Sheet
LYSAGHT
LYSAGHT
BONDEK II
Bondek II
6
Fixing at end of sheets
Reinforcement
LYSAGHT BONDEK II Sheet fixed
located where required
to beams where required
FIG.5
8
No 12-14 x 20
No 12-14 x 20mm
Self-Drilling
Tapping Screw
No 12-14 x 20
Where necessary, BONFILL
Abutting BONDEK II sheet inserted into ribs of BONDEK II
sheet to provide support for
overlaying waterprooftape.
Sizeable gap
between
Waterproof tape
BONDEK II sheets Rib ends
over gap. taped over
FIG.8
12