Professional Documents
Culture Documents
Telefon LG KF 510
Telefon LG KF 510
Telefon LG KF 510
Service Manual
KF510c/KF510d
Model : KF510c/KF510d
* The information in this manual is subject to change without notice and should not be construed as a
commitment by LGE Inc. Furthermore, LGE Inc. reserves the right, without notice, to make changes to
equipment design as advances in engineering and manufacturing methods warrant.
* This manual provides the information necessary to install, program, operate and maintain the KF510.
Copyright © 2008 LG Electronics. Inc. All right reserved. -3- LGE Internal Use Only
Only for training and service purposes
LGE Internal Use Only -4- Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Table Of Contents
1. INTRODUCTION .....................................7 5.6 Receiver & Speaker trouble ...........................87
1.1 Purpose .......................................................... 7 5.7 Microphone trouble ........................................90
1.2 Regulatory Information.................................... 7 5.8 Vibrator trouble...............................................92
1.3 ABBREVIATION.............................................. 9 5.9 Keypad back light trouble...............................94
5.10 SIM & uSD trouble .......................................96
2. PERFORMANCE ...................................11 5.11 Touch pad trouble ........................................99
2.1 H/W Features .................................................11 5.12 Trouble Shooting of Receiver Part .............101
2.2 Technical specification ...................................12 5.13 Trouble Shooting of Transmitter Part .........107
4. PCB layout............................................71
4.1 Main & Sub PCB component placement........71
5. Trouble shooting..................................75
5.1 Trouble shooting test setup............................75
5.2 Power on Trouble...........................................76
5.3 Charging trouble.............................................80
5.4 LCD display trouble........................................83
5.5 Camera Trouble .............................................85
Copyright © 2008 LG Electronics. Inc. All right reserved. -5- LGE Internal Use Only
Only for training and service purposes
LGE Internal Use Only -6- Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
1. INTRODUCTION
1. INTRODUCTION
1.1 Purpose
This manual provides the information necessary to repair, calibration, description and download the
features of the KF510.
A. Security
Toll fraud, the unauthorized use of telecommunications system by an unauthorized part (for example,
persons other than your company’s employees, agents, subcontractors, or person working on your
company’s behalf) can result in substantial additional charges you’re your telecommunications
services. System users are responsible for the security of own system.
There are may be risks of toll fraud associated with your telecommunications system. System users
are responsible for programming and configuring the equipment to prevent unauthorized use. LGE
does not warrant that this product is immune from the above case but will prevent unauthorized use of
common-carrier telecommunication service of facilities accessed through or connected to it. LGE will
not be responsible for any charges that result from such unauthorized use.
B. Incidence of Harm
If a telephone company determines that the equipment provided to customer is faulty and possibly
causing harm or interruption in service to the telephone network, it should disconnect telephone
service until repair can be done. A telephone company may temporarily disconnect service as long as
repair is not done.
C. Changes in Service
A local telephone company may make changes in its communications facilities or procedure.
If these changes could reasonably be expected to affect the use of the KF600 or compatibility with the
network, the telephone company is required to give advanced written notice to the user, allowing the
user to take appropriate steps to maintain telephone service.
D. Maintenance Limitations
Maintenance limitations on the KF510 must be performed only at the LGE or its authorized agents.
The user may not make any changes and/or repairs expect as specifically noted in this manual.
Therefore, note that unauthorized alternations or repair may affect the regulatory status of the system
and may void any remaining warranty.
Copyright © 2008 LG Electronics. Inc. All right reserved. -7- LGE Internal Use Only
Only for training and service purposes
1. INTRODUCTION
F. Pictures
The pictures in this manual are for illustrative purposes only; your actual hardware may look slightly
different.
ATTENTION
Boards, which contains Electrostatic Sensitive Device(ESD), are indicated by the sign.
Following information is ESD handling: Service personnel should ground themselves by using a wrist
strap when exchange system boards.
When repairs are made to a system board, they should spread the floor with anti-static mat which is
also grounded. Use a suitable, grounded soldering iron. Keep sensitive parts in these protective
packages until these are used. When returning system boards or parts such as EEPROM to the
factory, use the protective package as described.
LGE Internal Use Only -8- Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
1. INTRODUCTION
1.3 ABBREVIATION
For the purposes of this manual, following abbreviations apply:
BB Baseband
EL Electroluminescence
IF Intermediate Frequency
Copyright © 2008 LG Electronics. Inc. All right reserved. -9- LGE Internal Use Only
Only for training and service purposes
1. INTRODUCTION
LGE LG Electronics
RF Radio Frequency
TA Travel Adapter
LGE Internal Use Only - 10 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
2. GENERAL PERFORMANCE
2. GENERAL PERFORMANCE
PC Synchronization Yes
Vibrator Yes
Buzzer No
C-Mic Yes
Receiver Yes
Copyright © 2008 LG Electronics. Inc. All right reserved. - 11 - LGE Internal Use Only
Only for training and service purposes
2. GENERAL PERFORMANCE
LGE Internal Use Only - 12 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
2. GENERAL PERFORMANCE
GSM8500/GSM900/EGSM
100 +0.5
200 -30
250 -33
400 -60
100 +0.5
200 -30
250 -33
400 -60
6,000 -73
GSM8500/GSM900/EGSM
1,200 -21
1,800 -24
Copyright © 2008 LG Electronics. Inc. All right reserved. - 13 - LGE Internal Use Only
Only for training and service purposes
2. GENERAL PERFORMANCE
LGE Internal Use Only - 14 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
2. GENERAL PERFORMANCE
Copyright © 2008 LG Electronics. Inc. All right reserved. - 15 - LGE Internal Use Only
Only for training and service purposes
2. GENERAL PERFORMANCE
LGE Internal Use Only - 16 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
2. GENERAL PERFORMANCE
Copyright © 2008 LG Electronics. Inc. All right reserved. - 17 - LGE Internal Use Only
Only for training and service purposes
2. GENERAL PERFORMANCE
LGE Internal Use Only - 18 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
3. TECHNICAL BRIEF
Copyright © 2008 LG Electronics. Inc. All right reserved. - 19 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
LGE Internal Use Only - 20 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
Copyright © 2008 LG Electronics. Inc. All right reserved. - 21 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
T_OUT
Resource Interconnection Description
T_OUT0 TXON_PA PAM Power on
T_OUT1 FE2 FEM control
T_OUT2 PA_BAND TX RF band select
T_OUT3 FE1 FEM control
T_OUT4 Other operation -
T_OUT5 Other operation -
T_OUT6 PA MODE PAM Mode select
LGE Internal Use Only - 22 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
Copyright © 2008 LG Electronics. Inc. All right reserved. - 23 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
LGE Internal Use Only - 24 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
Copyright © 2008 LG Electronics. Inc. All right reserved. - 25 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
LGE Internal Use Only - 26 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
VREF
IREF
JTAG I/F
TDO TDO JTAG
TDI TDI JTAG
TMS TMS JTAG
TCK TCK JTAG
TRST_n _TRST JTAG
RTCK RTCK JTAG
ETM I/F
TRIG_IN TRIG_IN ETM (Embedded Trace Macro Cell)
MON1 MON1 ETM
MON2 MON2 ETM
TRACESYNC TRACESYNC ETM
TRACECLK TRACECLK ETM
PIPESTAT[2] PIPESTAT2 ETM
PIPESTAT[1] PIPESTAT1 ETM
PIPESTAT[0] PIPESTAT0 ETM
TRACEPKT[0] TRACEPKT(0) ETM
TRACEPKT[1] TRACEPKT(1) ETM
TRACEPKT[2] TRACEPKT(2) ETM
TRACEPKT[3] TRACEPKT(3) ETM
TRACEPKT[4] TRACEPKT(4) ETM
TRACEPKT[5] TRACEPKT(5) ETM
TRACEPKT[6] TRACEPKT(6) ETM
TRACEPKT[7] TRACEPKT(7) ETM
Memory
MEM_AD[0] D(0)
MEM _AD[1] D(1)
MEM _AD[2] D(2)
MEM _AD[3] D(3)
MEM _AD[4] D(4)
MEM _AD[5] D(5)
MEM _AD[6] D(6)
MEM _AD[7] D(7)
MEM _AD[8] D(8)
MEM _AD[9] D(9)
MEM _AD[10] D(10)
MEM _AD[11] D(11)
MEM _AD[12] D(12)
MEM _AD[13] D(13)
Copyright © 2008 LG Electronics. Inc. All right reserved. - 27 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
LGE Internal Use Only - 28 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
Copyright © 2008 LG Electronics. Inc. All right reserved. - 29 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
Block Description
• Highly efficient step-down converter for main digital baseband supply including Core, DSP and
memory interface (External Bus Unit).
• Support of S-GOLD standby power-down concept
• Low-drop-out (LDO) regulators for Flash and mobile RAM memory devices
• Voltage independent switching of two SIM cards
• LDO regulators for baseband I/O supply
• LDO regulator for analog mixed-signal section of S-GOLD
• Low-noise LDO regulators for RF devices
• Supply for Bluemoon Single, Infineon’s single chip solution for Bluetooth
• Audio amplifier 8 Ohms for handsfree operation and ringing
• Charge Control for charging Li-Ion/Polymer batteries under software control
• Pre-charge current generator with selectable current level
• RTC regulator with ultra-low quiescent current
• USB interface support for peripheral and mini-host mode
• Backlight LEDs driver with current selection and PWM dimming function
• Two single LED driver outputs for signaling
• Vibrator driver with adjustable voltage
• Fully controlable by software via I2C - Bus
• Temperature and battery voltage sensors
• Interrupt channels for peripherals
• System debug mode
• VQFN 48 package with heat sink and non-protruding leads
• Compatible with the Infineon E-GOLD+ V2 and V3
LGE Internal Use Only - 30 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
SM-POWER is a further step on the successful E-Power product line with enhanced and optimized
functionality.
SM-POWER features a baseband supply concept with a DC/DC step-down converter cascaded by two
linear regulators
- SM-POWER’s DC/DC converter makes up to 40 % reduction of battery current for smart phone
functions (e.g. organizer functions, games, MP3 decoding) possible.
- SDBB has high efficiency up to 95% and also a power save mode.
- Memory Interface is directly supported by the SDBB
- SDBB can also act as main supply voltage for E-GOLD+ or S-GOLDlite baseband devices.
- For S-GOLD two linear regulators for DSP and Core are cascaded after the SDBB.
SM-POWER supports the standby power-down concept of S-GOLD by temporarily switching off the
linear regulator for the DSP during mobile standby whenever this subsystem is not used. In this phase
the ARM controller and most peripherals including parts of the on-chip SRAM are kept powered-up
withpower being supplied by the other linear regulator.
SM-POWER includes a fully differential audio amplifier able to drive loads down to a nominal value of
8 Ohm for usage in hands-free phones and for ringing
- 450 mW maximum output power
- adjustable gain
- mute switch SM-POWER also integrates a charging function for Li-Ion, Li-Polymer batteries
- click and pop -protection SM-POWER also integrates a charging function for Li-Ion, Li-Polymer
batteries
- Precharge current source with two current levels
- Constant current / constant voltage charging with 3 different termination voltages
- Programable charge current limitation for use with different batteries
- Freely programable pulse charging to reduce the thermal power dissipation in the constant voltage
charging phase
- Top-off charge current sensing SM-POWER completes the USB interface of S-GOLD
- Regulated voltage for S-GOLD USB interface including reverse current and overvoltage protection
- Switch to supply USB pull-up resistor
- Mini-host pull down resistor functionality
- Charge pump with internal switching capacitor for USB host VBUS supply voltage SM-POWER fully
supports LED and Vibra Motor functionality
- no external components needed
- driver for backlight LEDs adjustable in steps up to 140mA and with soft turn on and off by PWM
dimming
- two driver outputs for single LEDs for precharge indication and signaling with i.e. change of colour
- driver for Vibra Motor with adjustable voltages, soft startup / shutdown and current limitation SM-
POWER offers several control functions
Copyright © 2008 LG Electronics. Inc. All right reserved. - 31 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
LGE Internal Use Only - 32 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
VCHG_VUSB
VUSB
VBAT VBAT
2V62_VIO
RESOURCE_CTRL
C201 R200
SPOWER_INT
2.2u RTC_OUT ON_OFF2
2.2u
27K
1V35_VPLL
ON_OFF2
C204 R201
SDA
C200
PWRON
VBAT
KEY_BACKLIGHT
WDOG
0.1u DNI
_PPR
2.2u
C205
VBAT 2V62_VIO VBAT
SCL
VBAT
KEY_EN
C206
4.7K
4.7K
4.7K
R206 4.7K
100u
2.2u
2.2u
1u
R207
4.7K
C209
C207
C208
R203
R204
R205
SP_INT
0.1u
TP201
R208
100K
DNI
0.1u
1u
USB_OEn TP200
C210
USB_DAT_VP
R209
C212
C211
USB_SE0_VM
KDS160E
R210 0
D200
10uH
TXON_PA
1V8_SD 2V5_VAUDB VBAT L200 1V35_CORE 2V8_CAM_A 2V7_VRF 2V85_VRF 1V5_VRF 2V9_VMME
B10
A10
A11
B11
K10
L11
C3
C4
C5
C7
C8
C9
B2
A2
B3
A3
A4
B5
B6
B7
A5
A7
A6
B8
A9
B9
B4
A1
K3
K4
K5
K6
K7
K8
K9
A8
VBAT
L1
L3
L4
L5
L6
L7
L8
L9
J4
J5
J7
J8
J9
2V5_VAUDA 2V85_VFM VBAT 1V5_VBT 2V11_RTC 2V9_SIM 2V65_VBT 1V8_SD
SE0_VM
DAT_VP
AC-
AC+
SUSPEND
OE_N
VUSB
VDD_USB
MONO_INP
MONO_INN
VDD_MONO
VREFEX_M
MONO_OUTP
VSS_MONO
MONO_OUTN
RREF
VREF
FLASH_SHINK
FLASH_ON
TXONPA
VPLL
VDDPLLIO
VIO
VSD2
PUMS3
PUMS2
PUMS1
OUTPORT
POWER_ON
WDOG
ON_OFF1
ON_OFF2
ON_OFF_OUT
RESOURCE_CRTL
I2C_INT
I2C_DAT
I2C_CLK
BL1_PWM
BL2_PWM
BL3_PWM
CH_CNTRL
CH_SOURCE
CHARGE_UC
VDD_CHARGE
SENSE_IN1
SENSE_IN2
VDD_REF
VLED
VSD1
B1
U_RCV RCV
C2
U_PMIN VPIN
D3 C11
U_VMIN VMIN VMME
C1 C10
USB_DP D+ VDDMME
D2
USB_DM D-
D10
PMRSTn VDDRF2
E3 D11
PMRSTn RESET_N VRF2
FB200
D1
RESET2_N
E2 E10
VCXO_EN SLEEP1_N VRF3
E1 E11
BT_VCXO_EN SLEEP2_N VDDRF13_AFC
F2 F10
VAUDIOA VRF1
F1 F11
VDDAUDIOA U201 VVIB
G11
PMB6821 VDDSIMVIB
G2
VDDAUDIOB
G1 G10
VAUDIOB VSIM
H2 H11
VAUX VAFC
H1
VDDAUX
H10
KDS160E
10uH
J1
2.2u 2.2u 1u SU1_GATE
J2 H9
SU1_GND VDDUMTS
H3 J11
SU1_FB VUMTS
L201
J3 FB201
SU1_ISENSE
K11
VDDSD1
K1 J10
VDDSD2 SD1_FB
K2 L10
SD2_FB SD1_FBL
L2
VSS_VREF
SD2_FBL
VSS_SD1
VSS_SD2
VSS10
VSS11
VSS12
VSS13
VSS14
VSS15
VSS16
VSS17
VSS18
VSS19
VSS20
VSS21
VSS22
VSS23
VSS24
VSS25
VSS26
VSS27
VSS28
VSS29
VSS30
C228
C229
C230
VSS1
VSS2
VSS3
VSS4
VSS5
VSS6
VSS7
VSS8
VSS9
C233
C234 C235 0.1u 10u C236 C237 C238 10u C239 C240 C241 C242 C243 C244 C245 C246 C247 C248 C249
C6
D4
D5
D6
D7
D8
E4
E5
E6
E7
E8
E9
F3
F4
F5
F6
F7
F8
F9
G3
G4
G5
G6
G7
G8
G9
H5
H6
H7
J6
D9
H8
H4
10u
10u
10u
22u 2.2u C231 2.2u 0.1u 2.2u C232 2.2u 1u 1u 1u 2.2u 2.2u 2.2u 2.2u 2.2u 2.2u 2.2u
C492 C491
10u 10u
Copyright © 2008 LG Electronics. Inc. All right reserved. - 33 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
CHARGING IC
2V11_RTC
2V62_VIO
VCHG_VUSB VBAT
R220
100K
U203 ISL6294
R221
100K
1 8
VIN BAT
2 7 360mA
_PPR _PPR IREF
3 6 50mA
_EOC _CHG IMIN
4 5
CHG_EN _EN GND
9
PGND
Current Monitor
VSUPPLY
VBAT
C256
0.1u
C257
2.2u
U205
R231
5 1
47mohm LOAD NC
2
GND
4 3
VIN IOUT LOAD
ZXCT1010E5TA C264 R232
1u 2.2K
LGE Internal Use Only - 34 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
3.3.2 Charging
SM-POWER provides together with an external p-channel FET Siliconix Si3455 an external AC-
adapter a complete charge control function for charging of Li-Ion or Li-Ion-Polymer batteries. Either a
1-cell Li-Ion or Li-Ion-Polymer battery with 4.1, 4.2 or 4.4 Volts may be used.
Copyright © 2008 LG Electronics. Inc. All right reserved. - 35 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
Input ON is a power-on input for SM-POWER with 2 active high levels (see Figure 8). It might be
triggered by a push button or by the RTCOUT output of the S-GOLD device as well. To detect if the
push-button is pressed during system operation the logical level at pin ON or its change (if Bit 1 EION
in INTCTRL2 is asserted) is recorded in bit LON of the ISF register. If the high level of voltage at pin
ON does not reach VIHdet (Vbat-0.8 ~ Vbat-0.3) the above-mentioned bit won’t be set.
To support Remote power on function for factory mass production, applied an analog switch as
following figure. As monitoring the RPWRON and Key matrix KP_OUT(2) & KP_IN(0), KF510 system
recognize whether remote power on or End-key pushed
LGE Internal Use Only - 36 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
Remote Power On
2V11_RTC
R219
100K
PWRON
R222
RPWRON_EN
3.3M
R223
3.3M
C253
2.2u
END_KEY_IN
END_KEY_IN
KEY_ROW0
3
R321 2 Q300
END_KEY
KTC4075E
10K 1
R323
100K
KEY_COL2
Copyright © 2008 LG Electronics. Inc. All right reserved. - 37 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
SIM Interface
SIM_CLK : SIM card reference clock
SIM_RST : SIM card Async /sync reset
SIM_IO : SIM card bidirectional reset
SIM CONNECTOR
2V9_SIM
S
SIM_EN G NTS2101PT1G
Q500
D
R504
10K
J500
1 6
VCC I_O
2 5
SIM_RST RST VPP
3 4
SIM_CLK CLK GND
SIM_IO
C506 C507
C508
22p 0.1u
150p
SIM CONNECTOR
2V9_SIM
S
SIM_EN G NTS2101PT1G
Q500
D
R504
10K
J500
1 6
VCC I_O
2 5
SIM_RST RST VPP
3 4
SIM_CLK CLK GND
SIM_IO
C506 C507
C508
22p 0.1u
150p
LGE Internal Use Only - 38 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
The Micro SD Memory Module has eight exposed contacts on one side. The S-Gold3 is connected
to the module using a dedicated eight-pin connector
SD mode
Pin No. Name Type Description
1 DAT2 I/O Data bit [2]
2 CD/DAT3 I/O Data bit [3]
3 CMD I/O Command response
4 VDD Power Power supply
5 CLK I Clock
6 VSS Ground Power ground
7 DAT0 I/O Data bit [0]
8 DAT1 I/O Data bit [1]
Copyright © 2008 LG Electronics. Inc. All right reserved. - 39 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
3.6 Memory
1Gbit NAND & 512Mbit DDRAM employed on KF510 with 8 & 16 bit parallel data bus thru ADD(0) ~
ADD(28). The 1Gbit NAND Flash memory with DDRAM stacked device family offers multiple high-
performance solutions.
B10
P10
N1
A2
A9
B1
P1
P2
P9
B2
B7
B9
E8
F6
ADD(16:28)
DNU1
DNU2
DNU3
DNU4
DNU5
DNU6
DNU7
DNU8
DNU9
DNU10
DNU11
NC1
NC2
NC3
NC4
NC5
ADD(0:15) C7 TP100 ADD(16)
A0
ADD(0) B3 C8 ADD(17)
DQ0 A1
ADD(1) C4 C9 ADD(18)
DQ1 A2
ADD(2) C3 B8 ADD(19)
DQ2 A3
ADD(3) D4 M9 ADD(20)
DQ3 A4
ADD(4) D3 L9 ADD(21)
DQ4 A5
ADD(5) E4 K9 ADD(22)
DQ5 A6
ADD(6) E3 J9 ADD(23)
DQ6 A7
ADD(7) F4 H7 ADD(24)
DQ7 A8
ADD(8) J4 H8 ADD(25)
DQ8 A9
ADD(9) K3 D9 ADD(26)
DQ9 A10
ADD(10) K4 H9 ADD(27)
DQ10 A11
ADD(11) L3 G7 ADD(28) 1V8_SD 1V8_SD
DQ11 A12
ADD(12) L4
DQ12
ADD(13) M3
DQ13
ADD(14) M4 B4
DQ14 VDD1
ADD(15) N3 G9
DQ15 VDD2
H2
VDD3
M2
VDD4
TP101 E9
_RAM_CS _CS
D2
VDDQ1
H4 F2
SDCLKO
G8
CLK U100 VDDQ2
K2
CKE CKE VDDQ3
F8
_WR
D7
_WED K5E1H12ACM-D075
ADD(29) BA0
D8 C2
0.1u
0.1u
0.1u
0.1u
0.1u
C125
C126
C127
C128
NC6
NC7
NC8
NC9
_CE
_CK
CLE
_RE
ALE
1V8_SD
C6
G4
D5
C5
E5
E6
D6
F5
G5
G6
H5
H6
N2
N9
TP102 R108
_NAND_CS
R109 10
SDCLKI 3300
R107
ADD(16)
10K
ADD(17)
TP103
_RD
R110 0
FCDP
TP104
_WR
LGE Internal Use Only - 40 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
1 2V85_VFM VCC
2 2V85_VFM VCC
3 LCD_ID I LCD Vendor detection
13 GND Ground
14 GND Ground
15 GND Ground
16 GND Ground
17 GND Ground
18 GND Ground
19 GND Ground
20 GND Ground
21 _DIF_RESET O Reset
Copyright © 2008 LG Electronics. Inc. All right reserved. - 41 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
27 GND Ground
28 GND Ground
30 GND Ground
LGE Internal Use Only - 42 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
AF_CAM
KEYPAD 1 4
KEY_ROW0
700 701 702
2 3
KEY_ROW1
703 704 705
KEY_ROW2
706 707 708 VOL UP
KEY_ROW3
STAR 709 SHARP VOL DOWN
KEY_ROW4
KEY_COL0
KEY_COL1
KEY_COL2
KEY_COL3
END KEY
VBAT
SPVM110200
1 2
END_KEY
3 4
ON/END
Copyright © 2008 LG Electronics. Inc. All right reserved. - 43 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
The PSoC¢‚ family consists of many Mixed-Signal Array with On-Chip Controller devices. These
devices are designed to replace multiple traditional MCU-based system components with one, low cost
single-chip programmable component. A PSoC device includes configurable blocks of analog and
digital logic, as well as programmable interconnect. This architecture allows the user to create
customized peripheral configurations, to match the requirements of each individual application.
Additionally, a fast CPU, Flash program memory, SRAM data memory, and configurable IO are
included in a range of convenient pin outs.
The PSoC architecture, as illustrated on the left, is comprised of four main areas: the Core, the System
Resources, the Digital System, and the Analog System. Configurable global bus resources allow all
the device resources to be combined into a complete custom system. Each CY8C21x34 PSoC device
includes four digital blocks and four analog blocks. Depending on the PSoC package, up to 28 general
purpose IO (GPIO) are also included. The GPIO provide access to the global digital and analog
interconnects.
3V3_TCH
FB601
TP600
Touch Debug
C604
0.01u
33
32
31
30
29
28
27
26
25
GND
VSS1
P0_3
P0_5
P0_7
VDD
P0_6
P0_4
P0_2
1 24
SEN0 P0_1 P0_0 SEN13
2 23
SEN1 P2_7 P2_6 SEN12
3 22
SEN2 P2_5 U602 P2_4 SEN11
4 21
SEN3 P2_3 CY8C20434 P2_2 SEN10
5 20
SEN4 P2_1 P2_0 SEN9
6 19
R635 DNI P3_3 P3_2 SEN8
7 18
P3_1 P3_0 SEN7
8 17
P1_7 XREX TCH_RESET
VSS2
P1_5
P1_3
P1_1
P1_0
P1_2
P1_4
P1_6
9
10
11
12
13
14
15
16
SEN5
SCL
SDA R636 1K
MICOM_INT
R637 1K
I2C_SDA_TCH
R638 1K
I2C_CLK_TCH
LGE Internal Use Only - 44 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
VBAT
LD700 LEWWS47PAZ
R700 100ohm
KEY_BACKLIGHT
R701 100ohm
LD701 LEWWS47PAZ
3V3_LED
FB600
LED(21)
LED(20)
2.2u
LED(7)
LED(8)
33
32
31
30
29
28
27
26
25
GND
VSS1
P0_3
P0_5
P0_7
VDD
P0_6
P0_4
P0_2
1 24
LED(0) P0_1 P0_0 LED(19)
2 23
LED(1) P2_7 P2_6 LED(18)
3 22
LED(2) P2_5 U601 P2_4 LED(17)
4 21
LED(3) P2_3 CY8C21434 P2_2 LED(16)
5 20
LED(4) P2_1 P2_0 LED(15)
6 19
LED(5) P3_3 P3_2 LED(14)
7 18
LED(6) P3_1 P3_0 LED(13)
8 17
SCL P1_7 XREX TCH_RESET
DNI R600
VSS2
P1_5
P1_3
P1_1
P1_0
P1_2
P1_4
P1_6
9
10
11
12
13
14
15
16
SDA
LED(9)
LED(10)
LED(11)
LED(12)
R639 1K
I2C_CLK_LED
I2C_SDA_LED
R640 1K
Copyright © 2008 LG Electronics. Inc. All right reserved. - 45 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
U302 APDS-9005-020
1 6
VCC OUT
R324 1
2 5
NC1 NC4
3 4
NC2 NC3
C324 C325
VBAT 1u 1u
C326
2.2u
5
9
6
7
C1P
C1M
C2P
C2M
C327 4.7u 10
VIN1
4
VOUT MLED
8 3
PGND1 DIN1 MLED1
2
DIN2 MLED2
1 3V3_TCH
DIN3 MLED3
20 28
VIN2 DIN4 MLED4
2V62_VIO 26 3V3_LED
DIN5
C329 U305 21 VBAT
2.2u
R327 10K 11
SM8152AB-G LDOUT1
VEN
19 1V8_CAM
LDOUT2
13
C330 SCL SCL
14 17 VBAT
0.01u SDA SDA VIN3
12
SBN_EN SBN
18 2V8_CAM
LDOUT3
24
CD
23 16
PD VIN4
G_SLUG
LMON
GND1
22 15
VREF LDOUT4
27
25
29
FB_KEY
LGE Internal Use Only - 46 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
VBAT
Figure 16 LCD Back light & LDO unit & Camera Flash
The SM8152A switches between 3 charge pump operating modes; x1 mode (VIN through mode), x1.5
mode(x1.5 charge pump boost), and x2 mode (x2 charge pump boost), reducing the total power
dissipation. These switching occurs automatically in internal circuits, and cannot be controlled by
external signals. If the LED current drops below the setting value while operating in x1 or x1.5 mode,
each LED drive circuit detects the undercurrent condition and the operating mode is automatically
switched x1 → x1.5, x1.5 → x2. This occurs even if only one LED undercurrent condition is detected
among the 5-channel LED drive circuits, thus it is recommended that LED has small VF variation to
optimize the total efficiency. In x1.5 or x2 mode operating, the SM8152A generates "a mode reset
signal" internally once every 1 second. This signal forces to switch the mode x1.5 → x1, x2 →σ x1.5.
Copyright © 2008 LG Electronics. Inc. All right reserved. - 47 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
3.11 ALC
The automatic luminance control (ALC) circuit adjusts the LED dimming by changing the LED current
automatically in response to the brightness of the surroundings. An external photodiode or similar
luminance sensor must be connected for the ALC automatic control to function. The luminance sensor
is connected to PD and must be set to increase the PD input current in response to increasing
luminance of the surroundings. In the typical application circuit in section 13, the SM8152A VREF
terminal is used and the luminance sensor photodiode is connected between PD and VREF
LGE Internal Use Only - 48 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
Current Monitor
VSUPPLY
VBAT
C256
0.1u
C257
2.2u
U205
R231
5 1
47mohm LOAD NC
2
GND
4 3
VIN IOUT LOAD
ZXCT1010E5TA C264 R232
1u 2.2K
Copyright © 2008 LG Electronics. Inc. All right reserved. - 49 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
2V62_VIO 1V8_SD
CN100
G1 G2
1 30
2 29
TRACECLK
3 28
TRACEPKT7
4 27
TRSTn TRACEPKT6
5 26
TDI TRACEPKT5
6 25
TMS TRACEPKT4
7 24
TCK TRACEPKT3
8 23
RTCK TRACEPKT2
9 22
TDO TRACEPKT1
10 21
EXTRSTn TRACEPKT0
11 20
TRIG_IN PIPESTAT2
12 19
PIPESTAT1
13 18
PIPESTAT0
14 17
TRACESYNC
15 16
G3 G4
In case of KF510 mass production, the JTAG & ETM interface connector will not be mount on board.
That is only for developing and software debugging purpose.( It will not be mounted on mass
production PCB)
LGE Internal Use Only - 50 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
3.14 Audio
KF510 Audio signal flow diagram as following diagram.
LM4910
LM49 10
SPK_OUTP
BBP_SND_R
SPK_OUTN
BBP_SND_L
Dual Audi
udio AMP
HSO_R
HSO_L
S-GO LD3
3
PMB8877
877
BL
BLUE
UECORE5_F
5_FM
AUXP FM_R
AUXP FM_L
FM Radio
R
I2S
I2
RCV_P RCV_N BT
NLAS37
3799
99B
Quad S/W
Qua /W
18 PIN
P
MULTI_PORT_2
CO
CONNECTO
SPK_RCV_N
SPK
MULTI_PORT_3
SPK_RCV_P
Copyright © 2008 LG Electronics. Inc. All right reserved. - 51 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
VBAT
AUDIO AMP
C202 C203
2.2u 0.1u
C5
C3
E2
E4
VDD
VDDLS
GND1
GND2
A3 D5
MINP LS+ SPK_OUTP
B3 B5
MINN LS- SPK_OUTN
A5
BB_SND_R RIN L216 100nH
220n C213 D1
HPL HSO_L
B4
BB_SND_L LIN U200 L210 100nH
220n C214
LM49100GR HSO_R
C485 C484
220n 220n
E1
HPR
A4
FM_SND_R BYPASS C217 C218
E3
GNDS 47p 47p
FM_SND_L
D3 D2
VDDI2C VDDHP
D4
SDA SDA
E5 A1
SCL SCL VDDCP
GNDCP
VSSHP
VSSCP
ADDR
C1N
C1P
2V85_VFM
2V62_VIO
C4
C2
C1
B1
B2
A2
100nH
C219
2.2u
MIC700 SPU0409HE5H-PB
VMIC_P
1
P
2
G1
3
MAIN_MIC_N G2
4
MAIN_MIC_P O
LGE Internal Use Only - 52 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
0 0 REMORT_INT REMORT_ADC
1 0 TXD_0 RXD_0
2V62_VIO VBAT
R326
DNI
Pin6
MON_TX
Pin7
MON_RX
C328
0.1u VBAT
U304
16
15
14
13
NLAST9431MT
COM_A
NO_A0
VCC
NC_D1
R328
10K
1 12
JACK_DETECT NC_A1 COM_D MULTI_PORT_1
2 11
C332 SAB NO_D0
3 10
120p NO_B0 SCD C
4 9 OUT
COM_C
COM_B NC_C1
NO_C0
NC_B1
Q301 B R329
GND
IN
VCHG_VUSB
RN1307
R331 R332 10K
Pin6 E
REMOTE_INT GND 10K
5
6
7
8
100K MULTI_PORT_0
Pin7
REMOTE_ADC
VUSB
VA302
4.7K R333
Pin6
USB_DP
R334 33 Pin7
USB_DM
R335 33
Copyright © 2008 LG Electronics. Inc. All right reserved. - 53 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
CHARGING IC
2V11_RTC
2V62_VIO
VCHG_VUSB VBAT
R220
100K
U203 ISL6294
R221
100K
1 8
VIN BAT
2 7 360mA
_PPR _PPR IREF
3 6 50mA
_EOC _CHG IMIN
4 5
CHG_EN _EN GND
9
PGND
LGE Internal Use Only - 54 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
Bluetooth
General Features
The BlueCore 5-FM BGA is a single chip radio and baseband IC for Bluetooth 2.4 GHz systems
including enhanced data rates (EDR) to 3Mbits/s. It includes an integrated FM receiver with stereo
audio output stage and an RDS demodulator.
With the on-chip CSR Bluetooth software stack, it provides a fully compliant Bluetooth system to
v2.0+EDR of the specification for data and voice communications.
2V62_VIO
1V5_BT_LDO
1
BLUETOOTH_CSR
R409
C490
0.01u
1
R411
BT400 BT401
L408
C444 C445 C446
100p 15p 0.1u 2.2u
L407 C454
NA DNI
G10
H10
C10
B10
G2
G9
G3
G8
C2
H1
C1
D2
C3
D3
H2
A2
A7
A6
K1
B2
B4
E2
E3
B6
F2
F3
J6
J3
VDD_PIO
VDD_FM
VDD_RADIO_1
VDD_RADIO_2
VDD_USB
VDD_PADS
VDD_CORE_1
VDD_CORE_2
VDD_LO
VDD_AUDIO
VDD_ANA
VSS_PIO
VSS_FM1_1
VSS_FM1_2
VSS_FM2
VSS_DIG
VSS_RADIO_1
VSS_RADIO_2
VSS_RADIO_3
VSS_ANA_1
VSS_ANA_2
VSS_ANA_3
VSS_ANA_4
VSS_ANA_5
VSS_ANA_6
VSS_PADS
VSS_CORE
VSS_LO
C455 C456
15p 15p
47n C457
AU_REF I2C_DATA
A3 C8
FM_SND_R A4
SPKR_R I2C_CLK
C7
FM_SND_L A5
SPKR_L
C481 220n R416 560 USB_DN
K6
C460 1000 pF FILT_EXT USB_DP
B3 J7
CLK32K C461 0.1u C9
CLK_32K UART_CTS
H6
UART_BT_RTS
K3
LO_REF UART_RTS
H5
UART_BT_CTS
C462 1000p
J2
XTAL_OUT UART_RX
K7 TP402 UART_BT_TX
BT_CLK K2
XTAL_IN UART_TX
J8 TP403 UART_BT_RX
L409 47 L410 270nH
C463 820p
FM_ANT B1
FM_P BLUECORE5-FM PCM2_CLK
D9
FM_N M400 PCM2_SYNC
C465 820p A1 D10
C466 PCM2_IN
LFB212G45BA1A220 ICVS0518150FR E10
AUX_DAC PCM2_OUT
FL401 B5 D8
4
RX_N
D1
G1
E1
RX_P PCM_CLK
H9 TP404 I2S1_CLK
VREGENABLE_H
I2S1_WA0
VREGENABLE_L
UB B1 NA RF_P PCM_SYNC
3 5 F1 J10 TP405
NC_DC G2 RF_N PCM_IN I2S1_TX
VREGOUT_H
2 6 C467 G1 K8 TP406
I2S1_RX
VREGIN_H
NC B2 PCM_OUT
VREGIN_L
SPI_MOSI
SPI_MISO
TEST_EN
1 7 H7 TP407
SPI__CS
SPI_CLK
G3
PIO_11
PIO_10
PIO_9
PIO_8
PIO_7
PIO_6
PIO_5
PIO_4
PIO_3
PIO_2
PIO_1
PIO_0
AIO_1
AIO_0
_RST
1V5_BT_LDO
8
C468
33nH
L413
15p
C6
A8
B7
C5
F10
F9
E8
E9
B9
B8
A9
A10
J4
K4
F8
J9
H8
K10
K9
C4
H3
H4
J1
J5
K5
2V65_VBT
BT_INT
TP408 C440
0.01u FB401
R414
2.2
BT_VCXO_EN
C472 C469
0.1u 100p
2V62_VIO
Copyright © 2008 LG Electronics. Inc. All right reserved. - 55 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
Bluetooth Radio
• Common TX/RX teminal simplifies external matching, eliminates external antenna switch
• No external trimming is required In production
• Bluetooth v2.0 + EDR Specification compliant
Bluetooth Transmitter
• +6 dBm RF Transmit power with level control from on-chip 6-bit DAC over a dynamic range >
30dB
• Class 2 and Class 3 support without the need for an external power amplifier or TX/RX switch.
Bluetooth Receiver
• Integrated channel filters
• Digital demodulator for improved sensitivity and co-channel rejection
• Real time digitized RSSI available on HCI interface
• Fast AGC for enhanced dynamic range
• Channel classification for AFH
Synthesiser
• Fully integrated synthesizer requires no external VCO varactor diode, resonator or loop filter
• Compatible with crystals between 7.5 and 40MHz(in multiples of 250KHz) or an external clock
Audio
• Single-ended stereo analogue output
• 16-bit 48 kHz digital audio bit stream output
Physical Interfaces
• Synchronous serial interface up to 4Mbits/s for system debugging
• UART interface with programmable baud rate up to 4Mbits/s with an optional bypass mode
• USB v1.1 interface
• I2C slave for FM
• Two audio PCM interfaces (input and output)
• Analogue stereo (output only)
LGE Internal Use Only - 56 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
AUDIO Stereo
Bl ueCor e-5 FM Drivers Ana logue
I2C
FM
RF IN
Radio
SPI
RAM UART
2.4
Processor
USB
V_BT
XTAL PMIC
PMB6821
Copyright © 2008 LG Electronics. Inc. All right reserved. - 57 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
3V3_TCH
FB601
TP600
Touch Debug
C604
0.01u
33
32
31
30
29
28
27
26
25
GND
VSS1
P0_3
P0_5
P0_7
VDD
P0_6
P0_4
P0_2
1 24
SEN0 P0_1 P0_0 SEN13
2 23
SEN1 P2_7 P2_6 SEN12
3 22
SEN2 P2_5 U602 P2_4 SEN11
4 21
SEN3 P2_3 CY8C20434 P2_2 SEN10
5 20
SEN4 P2_1 P2_0 SEN9
6 19
R635 DNI P3_3 P3_2 SEN8
7 18
P3_1 P3_0 SEN7
8 17
P1_7 XREX TCH_RESET
VSS2
P1_5
P1_3
P1_1
P1_0
P1_2
P1_4
P1_6
9
10
11
12
13
14
15
16
SEN5
SCL
SDA R636 1K
MICOM_INT
R637 1K
I2C_SDA_TCH
R638 1K
I2C_CLK_TCH
LGE Internal Use Only - 58 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
3V3_LED
FB600
LED(21)
LED(20)
2.2u
LED(7)
LED(8)
33
32
31
30
29
28
27
26
25
GND
VSS1
P0_3
P0_5
P0_7
VDD
P0_6
P0_4
P0_2
1 24
LED(0) P0_1 P0_0 LED(19)
2 23
LED(1) P2_7 P2_6 LED(18)
3 22
LED(2) P2_5 U601 P2_4 LED(17)
4 21
LED(3) P2_3 CY8C21434 P2_2 LED(16)
5 20
LED(4) P2_1 P2_0 LED(15)
6 19
LED(5) P3_3 P3_2 LED(14)
7 18
LED(6) P3_1 P3_0 LED(13)
8 17
SCL P1_7 XREX TCH_RESET
DNI R600
VSS2
P1_5
P1_3
P1_1
P1_0
P1_2
P1_4
P1_6
9
10
11
12
13
14
15
16
SDA
LED(9)
LED(10)
LED(11)
LED(12)
R639 1K
I2C_CLK_LED
I2C_SDA_LED
R640 1K
Copyright © 2008 LG Electronics. Inc. All right reserved. - 59 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
LGE Internal Use Only - 60 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
R300
USB_POWER
DNI
U300 NCP348MTR2G
1 10 R301
9
100K
IN2 GATE_OUT
5 8 VCHG_VUSB
IN3 GATE
3 7
_FLAG OUT2
2V62_VIO C473
2 6
1u GND OUT1
2V5_VAUDB 11
10u
NC1
12
NC2
C300
U301 R303
NCS2200SQ2T2G 1M
FL302
5 4 VIN-
R304 1 VCC LL1608-FSL33NJ
HOOK_DETECT OUT GND 3 VIN+
47
2 V_CHAR
R305
C302
220K
120p
R309 2V5_VAUDB
2V62_VIO
1.5K
C482
47p C304 24p FM_ANT
C303 VSUPPLY
27p
HS_MIC_N L300
C305 100nH
10K
10K
DNI
DNI
C307 DNI L301 100nH ICVS0518270FR
22n R313 2.2K
10p C309 C306
HS_MIC_P R350 18
R314
R310
R311
R312
C308 19
C312 22n 1
27p C313
FB301 2
10u
3
JACK_TYPE
R316 DNI 4
5
6
MULTI_PORT_0
7
MULTI_PORT_1
R317 47 8
JACK_DETECT
9
FB302 10
11
RPWRON_EN
12
13
R318 47 14
DSR
15
16
UART_TX
R319 47 17
UART_RX
R320 47 FL305 FL306 18
EVSC5S04F050 EVSC5S04F050
P5 5
P4 4
P5 5
P4 4
R351 18
20
P6 P6
1u
1u
6 6
L304 C483
P3 3 P3 3 CN301
HSO_L 47p
C318
C319
1 P1
2 P2
1 P1
2 P2
1000 C320
82p
C321 24p
L306 100nH
L307
HSO_R
1000
C323
82p
Copyright © 2008 LG Electronics. Inc. All right reserved. - 61 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
BB Part RF Part
RF2.8
PMB887 FEM(LSHS-C085FB
26MHz_MCL
PMB6272(SMARTi LN
(S-GOLD3
I/I
SAW
T
Q/Q 900MH
TXON_P
PA
PA_BAND / R Switc
Cont ro
Hardwar PA_LEVEL 1800MH
MOD
AD R
ANT_SW
1900MH
GS
ANT_SW
Timer
/ VC
RF_E 3-Wir Sigma-Delt Deco de
RF Bu Modul ato VC
Uni RF_D
inte rfac
RF_CL
VCTCX PG T
VBAT AF 26MH Fracti ona
N-PL
2.85 Pola T
Mod ulato
PMB682
BT_CL 3.8GH
(SM-Power Loo p
26MHz_MCL SKY7734
VSUPPL
TXON_
RF1.5 RF2.85 RF1.5 A
PA_LEVEL
RF2.85 PA_BAND
MOD
LGE Internal Use Only - 62 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
Copyright © 2008 LG Electronics. Inc. All right reserved. - 63 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
GND16 GND6
36 SKY77340 17
C407 C408
DNI DNI GSM_OUT EN
9 8
GND5 GSM_IN
10 7
GND4 VRAMP
11 6
RSVD2 VBATT
GSM850 GSM900 DCS1800 PCS1900 12 5
GND3 RSVD1
13 4
2V85_VRF 2V85_VRF C480 GND2 BS
1V5_VRF 22p 14 3
GND1 DCS_PCS_IN
15 2
C414 C415 C416 DCS_PCS_OUT MODE
C417 C418 C419 C420 C421 16 1
2.5p 2.5p 2.2p C409 C410
2.2p 2.2p 2.2p 1.5p 1.5p
DNI 0.5p
C422 C423
0.1u 4.7n C424 C425 C411 C426 C427
L404 L405 68u
L403 L406 0.1u 1u 27p 100p
2V85_VRF 2V85_VRF
1V5_VRF
0.1u
FE1
VDDBIAS2V8
RX1X
RX1
RX2X
RX2
GND2
RX3X
RX3
RX4X
RX4
VDDLNA1V5
FE2
33
VBIAS VBIAS
34
VDDTX1V5 VDDRX2V8
35 20 C434
LBAND_PAM_IN TX1 U402 VDDRX1V5
36 19 R406 47n
HBAND_PAM_IN TX2 PMB6272 VCO_RC
37 18 820
VDDTX2V8 VDDVCO2V8
38 17
VDDMIX2V8 EN RF_EN
39 16
C438 C439 R407 GND3 VDDXO2V8 C437
VDDDIG2V8
VDDDIG1V5
10 40 15
0.1u 0.1u FSYS1 26MHZ_MCLK
14
GND4 GND1 1000 pF
FSYS3
FSYS2
41 13 2V85_VRF
XOX
CLK
XO
DA
AX
BX
A
B
1
2
3
4
5
6
7
8
9
10
11
12
1V5_VRF 2V85_VRF
R410
10
C441 R412
1000p X400
3 1 10K
R413 OUT VCONT AFC
C442
4 2
10 VCC GND 0.01u
C450 C451 C452 C453
26MHz
220n 0.1u 0.1u 1u
BT_CLK
RF_CLK
RF_DA
QX
IX
LGE Internal Use Only - 64 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
The constant gain direct conversion receiver contains all active circuits for a complete receiver chain
for GSM/GPRS/EDGE (see Figure 33). The GSM850/900/DCS1800/ PCS1900 LNAs with balanced
inputs are fully integrated. No inter-stage filtering is needed. The orthogonal LO signals are generated
by a divider-by-four for GSM850/900 band and a divider-by-two for the DCS1800/PCS1900 band.
Down conversion to baseband domain is performed by low/high band quadrature direct down
conversion mixers. The baseband chain contains a LNB (low noise buffer), channel filter, output buffer
and DC-offset compensation. The 3rd order low pass filter is fully integrated and provides sufficient
suppression of blocking signals as well as adjacent channel interferers and avoids anti-aliasing
through the baseband ADC. The receive path is fully differential to suppress on-chip interferences.
Several gain steps are implemented to cope with the dynamic range of the input signals. Depending
on the baseband ADC dynamic range, single- or multiple gain step switching schemes are applicable.
Furthermore an automatic DC-offset compensation can be used (depending on the gain setting) to
reduce the DC-offset at baseband-output. A programmable gain correction can be applied to correct
for front end- and receiver gain tolerances.
Copyright © 2008 LG Electronics. Inc. All right reserved. - 65 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
LGE Internal Use Only - 66 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
3.23 RF synthesizer
The transceiver contains a fractional-N sigma-delta synthesizer for the frequency synthesis in the RX
operation mode. For TX operation mode the fractional-N sigma-delta synthesizer is used as Sigma-
Delta modulation loop to process the phase/frequency signal. The 26MHz reference signal is provided
by the internal crystal oscillator. This frequency serves as comparison frequency of the phase detector
and as clock frequency for all digital circuitry.The divider in the feedback path of the synthesizer is
carried out as a multi-modulus divider (MMD). The loop filter is fully integrated and the loop bandwidth
is about 100 kHz to allow the transfer of the phase modulation. The loop bandwidth is automatically
adjusted prior to each slot (OLGA©˜). To overcome the statistical spread of the loop filter element
values an automatic loop filter adjustment (ALFA) is performed before each synthesizer startup. The
fully integrated quad-band VCO is designed for the four GSM bands (850, 900, 1800, 1900 MHz) and
operates at double or four times transmit or receive frequency. To cover the wide frequency range the
VCO is automatically aligned by a binary automatic band selection (BABS) before each synthesizer
startup.
3.24 VCTCXO
The VCTCXO (X400) supply 26MHz reference clock and controlled by AFC input to generate a strict
system clock. The 26MHz clock is used to Transceiver(U402), Bluetooth chip(M400) and S-Gold3
(U101).
14
GND1
13 2V85_VRF
XOX
XO
11
12
R410
10
C441 R412
1000p X400
3 1 10K
OUT VCONT AFC
C442
4 2
VCC GND 0.01u
C452 C453
26MHz
0.1u 1u
Copyright © 2008 LG Electronics. Inc. All right reserved. - 67 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
VDD ON ON ON ON ON ON
GSM850 / 900_TX H L
CN410
1 GSM 1800 / 1900_ TX L H
GSM850 / 900_RX L L
C400
GSM 1800 / 1900_ RX L L
1000p
R400
100ohm Y2 A2 FE1
VCC GND
R401
ANT400 100ohm Y1 A1 FE2
C401 C402
100p 100p
NC7WV16P6X U400
19
20
21
10
12
13
14
16
18
22
23
24
9
LSHS-C085FB
VC1
VC2
NC
GND1
GND2
GND3
GND4
GND5
GND6
GND7
GND8
GND9
GND10
GND400
FL400
C474
100p C403
12p
GSM1800_1900_TX
GSM1800RX_OUT1
GSM1800RX_OUT2
GSM1900RX_OUT1
GSM1900RX_OUT2
C475 22p
GSM850RX_OUT1
GSM850RX_OUT2
GSM900RX_OUT1
GSM900RX_OUT2
GSM850_900_TX
G2
ANT RF
G1
GND25 GND
SW400 27
GND24 GND
RF-650 28
L412 GND23 GND
29
ANT
15
17
1
2
3
4
5
6
7
8
C406 32
GND19 GN
0 33
GND18 GN
34
GND17 GN
35 U401
GND16 GN
SKY77340
LGE Internal Use Only - 68 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
3 BS Band Select
4 REVD1 Reserved
5 VBATT DC Supply
12 REVD2 Reserved
Copyright © 2008 LG Electronics. Inc. All right reserved. - 69 - LGE Internal Use Only
Only for training and service purposes
3. TECHNICAL BRIEF
EDGE High Ramp Burst Control Vramp sets PA bias condition, High
fixed gain PA
MODE circuitry selects GMSK modulation (logic 0) or EDGE modulation (logic 1).
VRAMP controls the output power for GMSK modulation and provides bias optimization for EDGE
modulation depending on the state of MODE control.
GND25 GND15
27 26
GND24 GND14
28 25
GND23 GND13
29 24
GND22 GND12
30 23
GND21 GND11
31 22
GND20 GND10
C406 32 21 VSUPPLY
GND19 GND9
0 33 20
GND18 GND8
34 19
GND17 GND7
35
GND16
U401 GND6
18
36 SKY77340 17
C407 C408
DNI DNI GSM_OUT EN TXON_PA
9 8
GND5 GSM_IN LBAND_PAM_IN
10 7
GND4 VRAMP PA_LEVEL
11 6 R404 1.2K
RSVD2 VBATT 1 R405
12 5
GND3 RSVD1 VBIAS
13 4
C480 GND2 BS PA_BAND
22p 14 3
GND1 DCS_PCS_IN HBAND_PAM_IN
15 2
DCS_PCS_OUT MODE PA_MODE
16 1
C409 C410
DNI 0.5p
LGE Internal Use Only - 70 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
4. PCB layout
4. PCB layout
Copyright © 2008 LG Electronics. Inc. All right reserved. - 71 - LGE Internal Use Only
Only for training and service purposes
4. PCB layout
LGE Internal Use Only - 72 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
4. PCB layout
Camera CONN
RF S/W
RF S/W
Back up
battery FEM.
OVP IC.
Transciever.
Audio Amp
26M X-tal
Photo Sensor
BT & Radio IC
18pin Conn
32M X-tal
PMIC
Memory
Main IC
Touch to Main
Conn
Copyright © 2008 LG Electronics. Inc. All right reserved. - 73 - LGE Internal Use Only
Only for training and service purposes
4. PCB layout
Speaker &
ANT Vibrator Receiver
Camera
Flash
Sub FPCB
Volume up key
Camera key
MIC
Volume Up
Sub to key
Conn
Key FPCB
Hall IC
Main to touch
Conn
Main to touch
Conn
Touch IC
Touch to LCD
Conn
Microphone
LGE Internal Use Only - 74 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
5. Trouble shooting
Equipment setup
Power on all of test equipment
- Connect PIF-UNION JIG or dummy battery to the DUT for power up.
- Connect mobile switch cable between Communication test set and DUT when you need to make a
phone call.
- Follow trouble shooting procedure
Copyright © 2008 LG Electronics. Inc. All right reserved. - 75 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
TP1
U204
TP2
Remote Power On
2V11_RTC
If Power On Key is pressed,
TP1 TP1 is low
R219
100K
PWRON
R222
RPWRON_EN
3.3M
R223
3.3M
C253
2.2u
END_KEY_IN
EXTERNAL RESET
2V62_VIO 2V11_RTC
100K
EXTRSTn 7 A1 VCC 8
SPOWER_INT 6 B1 Y1 1 PM_INT
_RESET 5 Y2 B2 2 PMRSTn
4 GND A2 3
C263
U204 0.1u
TP2 NC7WZ08L8X
LGE Internal Use Only - 76 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
VUSB
VBAT VBAT
VCHG_VUSB
All outputs on U201 have to
operate properly.
2V62_VIO
RESOURCE_CTRL
C201 R200
SPOWER_INT
2.2u RTC_OUT ON_OFF2
2.2u
27K
1V35_VPLL
Check TP3.
ON_OFF2
C204 R201
SDA
C200
PWRON
VBAT
KEY_BACKLIGHT
WDOG
0.1u DNI
_PPR
2.2u
C205
VBAT 2V62_VIO VBAT
SCL
VBAT
KEY_EN
C206
4.7K
4.7K
4.7K
R206 4.7K
100u
2.2u
2.2u
1u
R207
4.7K
TP3 TP3
C209
C207
C208
R203
R204
R205
SP_INT
0.1u
TP201
R208
100K
DNI
0.1u
1u
USB_OEn TP200
C210
USB_DAT_VP
R209
C212
C211
USB_SE0_VM
KDS160E
R210 0
D200
10uH
TXON_PA
1V8_SD 2V5_VAUDB VBAT L200 1V35_CORE 2V8_CAM_A 2V7_VRF 2V85_VRF 1V5_VRF 2V9_VMME
B10
A10
A11
B11
K10
L11
C3
C4
C5
C7
C8
C9
B2
A2
B3
A3
A4
B5
B6
B7
A5
A7
A6
B8
A9
B9
B4
A1
K3
K4
K5
K6
K7
K8
K9
A8
VBAT
L1
L3
L4
L5
L6
L7
L8
L9
J4
J5
J7
J8
J9
2V5_VAUDA 2V85_VFM VBAT 1V5_VBT 2V11_RTC 2V9_SIM 2V65_VBT 1V8_SD
SE0_VM
DAT_VP
AC-
AC+
SUSPEND
OE_N
VUSB
VDD_USB
MONO_INP
MONO_INN
VDD_MONO
VREFEX_M
MONO_OUTP
VSS_MONO
MONO_OUTN
RREF
VREF
FLASH_SHINK
FLASH_ON
TXONPA
VPLL
VDDPLLIO
VIO
VSD2
PUMS3
PUMS2
PUMS1
OUTPORT
POWER_ON
WDOG
ON_OFF1
ON_OFF2
ON_OFF_OUT
RESOURCE_CRTL
I2C_INT
I2C_DAT
I2C_CLK
BL1_PWM
BL2_PWM
BL3_PWM
CH_CNTRL
CH_SOURCE
CHARGE_UC
VDD_CHARGE
SENSE_IN1
SENSE_IN2
VDD_REF
VLED
VSD1
B1
U_RCV RCV
C2
U_PMIN VPIN
D3 C11
U_VMIN VMIN VMME
C1 C10
USB_DP D+ VDDMME
D2
USB_DM D-
D10
PMRSTn VDDRF2
E3 D11
PMRSTn RESET_N VRF2
FB200
D1
RESET2_N
E2 E10
VCXO_EN SLEEP1_N VRF3
E1 E11
BT_VCXO_EN SLEEP2_N VDDRF13_AFC
F2 F10
VAUDIOA VRF1
F1 F11
G2
G1
VDDAUDIOA
VDDAUDIOB
U201 U201
PMB6821
VVIB
VDDSIMVIB
G11
G10
VAUDIOB VSIM
H2 H11
VAUX VAFC
H1
VDDAUX
H10
KDS160E
10uH
J1
2.2u 2.2u 1u SU1_GATE
J2 H9
SU1_GND VDDUMTS
H3 J11
SU1_FB VUMTS
L201
J3 FB201
SU1_ISENSE
K11
VDDSD1
K1 J10
VDDSD2 SD1_FB
K2 L10
SD2_FB SD1_FBL
L2
VSS_VREF
SD2_FBL
VSS_SD1
VSS_SD2
VSS10
VSS11
VSS12
VSS13
VSS14
VSS15
VSS16
VSS17
VSS18
VSS19
VSS20
VSS21
VSS22
VSS23
VSS24
VSS25
VSS26
VSS27
VSS28
VSS29
VSS30
C228
C229
C230
VSS1
VSS2
VSS3
VSS4
VSS5
VSS6
VSS7
VSS8
VSS9
C233
C234 C235 0.1u 10u C236 C237 C238 10u C239 C240 C241 C242 C243 C244 C245 C246 C247 C248 C249
C6
D4
D5
D6
D7
D8
E4
E5
E6
E7
E8
E9
F3
F4
F5
F6
F7
F8
F9
G3
G4
G5
G6
G7
G8
G9
H5
H6
H7
J6
D9
H8
H4
10u
10u
10u
22u 2.2u C231 2.2u 0.1u 2.2u C232 2.2u 1u 1u 1u 2.2u 2.2u 2.2u 2.2u 2.2u 2.2u 2.2u
C492 C491
10u 10u
1V8_SD
TP3
2V85_VFM
1V5_VBT 2V5_VAUD
2V11_RTC
2V7_VRF
2V9_SIM U201
2V8_CAM_A
TP3 2V85_VRF
2V65_VBT
1V5_VRF
1V8_SD
2V9_VMME
2V62_VIO
1V35_VPLL
Copyright © 2008 LG Electronics. Inc. All right reserved. - 77 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
TP4
LGE Internal Use Only - 78 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
START
Conne ct pow er
supp ly to the DUT
Vbat = over 3.35V
Yes
No Check t he
ìP WRONî sig nal is
lo w? RPWRON lin e or
Check 3 pin o f Q201 repla ce Q201
Yes
No
ì _RESETî sign al is Check solder
high?
Check 5 pin of U208
U204 or replac e it
Yes
No
Check th e all LDOí s
Chec k so lder
output U201 or repla ce it
Is it correc t?
Yes
Copyright © 2008 LG Electronics. Inc. All right reserved. - 79 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
LGE Internal Use Only - 80 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
CN301
TP1
U203
TP3 TP2
2V11_RTC
2V62_VIO TP5 TP4
VCHG_VUSB VBAT
R220
100K
U203 ISL6294
R221
100K
1 8
VIN BAT
2 7 360mA
_PPR _PPR IREF
3 6 50mA
_EOC _CHG IMIN
4 5
CHG_EN _EN GND
9
PGND
Copyright © 2008 LG Electronics. Inc. All right reserved. - 81 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
START
No
18pin IO(CN301) Resolde r th e
Is so ld ered ? CN301
Yes
The TA can be
No br oke n
Sourc e pi n (1)
of U20 3 = Chang e othe r TA
4.8V ? then retest
Yes
No Chec k so lder
Outp ut pin ( 8)
U203 or repla ce it
of U203 =4.2V?
Yes
No Wait ing until
Bat tery v oltage battery
is o ver 3.4V? Voltage goe s up
to 3.4V
Yes
No
Batte ry therm istor
Chan ge the
val ue
is over 10K? Battery
ret est
Yes
LGE Internal Use Only - 82 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
LCD CONNECTOR
2V85_VFM
LCD_ID TP1
CN601
TP3 1
2
17
3
4
PGND
R633
R634
100K
100K
20
10
5
21
G1
G2
22
_DIF_WR INOUT_A4 INOUT_B4 23
4 6
DIF_D8 INOUT_A3 INOUT_B3 24
3 7
_DIF_CS1 INOUT_A2 INOUT_B2 25
2 8
DIF_CD INOUT_A1 INOUT_B1 26
1 9
27
ICVE10184E150R101FR 28
FL601 29
DIF_VSYNC 30 C612
31 0.1u
MLED4 32
MLED3 33
MLED2 34
MLED1 35
MLED
TP2
Check st at us on LCD
TP1
TP3
Copyright © 2008 LG Electronics. Inc. All right reserved. - 83 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
START
No
Is LCD FPCB Replace L CD FPCB
no rm al?
Yes
Yes
Asse mb le
LGE Internal Use Only - 84 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
3M Camera Sensor
2V8_CAM_A
R302 EVLC18S02003
CIF_PCLK
FLASH_LED_EN
10
VA300
5
24
G1
G2
INOUT_A4 INOUT_B4 CIF_D0
4 6
INOUT_A3 INOUT_B3 CIF_D1
FL301 ICVE21184E150R101FR 3 7
INOUT_A2 INOUT_B2 CIF_D2
1 9 1V8_CAM 2 8
INOUT_A1 INOUT_B1 INOUT_A1 INOUT_B1 CIF_D3
2 8 1 9
CIF_RESET
FB300
INOUT_A2 INOUT_B2
CIF_SDA
CIF_SCL
3
4
INOUT_A3 INOUT_B3
INOUT_A4 INOUT_B4
7
6 TP1 FL300 ICVE21184E150R101FR
G1
G2
CN300
G1 G2
10
5
10
5
1 34 C301 0.1u
G1
G2
2 33
INOUT_A4 INOUT_B4 CIF_D4
3 32 4 6
INOUT_A3 INOUT_B3 CIF_D5
4 31 3 7
INOUT_A2 INOUT_B2 CIF_D6
5 30 2 8
INOUT_A1 INOUT_B1 CIF_D7
6 29 1 9
7 28 FL303 ICVE21184E150R101FR
10
ICVE21184E150R101FR 8 27
5
9 26
G1
G2
10 25
CIF_PD INOUT_A4 INOUT_B4
4 6 11 24
INOUT_A3 INOUT_B3
3 7 12 23
CIF_VSYNC INOUT_A2 INOUT_B2 CIF_VS
2 8 13 22
CIF_HSYNC INOUT_A1 INOUT_B1 CIF_HS
1 9 14 21
CIF_CIN
FL304 C311 15 20
CIF_CIN
0.1u 16 19
R315 EVLC18S02003 CIF_VS
17 18
CIF_MCLK CIF_HS
24 VA301
G3 G4
2V8_CAM
EMI/ESD Filter
TP1
TP2
CN203
Copyright © 2008 LG Electronics. Inc. All right reserved. - 85 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
START
Yes
Replac e New No
Camer a module Replac e
Work ing p roperly? Main
PCB
Yes
Yes
As semble
LGE Internal Use Only - 86 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
TP3
U303
VBAT
AUDIO AMP
C202 C203
2.2u 0.1u
TP2
C5
C3
E2
E4
VDD
VDDLS
GND1
GND2
A3 D5
MINP LS+ SPK_OUTP
B3 B5
MINN LS- SPK_OUTN
A5
BB_SND_R RIN L216 100nH
220n C213 D1
HPL HSO_L
B4
BB_SND_L LIN U200 L210 100nH
220n C214
LM49100GR HSO_R
C485 C484
220n 220n
E1
HPR
A4
FM_SND_R BYPASS C217 C218
E3
GNDS 47p 47p
FM_SND_L
D3 D2
VDDI2C VDDHP
D4
SDA SDA
E5 A1
SCL SCL VDDCP
GNDCP
VSSHP
VSSCP
ADDR
C1N
C1P
2V85_VFM
2V62_VIO
C4
C2
C1
B1
B2
A2
100nH
C219
2.2u
Copyright © 2008 LG Electronics. Inc. All right reserved. - 87 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
MULTI-PORT SWITCH 2
VBAT
C331 TP3
1u
U303
NLAS5223BMNR2G
1 10
VCC NO2 SPK_OUTN
2 9
SPK_OUTP NO1 COM2 SPK_RCV_N
3 8
SPK_RCV_P COM1 IN2
GND
4 7
SPK_RCV_SEL IN1 NC2 EAR_N
6
5
EAR_P NC1
H/L
L HSO_L HSO_R HEADSET
LGE Internal Use Only - 88 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
START
Yes
Inp ut Si gnal i s Replac e Main Board
always lo w?(mp3)
No
No
No
As semble
Copyright © 2008 LG Electronics. Inc. All right reserved. - 89 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
MAIN MIC
C135 C136
22n 22n
C138
C139
15p
15p
TP2
L100 L101 L102 L103
MIC700 SPU0409HE5H-PB 100nH 100nH 100nH 100nH
VMIC_P
1
P
2
G1
3
MAIN_MIC_N
MAIN_MIC_P
4
G2
O
TP4
MAIN_MIC_N
MAIN_MIC_P
HS_MIC_N
HS_MIC_P
TP1 L101
L100 TP4
MIC 700
TP3
LGE Internal Use Only - 90 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
START
Yes
Yes
As semble
Copyright © 2008 LG Electronics. Inc. All right reserved. - 91 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
1
U202 R1114D311D
VDD VOUT
3
TP2 R500 110K
1u
4 2
TP3
R215
5.1K
NC GND1
6 5
R216
VIB_EN CE GND2
C250
1K
910
C1 B2
L501 OUT501 --
BYPASS GND 100nH
Q200 C OUT
B C501 C502 C503 C504
VIB_PWM IN 1u 22p 22p
0.1u
E GND
KRC402E
R503 100K
TP1 U202
U500
LGE Internal Use Only - 92 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
START
PinA3 of U500 is
No Check U202 or
hi gh? rep lace it
Yes
Yes
Replace Vibr ator
Asse mb le
Copyright © 2008 LG Electronics. Inc. All right reserved. - 93 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
VBAT
KEY BACKLIGHT 1
CN700
20
VMIC_P KEY_BACKLIGHT
2 19
KEY_COL0
3 18
VBAT KEY_ROW0 KEY_COL1
TP1 4 17
KEY_ROW1 KEY_COL2
5 16
KEY_ROW2 KEY_COL3
LD700 LEWWS47PAZ 6 15
KEY_ROW3 BAT_ID
R700 100ohm 7 14
KEY_BACKLIGHT
KEY_ROW4 END_KEY
R701 100ohm 8 13
LD701 LEWWS47PAZ
9 12
MAIN_MIC_P
10 11
MAIN_MIC_N
TP2
2V62_VIO 2V9_VMME VBAT 2V9_SIM
2 43
VIB_IN- CN500
3 42 3V1_VIB
VIB_IN+
1 G1 G2 44
4 41
MMC_DETECT KEY_BACKLIGHT
2 43
5 40
VIB_IN-
MMC_D(0) KEY_COL0
3 42
6 39
VIB_IN+
MMC_D(1) KEY_COL1
4 41
7 38 MMC_DETECT KEY_BACKLIGHT
MMC_D(2) KEY_COL2 5 40
8 37 MMC_D(0) KEY_COL0
MMC_D(3) KEY_COL3 6 39
9 36 MMC_D(1) KEY_COL1
MMC_CLK BAT_ID 7 38
10 35 MMC_D(2) KEY_COL2
END_KEY 8 37
11 34 MMC_D(3) KEY_COL3
SIM_EN 9 36
12 33 MMC_CLK BAT_ID
KEY_ROW0 SIM_IO 10 35
13 32 END_KEY
KEY_ROW1 SIM_RST 11 34
14 31 SIM_EN
KEY_ROW2 SIM_CLK 12 33
15 30 KEY_ROW0 SIM_IO
KEY_ROW3 SPK_RCV_N 13 32
16 29 KEY_ROW1 SIM_RST
KEY_ROW4 SPK_RCV_P 14 31
KEY_ROW2 SIM_CLK
17 28
FLASH_LED_EN MMC_CMD 15 30
KEY_ROW3 SPK_RCV_N
18 27
16 29
FLASH_LED_TORCH
KEY_ROW4 SPK_RCV_P
19 26
17 28
FLASH_LED_EN MMC_CMD
20 25
18 27
FLASH_LED_TORCH
21 24 VMIC_P 19 26
MAIN_MIC_P
22 23 20 25
MAIN_MIC_N
G3 G4 21 24
MAIN_MIC_P VMIC_P
C259 C258 C260 C261 C262
22 23
0.1u 0.1u 0.1u 0.1u 0.1u MAIN_MIC_N
G3 G4
LGE Internal Use Only - 94 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
START
TP1
Check All o f LEDs sold er
Check TP1
Yes
CN20 0
No Replace 20pin conn.
CN700 20Pinis
(CN700)
High? Check TP3
Yes
Ye
Replac e KEY FPCB
CN500
Assemble
TP3
CN50 1
CN700
Copyright © 2008 LG Electronics. Inc. All right reserved. - 95 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
- Socket soldering
- Proper SIM is used S
SIM_EN G NTS2101PT1G
Q500
D
TP1
R504
10K
J500
1 6
VCC I_O
2 5
SIM_RST RST VPP
3 4
SIM_CLK CLK GND
SIM_IO
C506 C507
C508
22p 0.1u
150p
TP2
Pin1 on J500 /
2V9_SIM TP2
S500 J500
LGE Internal Use Only - 96 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
R505
100K
GND
C520 C521
22p 1u
TP2
Copyright © 2008 LG Electronics. Inc. All right reserved. - 97 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
START
No Resolder it
TF so cket pins
(check d ata line
are w ell soldered
TF dat 0,1,2,3)
Yes
As semble
LGE Internal Use Only - 98 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
FB601
SEN14
SEN6
TP600
TP1
Touch Debug
C604
0.01u
33
32
31
30
29
28
27
26
25
GND
VSS1
P0_3
P0_5
P0_7
VDD
P0_6
P0_4
P0_2
1 24
SEN0 P0_1 P0_0 SEN13
2 23
SEN1 P2_7 P2_6 SEN12
3 22
SEN2 P2_5 U602 P2_4 SEN11
4 21
SEN3 P2_3 CY8C20434 P2_2 SEN10
5 20
SEN4 P2_1 P2_0 SEN9
6 19
R635 DNI P3_3 P3_2 SEN8
7 18
P3_1 P3_0 SEN7
8 17
P1_7 XREX TCH_RESET
VSS2
P1_5
P1_3
P1_1
P1_0
P1_2
P1_4
P1_6
9
10
11
12
13
14
15
16
SEN5
3V3_LED SCL
SDA R636 1K
MICOM_INT
R637 1K
I2C_SDA_TCH
FB600
R638 1K
I2C_CLK_TCH
C620
2.2u
C621
2.2u
C600
TP2
LED(22)
LED(21)
LED(20)
2.2u
LED(7)
LED(8)
33
32
31
30
29
28
27
26
25
GND
VSS1
P0_3
P0_5
P0_7
VDD
P0_6
P0_4
P0_2
1 24
LED(0) P0_1 P0_0 LED(19)
2 23
LED(1) P2_7 P2_6 LED(18)
3 22
LED(2) P2_5 U601 P2_4 LED(17)
4 21
LED(3) P2_3 CY8C21434 P2_2 LED(16)
5 20
LED(4) P2_1 P2_0 LED(15)
6 19
LED(5) P3_3 P3_2 LED(14)
7 18
LED(6) P3_1 P3_0 LED(13)
8 17
SCL P1_7 XREX TCH_RESET
DNI R600
VSS2
P1_5
P1_3
P1_1
P1_0
P1_2
P1_4
P1_6
9
10
11
12
13
14
15
16
TP1
SDA
LED(9)
LED(10)
LED(11)
LED(12)
R639 1K
I2C_CLK_LED
I2C_SDA_LED
R640 1K
Copyright © 2008 LG Electronics. Inc. All right reserved. - 99 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
START TP2
U602 U601
Check Touch Signal
(If not rep lace front t ouch
panel) Ch eck TP1
No Resolder it
U601 & U602 Solder
OK? Check TP2
Yes
No Replace FPCB
FPCB i s Crack?
LGE Internal Use Only - 100 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
START
Check point
VCTCXO
Check po int
PLL Contro l
Check poin t
RX I/Q Signal
Copyright © 2008 LG Electronics. Inc. All right reserved. - 101 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
No Replace X401
Is the wavefor m
of TP2(C453) Similar to Fig.6?
X400
Yes
GND1
14
13 2V85_VRF
TP1 (C453)
XOX
XO
11
12
R410
10
C441 R412
1000p X400
3 1 10K
OUT VCONT AFC
C442
4 2
VCC GND 0.01u
C452 C453
26MHz
0.1u 1u
LGE Internal Use Only - 102 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
TP1 (RF_EN)
No Check U4 02
EN Signal(TP1) is OK ?
Yes
U402
No Chec k U402
DA(Data,TP2) is Normal ?
Yes
No Chec k U402
CLK(Cloc k,TP3) is Nor mal ?
TP1
VDDL
VDDRX2V8
20 C434
U402 VDDRX1V5
19 R406 47n
B6272 VCO_RC
18 820
VDDVCO2V8
EN
17
16
RF_EN RF_DATA(TP3)
VDDXO2V8 C437
VDDDIG1V5
15
FSYS1 26MHZ_MCLK
14
GND1 1000 pF
FSYS3
FSYS2
13 2V85_VRF
XOX
CLK
XO
DA
RF_CLK(TP2)
6
7
8
9
10
11
12
R410
10
C441
1000p X400
3 1
OUT VCONT
C442
4 2
VCC GND 0.01u
C452 C453
26MHz
0.1u 1u
BT_CLK RF_EN(TP1)
RF_CLK
RF_DA
TP2 TP3
Copyright © 2008 LG Electronics. Inc. All right reserved. - 103 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
TP4
TP1
TP2
R400
100ohm Y2 A2 FE1
VCC GND
R401
100ohm Y1 A1 FE2
C401 C402
100p 100p
NC7WV16P6X U400
19
20
21
10
12
13
14
16
18
22
23
24
9
LSHS-C085FB
VC1
VC2
NC
GND1
GND2
GND3
GND4
GND5
GND6
GND7
GND8
GND9
GND10
TP10 TP9
FL400
C403 TP3
GSM1800_1900_TX
GSM1800RX_OUT1
GSM1800RX_OUT2
GSM1900RX_OUT1
GSM1900RX_OUT2
22p
GSM850RX_OUT1
GSM850RX_OUT2
GSM900RX_OUT1
GSM900RX_OUT2
GSM850_900_TX
G2
ANT RF
G1
GND25 GND
SW400 27
GND24 GND
RF-650 28
GND23 GND
29
ANT
GND22 GND
30
GND21 GND
31
GND20 GND
11
15
17
1
2
3
4
5
6
7
8
C406 32
GND19 GN
0 33
GND18 GN
34
TP5,6,7,8
SW400
TP1_R400(VC1)
TP2_R401(VC2) TP10
TP5~8
LGE Internal Use Only - 104 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
No Replace Mobile SW
TP10 Sign al
same as TP9? (SW400)
Yes
Check NC7WV16P6X
Cont ro l Sign al is (TP3, TP4 fo r U400)
OK ?
No
Yes
Yes
EGSM RX
VC1
VC2
Copyright © 2008 LG Electronics. Inc. All right reserved. - 105 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
0.1u 0.1u
32
31
30
29
28
27
26
25
24
23
22
21
FE1
VDDBIAS2V8
RX1X
RX1
RX2X
RX2
GND2
RX3X
RX3
RX4X
RX4
VDDLNA1V5
VDDDIG1V5
40 15
FSYS1
14
GND4 GND1 PMB6272(U402)
FSYS3
FSYS2
41 13
XOX
CLK
XO
DA
AX
BX
Yes
A
B
1
2
3
4
5
6
7
8
9
10
11
12
C441
1000p
RX Part is OK.
Check B ase B and Circu it
or
Re-Download S/W and Cal
TP4(QX)
BT_CLK
RF_CLK
TP1(I) RF_DA
QX
TP3(Q)
Q
IX
TP2(IX)
U402 Q
TP1(I) TP4(QX)
TP2(IX) TP3(Q)
RX
I
LGE Internal Use Only - 106 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
Check point
VCTCXO
Check po int
PLL Contro l
Check po int
TX I/Q Signal
Check poin t
Transc eiver
Check point
PAM Control
Check
FEM & Mobil e
SW
Copyright © 2008 LG Electronics. Inc. All right reserved. - 107 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
0.1u 0.1u
32
31
30
29
28
27
26
25
24
23
22
21
FE1
VDDBIAS2V8
RX1X
RX1
RX2X
RX2
GND2
RX3X
RX3
RX4X
RX4
VDDLNA1V5
VDDDIG1V5
40 15
FSYS1
14
PMB6272(U402)
GND4 GND1
FSYS3
FSYS2
41 13
XOX
CLK
XO
DA
AX
BX
Yes
A
B
1
2
3
4
5
6
7
8
9
10
11
12
C441 TX Part is O K.
1000p
Check B ase B and Circuit
or
Re-Download S/W and Cal
TP4(QX)
BT_CLK
RF_CLK
TP1(I) RF_DA
QX
TP3(Q)
Q
IX
TP2(IX)
U402
TX
TP1(I) TP4(QX) I
TP2(IX) TP3(Q)
LGE Internal Use Only - 108 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
32
31
30
29
28
27
26
25
24
23
22
21
TP1(LBNAD_PAM_IN)
FE1
VDDBIAS2V8
RX1X
RX1
RX2X
RX2
GND2
RX3X
RX3
RX4X
RX4
VDDLNA1V5
FE2
33
VBIAS VBIAS
34
VDDTX1V5 VDDRX2V8
35 20
LBAND_PAM_IN TX1 U402 VDDRX1V5
36 19
HBAND_PAM_IN TX2 PMB6272 VCO_RC
37 18
VDDTX2V8 VDDVCO2V8
38 17
TP2(HBNAD_PAM_IN) C438 C439 R407
39
VDDMIX2V8
GND3
EN
VDDXO2V8
16
VDDDIG2V8
VDDDIG1V5
10 40 15
0.1u 0.1u FSYS1
14
GND4 GND1
FSYS3
FSYS2
41 13
XOX
CLK
XO
DA
AX
BX
A
B
1
2
3
4
5
6
7
8
9
10
11
12
1V5_VRF 2V85_VRF
C441
1000p
R413
10
C450 C451
220n 0.1u
TP1(LBNAD_PAM_IN)
TP2(HBNAD_PAM_IN)
Transceiver Output
GSMK Fixed
Copyright © 2008 LG Electronics. Inc. All right reserved. - 109 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
N Replace
Signals a re PMB6272(U402)
Norma l ?
Yes
Transceiv er is OK.
See next p age to check
PAM Con trol Circuit .
LGE Internal Use Only - 110 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
TXON_PA
LBAND_PAM_IN
PA_LEVEL
R404 1.2K
1 R405
TP2(TXON PA) VBIAS
PA_BAND
HBAND_PAM_IN
PA_MODE
TP1(PA LEVEL)
TP3(PA MODE)
26 C427 C428 C412 C429 C413
p 100p 100p 100p 820p 100p
U403
TP1(PA LEVEL)
TP2(TXON PA)
TP3(PA MODE)
Transceiver Output
Copyright © 2008 LG Electronics. Inc. All right reserved. - 111 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
N Check
Sign als are PMB8877(U102)
Normal ?
Yes
TP2
TP1 (PA LEVEL)
TP1 (PA LEVEL)
TP2
TP3 (PA
TP3 (PA
LGE Internal Use Only - 112 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Trouble shooting
VCC GND
R401
100ohm Y1 A1 FE2
C401 C402
100p 100p
NC7WV16P6X U400
19
20
21
10
12
13
14
16
18
22
23
24
9
LSHS-C085FB
VC1
VC2
NC
GND1
GND2
GND3
GND4
GND5
GND6
GND7
GND8
GND9
GND10
TP10 TP9
FL400
C403 TP3
GSM1800_1900_TX
GSM1800RX_OUT1
GSM1800RX_OUT2
GSM1900RX_OUT1
GSM1900RX_OUT2
22p
GSM850RX_OUT1
GSM850RX_OUT2
GSM900RX_OUT1
GSM900RX_OUT2
GSM850_900_TX
G2
ANT RF
G1
GND25 GND
SW400 27
GND24 GND
RF-650 28
GND23 GND
29
ANT
GND22 GND
30
GND21 GND
31
GND20 GND
11
15
17
1
2
3
4
5
6
7
8
C406 32
GND19 GN
0 33
GND18 GN
34
TP5,6,7,8
SW400
TP1_R400(VC1)
TP2_R401(VC2) TP610
VC2 Off On On
Copyright © 2008 LG Electronics. Inc. All right reserved. - 113 - LGE Internal Use Only
Only for training and service purposes
5. Trouble shooting
No Replace Mobile SW
TP6 Sig nal same
as TP6? (SW400)
Yes
Check NC7WV16P6X
Cont ro l Sign al is (TP3, TP4 fo r U400)
OK ?
No
Yes
Yes
EGSM TX
TP1(VC1)
TP2(VC2)
LGE Internal Use Only - 114 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
6. Download & S/W upgrade
Copyright © 2008 LG Electronics. Inc. All right reserved. - 115 - LGE Internal Use Only
Only for training and service purposes
6. Download & S/W upgrade
LGE Internal Use Only - 116 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
6. Download & S/W upgrade
2. Select Configuration sub menu from the main menu then you may see below window
Copyright © 2008 LG Electronics. Inc. All right reserved. - 117 - LGE Internal Use Only
Only for training and service purposes
4. Press key to select the m0 files
5. Select cmd.m0 and press open
LGE Internal Use Only - 118 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
6. Check if the ADI option is set to Hermes
7. Press OK to end Configuration
Select Rate
Copyright © 2008 LG Electronics. Inc. All right reserved. - 119 - LGE Internal Use Only
Only for training and service purposes
6 Download & S/W upgrade
LGE Internal Use Only - 120 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
7. Block Diagram
7. Block Diagram
Copyright © 2008 LG Electronics. Inc. All right reserved. - 121 - LGE Internal Use Only
Only for training and service purposes
LGE Internal Use Only - 122 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
8. CIRCUIT DIAGRAM
1 2 3 4 5 6 7 8 9 10 11 12
N10
A10
B10
P10
N1
A2
A9
B1
P1
P2
P9
B2
B7
B9
E8
F6
A A
ADD(16:28)
DNU1
DNU2
DNU3
DNU4
DNU5
DNU6
DNU7
DNU8
DNU9
DNU10
DNU11
NC1
NC2
NC3
NC4
NC5
1V8_SD 2V9_SIM 1V35_VPLL 2V5_VAUDA
ADD(0:15) C7 TP100 ADD(16)
A0
ADD(0) B3 C8 ADD(17)
DQ0 A1
TRACEPKT0
TRACEPKT1
TRACEPKT2
TRACEPKT3
TRACEPKT4
TRACEPKT5
TRACEPKT6
TRACEPKT7
ADD(3) D4 M9 ADD(20)
DQ3 A4
ADD(4) D3 L9 ADD(21)
DQ4 A5
ADD(5) E4 K9 ADD(22)
DQ5 A6
ADD(6) E3 J9 ADD(23)
0.1u
0.1u
0.1u
0.1u
0.1u
0.1u
0.1u
10n
10n
0.1u
0.1u
0.1u
0.1u
0.1u
0.1u
0.1u
0.1u
0.1u
0.1u
DQ6 A7
1u
1u
1u
1u
1u
ADD(7) F4 H7 ADD(24)
1
DQ7 A8
VREFN
ADD(8) J4 H8 ADD(25)
DQ8 A9
C100
C101
C102
C103
C104
C105
C106
C107
C108
C109
C115
C116
C117
C118
C119
C120
C121
C122
C123
C110
C111
C112
C113
C114
ADD(9) K3 D9 ADD(26)
R102
DQ9 A10
ADD(10) K4 H9 ADD(27)
DQ10 A11
ADD(11) L3 G7 ADD(28) 1V8_SD 1V8_SD
DQ11 A12
ADD(12) L4
DQ12
ADD(13) M3
DQ13
ADD(14) M4 B4
DQ14 VDD1
AA19
AA10
AA13
AA14
AA12
AA11
ADD(15) N3 G9
W10
W13
W15
W19
M11
M10
AA1
AA3
AA6
AA8
AA9
N11
N10
C17
U13
U14
N16
R17
U17
N18
N17
A19
K12
K11
K10
A16
B10
A13
K19
P15
P16
Y10
Y15
Y11
Y12
F17
T12
T16
T14
T13
T17
DQ15 VDD2
L12
L11
L10
L15
J11
J10
J17
J15
W1
M9
M8
N9
U1
H2
H1
A1
K9
K8
Y1
P1
V2
A5
B2
A7
L9
L8
L2
H2
J9
VDD3
B VDD4
M2 B
CORNER_A1
CORNER_A2
CORNER_AA1
CORNER_AA2
NC
VDD_MAIN1
VDD_MAIN2
VDD_MAIN3
VDD_MAIN4
VDD_MAIN5
VDD_MAIN6
VDD_MAIN7
VDD_MAIN8
VDD_MAIN9
VDD_MAIN10
VSS_MAIN1
VSS_MAIN2
VSS_MAIN3
VSS_MAIN4
VSS_MAIN5
VSS_MAIN6
VSS_MAIN7
VSS_MAIN8
VSS_MAIN9
VDDP_MEM_ETM1
VDDP_MEM_ETM2
VDDP_MEM_ETM3
VDDP_MEM_ETM4
VDDP_MEM_ETM5
VSSP_MEM_ETM1
VSSP_MEM_ETM2
VSSP_MEM_ETM3
VSSP_MEM_ETM4
VDDP_DIGA
VDDP_DIGB
VDDP_DIGC1
VDDP_DIGC2
VDDP_DIGD
VSSP_DIG2
VSSP_DIG1
VSSP_DIG3
VDDP_DIGE
VSSP_DIG4
VDDP_MMC
VDDP_SIM
VDD_RTC
VSS_RTC
VDD_PLL
VSS_PLL
VDD_FUSE_FS
VDDA_BB
VSSA_BB
VDDA_D
VSSA_D
VDDA_M
VSSA_M
VDDA_BG
VSSA_BG
VREFN
AGND
GUARD
VDDA_VBR1
VSSA_VBR1
VDDA_VBR2
VSSA_VBR2
VDDA_VBT
VSSA_VBT
TRACEPKT0
TRACEPKT1
TRACEPKT2
TRACEPKT3
TRACEPKT4
TRACEPKT5
TRACEPKT6
TRACEPKT7
TP101 E9
_RAM_CS _CS
D2
U8
ADD(0:26) H4
VDDQ1
F2
ADD(0)
MEM_A0
W4
SDCLKO
G8
CLK U100 VDDQ2
K2
ADD(1)
MEM_A1 CKE CKE VDDQ3
2V62_VIO VSUPPLY T8 ADD(2) F8
MEM_A2
U6
_WR
D7
_WED K5E1H12ACM-D075
ADD(3)
MEM_A3 ADD(29) BA0
W18 W5 D8 C2
0.1u
0.1u
0.1u
0.1u
0.1u
ADD(4)
BAT_ID M_0 MEM_A4 ADD(30) BA1 VSS1
V17 AA4 ADD(5) E7 F9
RF_TEMP M_1 MEM_A5 _RAS _RAS VSS2
Y19 T7 ADD(6) F7 G2
R131
R104
390K
Y18 U7 G3 N4
C124
C125
C126
C127
C128
ADD(7)
JACK_TYPE M_3 MEM_A7 _BC0 LDQM VSS4
0 R103 W17 Y5 ADD(8) H3
FB_KEY M_4 MEM_A8 _BC1 UDQM
AA18 AA5 ADD(9) E2
Y17
M_5 MEM_A9
W6
DATA(0:15) VSSQ1
J2
ADD(10)
M_6 MEM_A10 VSSQ2
W16 T9 ADD(11) DATA(0) J5 L2 1V8_SD
ICDL M_7 MEM_A11 IO0 VSSQ3
AA17 W7 ADD(12) DATA(1) L5
M_8 MEM_A12 IO1
Y16 Y6 ADD(13) DATA(2) J6
R132
100K
100K
NC10
NC11
R__B
DATA(0)
_WE
_WP
SPK_RCV_SEL T_OUT5 MEM_AD0
NC6
NC7
NC8
NC9
_CE
_CK
CLE
_RE
ALE
B13 L3 DATA(1) 1V8_SD
PA_MODE T_OUT6 MEM_AD1
C11 J3 DATA(2)
FLASH_LED_TORCH T_OUT7 MEM_AD2
C6
G4
D5
C5
E5
E6
D6
F5
G5
G6
H5
H6
N2
N9
E12 L5 DATA(3)
TCH_RESET T_OUT8 MEM_AD3 R108
C12 M3 DATA(4) TP102
I2C_SDA_TCH_LED T_OUT9 MEM_AD4 _NAND_CS
B12 N1 DATA(5) R109 10
JACK_DETECT T_OUT10 MEM_AD5 SDCLKI 3300
B15 P2 DATA(6)
R107
I2C_CLK_TCH_LED T_IN0 MEM_AD6 ADD(16)
10K
C13 N2 DATA(7)
CHG_EN T_IN1 MEM_AD7 ADD(17)
J4 DATA(8) TP103
MEM_AD8 _RD
D MEM_AD9
K4 DATA(9)
FCDP
R110 0 D
U101 MEM_AD10
MEM_AD11
K5
L4
DATA(10)
DATA(11)
_WR
TP104
R1 DATA(12)
PMB8877 MEM_AD12
MEM_AD13
M5
M4
DATA(13)
DATA(14)
MEM_AD14
D17 P4 DATA(15)
RF_EN RF_STR0 MEM_AD15
D18
RF_STR1
E15 R2
RF_DA RF_DATA MEM_CS0_N _NAND_CS
B17 P3
RF_CLK RF_CLK MEM_CS1_N _RAM_CS
N3 SC100
MEM_CS2_N
C18 N4 SC101
AFC AFC MEM_CS3_N 1 7
W12 U3
RPWRON_EN CLKOUT0 MEM_CSA0_N ADD(27) 1 11 2 8
U12 U4
26MHZ_MCLK F26M MEM_CSA1_N ADD(28) 2 12 3 9
H15 T6
SWIF_TXRX MEM_CSA2_N ADD(29) 3 13 4 10
T5
MEM_CSA3_N ADD(30) 4 14 5 11
H16
SIM_IO CC_IO 5 15 6
K18 T11
SIM_CLK CC_CLK FCDP_RBN FCDP 6 16
K17
SIM_RST CC_RST 7 17
K2
MEM_WAITN 8 18
E MMC_CMD
E10
MMCI1_CMD MEM_ADVN
M1
9 19
E
A12 L1 SC102
MMC_CLK MMCI1_CLK MEM_RDN _RD 10 20
B11 R3
MMC_D(0) MMCI1_DAT0 MEM_WRN _WR 1 8
C9
MMC_D(1) MMCI1_DAT1 2 7
F10 W3
MMC_D(2) MMCI1_DAT2 MEM_BFCLKO1 3 6
Boot Mode MMC_D(3)
A14
MMCI1_DAT3 MEM_BFCLKO2
Y3
R112 10
SDCLKI 4 5
D3 Y2
ISSP_CLK_TCH MMCI2_CMD MEM_SDCLKO SDCLKO
Large Block : R116 -> NA, R130 -> 1K SBN_EN
D2
MMCI2_DAT0 MEM_BC0_N
AA2
_BC0
F6 V3
Small Block : R116 -> 10K, R130 -> NA VIB_EN
W11
MMCI2_CLK MEM_BC1_N
U5
_BC1
FWP MEM_BC2_N LDQS
Y4
MEM_BC3_N UDQS
F2
USB_OEn IRDA_TX
G2 Y7
SLIDE_DETECT IRDA_RX MEM_RAS_N _RAS
2V62_VIO 2V62_VIO W8
MEM_CAS_N _CAS
A18 U10
TDO
TDI
B18
C15
TDO
TDI
MEM_CKE
AA16
CKE
32.768KHz
ON BOARD ARM9 JTAG & ETM INTERFACE
TMS TMS F32K
C16 AA15 2 1
1K
R130
F13 W14
TRSTn TRST_N RESET_N _RESET X100
F16 H18
RTCK RTCK RSTOUT_N C133 C134
R113
F RTC_OUT
Y14
RTC_OUT 15p 15p
2V62_VIO 1V8_SD F
E14 R16
TRIG_IN TRIG_IN VREFP VREFN
B16 R15 C132 220n
MON1 IREF
C10
MON2
AA7 J18
R115
TRACESYNC TRACESYNC SPCU_RQ_IN0
22K
U11 J19 CN100
R116
R114
10K
Y9 H17 G1 G2
PIPESTAT2 PIPESTAT2 SPCU_RC_OUT0
T10 G18 1 30
USIF1_RXD_MRST
USIF2_RXD_MRST
USIF3_RXD_MRST
USIF1_TXD_MTSR
USIF2_TXD_MTSR
USIF3_TXD_MTSR
PIPESTAT1 PIPESTAT1 SPCU_RQ_IN2
Y8 2 29
PIPESTAT0 PIPESTAT0 TRACECLK
3 28
USIF1_RTS_N
USIF1_CTS_N
USIF2_RTS_N
USIF2_CTS_N
DIF_RESET1
DIF_RESET2
TRACEPKT7
USIF3_SCLK
CIF_HSYNC
CIF_VSYNC
CIF_RESET
4 27
I2S1_CLK0
I2S1_CLK1
I2S2_CLK0
I2S2_CLK1
CIF_PCLK
I2S1_WA0
I2S2_WA0
I2S2_WA1
I2C1_SDA
I2C2_SDA
DSPOUT1
TRSTn TRACEPKT6
CLKOUT2
I2C1_SCL
I2C2_SCL
KP_OUT0
KP_OUT1
KP_OUT2
KP_OUT3
AUXGND
DIF_CS1
DIF_CS2
5 26
I2S1_RX
I2S2_RX
EPREF1
EPREF2
I2S1_TX
I2S2_TX
DIF_WR
EPPA11
EPPA12
EPPA21
EPPA22
PM_INT
DIF_CD
DIF_RD
DIF_HD
DSPIN0
DSPIN1
DIF_VD
CIF_PD
DIF_D0
DIF_D1
DIF_D2
DIF_D3
DIF_D4
DIF_D5
DIF_D6
DIF_D7
DIF_D8
CIF_D0
CIF_D1
CIF_D2
CIF_D3
CIF_D4
CIF_D5
CIF_D6
CIF_D7
KP_IN0
KP_IN1
KP_IN2
KP_IN3
KP_IN4
KP_IN5
KP_IN6
AUXN1
AUXN2
TDI TRACEPKT5
AUXP1
AUXP2
VMICN
EPN11
EPN12
VMICP
EPP11
EPP12
MICN1
MICN2
MICP1
MICP2
6 25
TMS TRACEPKT4
7 24
TCK TRACEPKT3
8 23
RTCK TRACEPKT2
F7
C6
B5
E7
A3
A2
B3
B4
C2
C1
E5
C5
C3
B1
C4
D1
F8
C7
F9
A11
A9
C8
B8
B9
A8
E8
B7
E9
A4
B6
A6
A10
680 G1
J5
H3
H5
J2
J1
K3
G4
G3
F1
G5
P17
P18
R18
R19
T18
T19
U18
U19
V18
V19
N19
P19
M18
M17
L17
M19
L19
L18
L16
T15
U16
E16
D19
E18
E17
B19
G19
G15
F18
E19
F19
G17
C14
A17
Y13
C19
F15
F5
F3
E1
F4
H19
J16
G16
F14
E3
E2
E4
H4
K1
E6
9 22
TDO TRACEPKT1
10 21
R118
EXTRSTn TRACEPKT0
11 20
TRIG_IN PIPESTAT2
TP108
12 19
PIPESTAT1
13 18
R117
PIPESTAT0
TP105
TP106
TP107
G 14 17
TRACESYNC
G
0
15 16
UART G3 G4
KEY_ROW0
I2S1_RX
PM_INT
UART_RX
MON_RX
UART_BT_RTS
UART_BT_CTS
UART_BT_RX
UT100
_DIF_CS1
DIF_CD
_DIF_WR
SIM_EN
HOOK_DETECT
DIF_VSYNC
_DIF_RESET
REMOTE_INT
CIF_PCLK
CIF_HSYNC
CIF_VSYNC
CIF_MCLK
CIF_PD
CIF_RESET
DSR
MMC_DETECT
EAR_N
EAR_P
BB_SND_L
BB_SND_R
I2S1_CLK
MICOM_INT
I2S1_TX
I2S1_WA0
_EOC
LCD_ID
_PPR
BT_INT
VIB_PWM
KEY_EN
SCL
SDA
UART_TX
MON_TX
UART_BT_TX
CLK32K
WDOG
RESOURCE_CTRL
VCXO_EN
BT_RESETn
3G 2.5G
DIF_D0
DIF_D1
DIF_D2
DIF_D3
DIF_D4
DIF_D5
DIF_D6
DIF_D7
DIF_D8
CIF_D0
CIF_D1
CIF_D2
CIF_D3
CIF_D4
CIF_D5
CIF_D6
CIF_D7
1
GND GND
2 V_CHAR
RX RX UART_RX
3
TX TX UART_TX
4 2V62_VIO
VCHAR NC1
5 USB_POWER FL100 ICVE10054E250R201FR
1000 pF
22n
R119 1.5K
URXD
C138
C139
9
15p
15p
4 6
UTXD NC4 USB_DP KEY_ROW1 INOUT_A4 INOUT_B4
10
DSR DSR
G1
G2
11
RTS UART_RTS
12
5
10
CTS UART_CTS
L100 L101 L102 L103
FL101 ICVE10054E250R201FR 100nH 100nH 100nH 100nH
H KEY_COL0
1
INOUT_A1 INOUT_B1
9 H
2 8
USB_DAT_VP
USB_SE0_VM
ISSP_CLK_LED
ISSP_SDA_LED
3 7
KEY_COL2 INOUT_A3 INOUT_B3
4 6
KEY_COL3 INOUT_A4 INOUT_B4
MAIN_MIC_N
MAIN_MIC_P
HS_MIC_N
HS_MIC_P
G1
G2
OJ101
5
10
CIF_SCL
CIF_SDA
1 2 3 4 5 6 7 8 9 10 11 12
Copyright © 2008 LG Electronics. Inc. All right reserved. - 123 - LGE Internal Use Only
Only for training and service purposes
8. CIRCUIT DIAGRAM
1 2 3 4 5 6 7 8 9 10 11 12
VBAT
VCHG_VUSB
AUDIO AMP
PMIC VUSB
VBAT VBAT
2V62_VIO C202 C203
RESOURCE_CTRL
A C201 R200 2.2u 0.1u
A
SPOWER_INT
2.2u RTC_OUT ON_OFF2
2.2u
27K
1V35_VPLL
ON_OFF2
C204 R201
SDA
C200
PWRON
VBAT
KEY_BACKLIGHT
WDOG
0.1u DNI
_PPR
2.2u
C205
VBAT 2V62_VIO VBAT
SCL
VBAT
KEY_EN
C5
C3
E2
E4
C206
4.7K
4.7K
4.7K
R206 4.7K
100u
2.2u
2.2u
VDD
VDDLS
GND1
GND2
1u
R207
4.7K
C209
C207
A3 D5
C208
R203
R204
R205
SP_INT
MINP LS+ SPK_OUTP
0.1u
TP201
R208
100K
B3 B5
DNI
0.1u
MINN LS- SPK_OUTN
1u
USB_OEn TP200
C210
A5
USB_DAT_VP BB_SND_R RIN L216 100nH
R209
C212
C211
220n C213 D1
USB_SE0_VM HPL HSO_L
B4
KDS160E
R210 0 BB_SND_L LIN U200 L210 100nH
D200
10uH 220n C214
LM49100GR HSO_R
C485 C484
TXON_PA
220n 220n
1V8_SD 2V5_VAUDB VBAT L200 1V35_CORE 2V8_CAM_A 2V7_VRF 2V85_VRF 1V5_VRF 2V9_VMME E1
B B
B10
A10
A11
B11
K10
HPR
L11
C3
C4
C5
C7
C8
C9
B2
A2
B3
A3
A4
B5
B6
B7
A5
A7
A6
B8
A9
B9
B4
A1
K3
K4
K5
K6
K7
K8
K9
A8
VBAT A4
L1
L3
L4
L5
L6
L7
L8
L9
J4
J5
J7
J8
J9
FM_SND_R BYPASS C217 C218
2V5_VAUDA 2V85_VFM VBAT 1V5_VBT 2V11_RTC 2V9_SIM 2V65_VBT 1V8_SD E3
GNDS 47p 47p
SE0_VM
DAT_VP
AC-
AC+
SUSPEND
OE_N
VUSB
VDD_USB
MONO_INP
MONO_INN
VDD_MONO
VREFEX_M
MONO_OUTP
VSS_MONO
MONO_OUTN
RREF
VREF
FLASH_SHINK
FLASH_ON
TXONPA
VPLL
VDDPLLIO
VIO
VSD2
PUMS3
PUMS2
PUMS1
OUTPORT
POWER_ON
WDOG
ON_OFF1
ON_OFF2
ON_OFF_OUT
RESOURCE_CRTL
I2C_INT
I2C_DAT
I2C_CLK
BL1_PWM
BL2_PWM
BL3_PWM
CH_CNTRL
CH_SOURCE
CHARGE_UC
VDD_CHARGE
SENSE_IN1
SENSE_IN2
VDD_REF
VLED
VSD1
FM_SND_L
D3 D2
VDDI2C VDDHP
B1 D4
U_RCV RCV SDA SDA
C2 E5 A1
U_PMIN VPIN SCL SCL VDDCP
D3 C11
GNDCP
VMIN VMME
VSSHP
VSSCP
U_VMIN
ADDR
C1 C10
USB_DP D+ VDDMME
C1N
C1P
D2 2V85_VFM
USB_DM D-
D10 2V62_VIO
PMRSTn VDDRF2
C4
C2
C1
B1
B2
A2
E3 D11
PMRSTn RESET_N VRF2
FB200
D1
RESET2_N R214 100K L215
E2 E10
VCXO_EN SLEEP1_N VRF3
E1 E11 100nH
BT_VCXO_EN SLEEP2_N VDDRF13_AFC
C219
2.2u
C220 C221 C222
F2 F10 C223
VAUDIOA VRF1 C224 2.2u
F1 F11 4.7u 0.1u
VDDAUDIOA U201 VVIB 4.7u
G11 0.1u
PMB6821 VDDSIMVIB
G2
VDDAUDIOB
G1 G10
C VAUDIOB VSIM C
H2 H11
VAUX VAFC
H1
VDDAUX
H10
KDS160E
10uH
J1
2.2u 2.2u 1u SU1_GATE
J2 H9
SU1_GND VDDUMTS
H3 J11
SU1_FB VUMTS
L201
J3 FB201
SU1_ISENSE
K11
VDDSD1
K1 J10
VDDSD2 SD1_FB
K2 L10
SD2_FB SD1_FBL
L2
VSS_VREF
SD2_FBL
VSS_SD1
VSS_SD2
VSS10
VSS11
VSS12
VSS13
VSS14
VSS15
VSS16
VSS17
VSS18
VSS19
VSS20
VSS21
VSS22
VSS23
VSS24
VSS25
VSS26
VSS27
VSS28
VSS29
VSS30
C228
C229
C230
LDO for VIBRATOR
VSS1
VSS2
VSS3
VSS4
VSS5
VSS6
VSS7
VSS8
VSS9
VBAT
C233
C234 C235 0.1u 10u C236 C237 C238 10u C239 C240 C241 C242 C243 C244 C245 C246 C247 C248 C249
C6
D4
D5
D6
D7
D8
E4
E5
E6
E7
E8
E9
F3
F4
F5
F6
F7
F8
F9
G3
G4
G5
G6
G7
G8
G9
H5
H6
H7
J6
D9
H8
H4
10u
10u
10u
22u 2.2u C231 2.2u 0.1u 2.2u C232 2.2u 1u 1u 1u 2.2u 2.2u 2.2u 2.2u 2.2u 2.2u 2.2u
3V1_VIB
D U202 R1114D311D D
1 3
C492 C491 VDD VOUT
10u 10u
1u
4 2
R215
5.1K
NC GND1
6 5
R216
VIB_EN CE GND2
C250
1K
C251 VIB_IN-
1u
VIB_IN+
R217
910
C252
0.1u
Q200 C OUT
B
VIB_PWM IN
E GND
E KRC402E E
Remote Power On CHARGING IC
2V11_RTC
2V62_VIO 2V9_VMME VBAT 2V9_SIM
R219 2V11_RTC
100K 2V62_VIO
CN200
MAIN TO SUB CONNECTOR
VCHG_VUSB VBAT 3V1_VIB
PWRON
1 G1 G2 44
R220
100K
RPWRON_EN
3.3M 2 43
R223
1
VIN BAT
8
MAIN TO TOUCH CONNECTOR VIB_IN-
360mA 3 42
2 7
3.3M _PPR _PPR IREF VIB_IN+
C253 50mA 4 41
3 6
2.2u _EOC _CHG IMIN MMC_DETECT KEY_BACKLIGHT
F 4 5
5 40 F
CHG_EN _EN GND MMC_D(0) KEY_COL0
9
PGND 6 39
2V62_VIO 2V85_VFM 3V3_TCH 3V3_LED
MMC_D(1) KEY_COL1
END_KEY_IN 7 38
MMC_D(2) KEY_COL2
8 37
C254 R226 R227 C255 MMC_D(3) KEY_COL3
1u 130K 30K 1u 9 36
MMC_CLK BAT_ID
CN201
G1 G2 10 35
END_KEY
1 40
11 34
2 39
MLED1 SIM_EN
3 38
MLED2 12 33
4 37
MLED3 KEY_ROW0 SIM_IO
5 36
MLED4 ISSP_CLK_LED 13 32
6 35
_DIF_RESET ISSP_SDA_LED KEY_ROW1 SIM_RST
7 34
_DIF_WR ISSP_CLK_TCH 14 31
8 33
ISSP_SDA_TCH KEY_ROW2 SIM_CLK
9 32
G _DIF_CS1
10 31
TCH_RESET 15 30 G
DIF_CD MICOM_INT KEY_ROW3 SPK_RCV_N
EXTERNAL RESET DIF_VSYNC
11 30
DIF_D0 16 29
12 29
DIF_D1 KEY_ROW4 SPK_RCV_P
13 28
COAXIAL CABLE Current Monitor 14 27
DIF_D2
DIF_D3 FLASH_LED_EN
17 28
MMC_CMD
2V62_VIO 2V11_RTC 15 26
I2C_CLK_TCH_LED DIF_D4 18 27
16 25
LCD_ID DIF_D5 FLASH_LED_TORCH
17 24
SLIDE_DETECT DIF_D6 19 26
VSUPPLY 18 23
MLED DIF_D7
VBAT 19 22
R230
100K
I2C_SDA_TCH_LED DIF_D8 20 25
C256 20 21
0.1u
21 24 VMIC_P
C257 G3 G4
2.2u MAIN_MIC_P
VSUPPLY
22 23
EXTRSTn 7 A1 VCC 8 MAIN_MIC_N
V_PAD U205
SPOWER_INT 6 B1 Y1 1 PM_INT R231
5 1 G3 G4
_RESET 5 Y2 B2 2 PMRSTn 47mohm LOAD NC
4 3 2 C259 C258 C260 C261 C262
GND A2 GND
4 3
C263 GND1 VIN IOUT LOAD
0.1u 0.1u 0.1u 0.1u 0.1u
H U204 0.1u ZXCT1010E5TA C264 R232 H
NC7WZ08L8X 1u 2.2K C265 C266 C270 C267
1u 1u 2.2u 2.2u
GND
1 2 3 4 5 6 7 8 9 10 11 12
LGE Internal Use Only - 124 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
8. CIRCUIT DIAGRAM
1 2 3 4 5 6 7 8 9 10 11 12
R300
USB_POWER
DNI
3M Camera Sensor 1
U300 NCP348MTR2G
10 R301
9
100K
IN2 GATE_OUT
2V8_CAM_A
R302 EVLC18S02003 5 8 VCHG_VUSB
CIF_PCLK IN3 GATE A
FLASH_LED_EN
10
VA300
5
24
3 7
G1
G2
_FLAG OUT2
INOUT_A4 INOUT_B4 CIF_D0 2V62_VIO C473
4 6 2 6
INOUT_A3 INOUT_B3 CIF_D1 1u GND OUT1
FL301 ICVE21184E150R101FR 3 7 2V5_VAUDB 11
10u
INOUT_A2 INOUT_B2 CIF_D2 NC1
1 9 1V8_CAM 2 8 12
INOUT_A1 INOUT_B1 INOUT_A1 INOUT_B1 CIF_D3 NC2
2 8 1 9
C300
CIF_RESET
FB300
INOUT_A2 INOUT_B2 R303
3 7 FL300 ICVE21184E150R101FR U301
CIF_SDA INOUT_A3 INOUT_B3
NCS2200SQ2T2G 1M
4 6
CIF_SCL INOUT_A4 INOUT_B4 FL302
5 4 VIN-
G1
G2
CN300 R304 1 VCC LL1608-FSL33NJ
G1 G2 HOOK_DETECT
10
5
10
OUT 3 VIN+
5
GND
47
1 34 C301 0.1u 2 V_CHAR
G1
G2
R305
2 33 C302
INOUT_A4 INOUT_B4 CIF_D4 220K
3 32 4 6 120p
INOUT_A3 INOUT_B3 CIF_D5
4 31 3 7 R309 2V5_VAUDB
INOUT_A2 INOUT_B2 CIF_D6
5 30 2 8 2V62_VIO
INOUT_A1 INOUT_B1 CIF_D7 1.5K
6 29 1 9
C482
7 28 FL303 ICVE21184E150R101FR
47p C304 24p FM_ANT
10
ICVE21184E150R101FR 8 27
5
B C303 VSUPPLY B
9 26
G1
G2
27p
10 25 HS_MIC_N L300
CIF_PD INOUT_A4 INOUT_B4
4 6 11 24 C305 100nH
10K
10K
DNI
DNI
INOUT_A3 INOUT_B3 C307 DNI L301 100nH ICVS0518270FR
3 7 12 23 22n R313 2.2K
CIF_VSYNC INOUT_A2 INOUT_B2 CIF_VS 10p C309 C306
2 8 13 22 HS_MIC_P R350 18
CIF_HSYNC INOUT_A1 INOUT_B1 CIF_HS
R314
R310
R311
R312
1 9 14 21 C308 19
CIF_CIN C312 22n
FL304 C311 15 20 1
CIF_CIN 27p C313
0.1u 16 19 FB301 2
R315 EVLC18S02003 CIF_VS 10u
17 18 3
CIF_MCLK CIF_HS JACK_TYPE
VA301 R316 DNI 4
24
G3 G4 5
2V8_CAM 6
MULTI_PORT_0
7
MULTI_PORT_1
R317 47 8
JACK_DETECT
9
FB302 10
C399 C314 C315
11
10u 10u 0.1u RPWRON_EN
12
13
R318 47 14
C DSR
15
C
16
UART_TX
R319 47 17
UART_RX
R320 47 FL305 FL306 18
EVSC5S04F050 EVSC5S04F050
P5 5
P4 4
P5 5
P4 4
R351 18
20
P6 P6
1u
1u
6 6
L304 C483
P3 3 P3 3 CN301
HSO_L 47p
C318
C319
1 P1
2 P2
1 P1
2 P2
1000 C320
82p
C321 24p
L306 100nH
L307
BACK UP BATTERY HSO_R
1000
C323
END_KEY_IN 82p
D D
2V11_RTC
KEY_ROW0
3
R321 2 Q300
END_KEY 4.7K
KTC4075E
10K 1
R322
R323
100K
KEY_COL2
BAT300
LCD BACKLIGHT & CAMERA FLASH LED DRIVER
E E
U302 APDS-9005-020
1 6
VCC OUT
R324 1
2 5
NC1 NC4
C324 C325
VBAT VBAT 1u 1u
C326
C331 2.2u
9
6
7
F 1u 2V62_VIO VBAT
F
U303
C1P
C1M
C2P
C2M
C327 4.7u 10
NLAS5223BMNR2G VIN1
4
VOUT MLED
1 10
VCC NO2 SPK_OUTN R326 8 3
DNI PGND1 DIN1 MLED1
2 9 2
SPK_OUTP NO1 COM2 SPK_RCV_N DIN2 MLED2
Pin6 1 3V3_TCH
MON_TX DIN3 MLED3
3 8 Pin7 20 28
SPK_RCV_P COM1 IN2 MON_RX VIN2 DIN4 MLED4
C328 2V62_VIO 26 3V3_LED
DIN5
GND
4 7 0.1u VBAT
SPK_RCV_SEL IN1 NC2 EAR_N C329 U305 21 VBAT
U304 2.2u SM8152AB-G LDOUT1
6
16
15
14
13
5
NLAST9431MT R327 10K 11
EAR_P NC1 VEN
19 1V8_CAM
COM_A
NO_A0
VCC
NC_D1
R328 LDOUT2
13
10K C330 SCL SCL
1 12 14 17 VBAT
JACK_DETECT NC_A1 COM_D MULTI_PORT_1 0.01u SDA SDA VIN3
2 11 12
C332 SAB NO_D0 SBN_EN SBN
3 10 18 2V8_CAM
120p NO_B0 SCD C LDOUT3
4 9 OUT 24
COM_C
COM_B NC_C1 CD
NO_C0
NC_B1
Q301 B R329 23 16
GND
VCHG_VUSB PD VIN4
G_SLUG
RN1307 IN
G R331 R332 10K G
LMON
GND1
Pin6 E
22 15
REMOTE_INT GND 10K VREF LDOUT4
5
6
7
8
100K MULTI_PORT_0
Pin7
REMOTE_ADC
27
25
29
C334 C335 C336
C333
2.2u 2.2u 2.2u
VUSB 1u
VA302 C337
0.01u C338 C339 C340
2.2u 2.2u 2.2u
1 2 3 4 5 6 7 8 9 10 11 12
Copyright © 2008 LG Electronics. Inc. All right reserved. - 125 - LGE Internal Use Only
Only for training and service purposes
8. CIRCUIT DIAGRAM
1 2 3 4 5 6 7 8 9 10 11 12
GSM850 / 900_TX H L
A CN410
A
1 GSM 1800 / 1900_ TX L H [Rev.D] Change 5.6nH to 5.1nH (L406)
GSM850 / 900_RX L L [Rev.D] Change 1.2pF to 1.5pF (C420, C421)
C400
GSM 1800 / 1900_ RX L L
1000p
R400
100ohm Y2 A2 FE1
19
20
21
10
12
13
14
16
18
22
23
24
9
B B
LSHS-C085FB
VC1
VC2
NC
GND1
GND2
GND3
GND4
GND5
GND6
GND7
GND8
GND9
GND10
GND400
FL400
C474
100p C403
12p
GSM1800_1900_TX
GSM1800RX_OUT1
GSM1800RX_OUT2
GSM1900RX_OUT1
GSM1900RX_OUT2
C475 22p
GSM850RX_OUT1
GSM850RX_OUT2
GSM900RX_OUT1
GSM900RX_OUT2
GSM850_900_TX
G2
ANT RF
G1
GND25 GND15
SW400 27 26
GND24 GND14
RF-650 28 25
L412 GND23 GND13
29 24
ANT
27nH GND22 GND12
30 23
10nH GND21 GND11
31 22
C405 GND20 GND10
11
15
17
1
2
3
4
5
6
7
8
C406 32 21 VSUPPLY
GND19 GND9
0 33 20
GND18 GND8
34 19
GND17 GND7
35 U401 18
GND16 GND6
36 SKY77340 17
C407 C408
C DNI DNI
9
GSM_OUT EN
8
TXON_PA C
GND5 GSM_IN LBAND_PAM_IN
10 7
GND4 VRAMP PA_LEVEL
11 6 R404 1.2K
RSVD2 VBATT 1 R405
GSM850 GSM900 DCS1800 PCS1900 12 5
GND3 RSVD1 VBIAS
13 4
2V85_VRF 2V85_VRF C480 GND2 BS PA_BAND
1V5_VRF 22p 14 3
GND1 DCS_PCS_IN HBAND_PAM_IN
15 2
C414 C415 C416 DCS_PCS_OUT MODE PA_MODE
C417 C418 C419 C420 C421 16 1
2.5p 2.5p 2.2p C409 C410
2.2p 2.2p 2.2p 1.5p 1.5p
DNI 0.5p
C422 C423
0.1u 4.7n C424 C425 C411 C426 C427 C428 C412 C429 C413
L404 L405 68u
L403 L406 0.1u 1u 27p 100p 100p 100p 820p 100p
2V85_VRF 2V85_VRF
D 1V5_VRF
D
2V62_VIO
0.1u
FE1
VDDBIAS2V8
RX1X
RX1
RX2X
RX2
GND2
RX3X
RX3
RX4X
RX4
VDDLNA1V5
FE2
33
VBIAS VBIAS
34
VDDTX1V5 VDDRX2V8
35 20 C434
LBAND_PAM_IN TX1 U402 VDDRX1V5
36 19 R406 47n
HBAND_PAM_IN TX2 PMB6272 VCO_RC 1V5_BT_LDO
37 18 820
VDDTX2V8 VDDVCO2V8
38 17
VDDMIX2V8 EN RF_EN
1
39 16
C438 C439 R407 GND3 VDDXO2V8 C437
BLUETOOTH_CSR
VDDDIG2V8
VDDDIG1V5
10 40 15
0.1u 0.1u FSYS1 26MHZ_MCLK
14
R409
GND4 GND1 1000 pF C490
FSYS3
FSYS2
41 13 2V85_VRF
XOX
CLK
0.01u
XO
DA
AX
BX
E E
A
1
1
2
3
4
5
6
7
8
9
10
11
12
1V5_VRF 2V85_VRF
R410
10
C441 R412
R411
1000p X400
3 1 10K
OUT VCONT AFC BT400 BT401
R413 L408
C442 C444 C445 C446
4 2
10 VCC GND 0.01u 100p 15p 0.1u 2.2u
C452 C453 L407 C454
C450 C451 26MHz
220n 0.1u 0.1u 1u NA DNI
G10
H10
C10
B10
G2
G9
G3
G8
C2
H1
C1
D2
C3
D3
H2
A2
A7
A6
K1
B2
B4
E2
E3
B6
F2
F3
J6
J3
BT_CLK
VDD_PIO
VDD_FM
VDD_RADIO_1
VDD_RADIO_2
VDD_USB
VDD_PADS
VDD_CORE_1
VDD_CORE_2
VDD_LO
VDD_AUDIO
VDD_ANA
VSS_PIO
VSS_FM1_1
VSS_FM1_2
VSS_FM2
VSS_DIG
VSS_RADIO_1
VSS_RADIO_2
VSS_RADIO_3
VSS_ANA_1
VSS_ANA_2
VSS_ANA_3
VSS_ANA_4
VSS_ANA_5
VSS_ANA_6
VSS_PADS
VSS_CORE
VSS_LO
C455 C456
RF_CLK 15p 15p
47n C457
RF_DA AU_REF I2C_DATA
A3 C8
FM_SND_R A4
SPKR_R I2C_CLK
C7
QX FM_SND_L A5
SPKR_L
F C481 220n R416 560 USB_DN
K6
F
C460 1000 pF FILT_EXT USB_DP
B3 J7
Q CLK32K C461 0.1u C9
CLK_32K UART_CTS
H6
UART_BT_RTS
K3
LO_REF UART_RTS
H5
UART_BT_CTS
C462 1000p
J2
XTAL_OUT UART_RX
K7 TP402
UART_BT_TX
IX BT_CLK K2
XTAL_IN UART_TX
J8 TP403
UART_BT_RX
L409 47 L410 270nH
C463 820p
FM_ANT B1
FM_P BLUECORE5-FM PCM2_CLK
D9
I FM_N M400 PCM2_SYNC
C465 820p A1 D10
C466 PCM2_IN
LFB212G45BA1A220 ICVS0518150FR E10
AUX_DAC PCM2_OUT
FL401 B5 D8
4
RX_N
D1
G1
E1
RX_P PCM_CLK
H9 TP404 I2S1_CLK
VREGENABLE_H
I2S1_WA0
VREGENABLE_L
UB B1 NA RF_P PCM_SYNC
3 5 F1 J10 TP405
NC_DC G2 RF_N PCM_IN I2S1_TX
VREGOUT_H
2 6 C467 G1 K8 TP406
I2S1_RX
VREGIN_H
NC B2 PCM_OUT
VREGIN_L
SPI_MOSI
SPI_MISO
TEST_EN
1 7 H7 TP407
SPI__CS
SPI_CLK
G3
PIO_11
PIO_10
PIO_9
PIO_8
PIO_7
PIO_6
PIO_5
PIO_4
PIO_3
PIO_2
PIO_1
PIO_0
AIO_1
AIO_0
_RST
1V5_BT_LDO
8
C468
33nH
L413
15p
C6
A8
B7
C5
F10
F9
E8
E9
B9
B8
A9
A10
J4
K4
F8
J9
H8
K10
K9
C4
H3
H4
J1
J5
K5
2V65_VBT
G G
BT_INT
TP408 C440
0.01u FB401
R414
2.2
BT_VCXO_EN
R415
47K
C472 C469
0.1u 100p
2V62_VIO
H H
1 2 3 4 5 6 7 8 9 10 11 12
LGE Internal Use Only - 126 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
8. CIRCUIT DIAGRAM
1 2 3 4 5 6 7 8 9 10 11 12
2 43
VIB_IN-
3 42
U500 TPA6205A1ZQVR VIB_IN+
4 41
R501 51K C3 A3 100nH +
VIB_IN- IN- VDD MMC_DETECT KEY_BACKLIGHT
L500 5 40
R502 51K C2 B3 OUT500
VIB_IN+ IN+ VO+ MMC_D(0) KEY_COL0
2V9_SIM
6 39
B1 A1
_SHUTDOWN VO- MMC_D(1) KEY_COL1
B C1 B2
L501 OUT501 -- 7 38 B
BYPASS GND 100nH MMC_D(2) KEY_COL2
8 37
C501 C502 C503 C504 MMC_D(3) KEY_COL3
1u 22p 22p 9 36
0.1u
MMC_CLK BAT_ID S
10 35 SIM_EN G NTS2101PT1G
R503 100K END_KEY
Q500
11 34 D
SIM_EN
12 33
KEY_ROW0 SIM_IO
13 32
KEY_ROW1 SIM_RST
14 31
KEY_ROW2 SIM_CLK R504
15 30
10K
KEY_ROW3 SPK_RCV_N
16 29
J500
KEY_ROW4 SPK_RCV_P
1 6
C RCV / SPK FLASH_LED_EN
17 28
MMC_CMD SIM_RST
2
VCC
RST
I_O
VPP
5
C
3 4
18 27 SIM_CLK CLK GND
FLASH_LED_TORCH
19 26 SIM_IO
100nH
C506 C507
L504
20 25
C508
OUT502 22p 0.1u
SPK_RCV_P 21 24
MAIN_MIC_P VMIC_P 150p
R512
22 23
100nH
DNI
L505
MAIN_MIC_N
OUT503 G3 G4
SPK_RCV_N
D D
2V9_VMME
2V62_VIO
VBAT
R505
C514 2.2u LM2758TL U501 100K
C1 B1
F VBAT C1+ F
C515
A1
FLASH_LED_EN EN1 1u R507 R508 R509 R510 R511
B3
FLASH_LED_TORCH EN2 100K 100K 100K 100K 100K
A3 D2 S500 DM3AT-SF-PEJ
ISET C1- SWA SWB
R506 15K C516 MMC_DETECT
D3 C2 VBAT
PGND C2+ 1u MMC_D(1) 8
A2 VA502
SGND C517 MMC_D(0) 7
EVLC5S0250
1u VMIC_P 6
C3 L506 100nH
LED- MMC_CLK 5
LD500 B2 D1 CN501
CPOUT C2- 4
1 20
C518 KEY_BACKLIGHT MMC_CMD 3
STROBE 650mA 2 19
2.2u KEY_COL0 MMC_D(3) 2
TORCH 150mA 3 18
KEY_ROW0 KEY_COL1 MMC_D(2) 1
4 17
KEY_ROW1 KEY_COL2
5 16 GND
KEY_ROW2 KEY_COL3
6 15
C519 KEY_ROW3 BAT_ID
7 14 C520 C521
27p KEY_ROW4 END_KEY
8 13
9 12 22p 1u
MAIN_MIC_P
L507 100nH 10 11
G C522 G
47p
MAIN_MIC_N
L508 100nH
VA503
C523
EVLC5S0250
27p
H H
1 2 3 4 5 6 7 8 9 10 11 12
Copyright © 2008 LG Electronics. Inc. All right reserved. - 127 - LGE Internal Use Only
Only for training and service purposes
8. CIRCUIT DIAGRAM
1 2 3 4 5 6 7 8 9 10 11 12
A A
KEYPAD
B B
AF_CAM
1 4
KEY_ROW4
KEY_COL0
KEY_COL1
D KEY_COL2
D
KEY_COL3
E E
ID_P70
BAT_ID
ID_P71
CN700
1 20
VBAT
VMIC_P KEY_BACKLIGHT
2 19
KEY_COL0
3 18
KEY_ROW0 KEY_COL1
LD700 LEWWS47PAZ 4 17
KEY_ROW1 KEY_COL2
R700 100ohm
KEY_BACKLIGHT 5 16
KEY_ROW2 KEY_COL3
R701 100ohm
LD701 LEWWS47PAZ 6 15
KEY_ROW3 BAT_ID
G 7 14
G
KEY_ROW4 END_KEY
8 13
9 12
MAIN_MIC_P
10 11
MAIN_MIC_N
H H
1 2 3 4 5 6 7 8 9 10 11 12
LGE Internal Use Only - 128 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
8. CIRCUIT DIAGRAM
2V85_VFM
3V3_TCH 2V62_VIO 3V3_LED
CN201
G2 G1
CN600 40 1
G1 G2 39 2
MLED1
1 40 38 3
MLED2
2 39 37 4
MLED1 MLED3
3 38 36 5
MLED2 MLED4 I2C_CLK_LED
4 37 35 6
MLED3 _DIF_RESET I2C_SDA_LED
5 36 34 7
MLED4 I2C_CLK_LED _DIF_WR I2C_CLK_TCH
6 35 33 8
_DIF_RESET I2C_SDA_LED I2C_SDA_TCH
7 34 32 9
_DIF_WR I2C_CLK_TCH _DIF_CS1 TCH_RESET
8 33 31 10
I2C_SDA_TCH DIF_CD MICOM_INT
9 32 30 11
_DIF_CS1 TCH_RESET DIF_VSYNC DIF_D0
10 31 29 12
DIF_CD MICOM_INT DIF_D1
11 30 28 13
DIF_VSYNC DIF_D0 DIF_D2
12 29 27 14
DIF_D1 DIF_D3
13 28 26 15
DIF_D2 CIF_SCL DIF_D4
14 27 25 16
DIF_D3 LCD_ID DIF_D5
15 26 24 17
CIF_SCL DIF_D4 SLIDE_DETECT DIF_D6
16 25 23 18
LCD_ID DIF_D5 MLED DIF_D7
17 24 22 19
SLIDE_DETECT DIF_D6 CIF_SDA DIF_D8
18 23 21 20
MLED DIF_D7
19 22
CIF_SDA DIF_D8
20 21 G4 G3
G3 G4
6 7 8 9 10 11 12
Copyright © 2007 LG Electronics. Inc. All right reserved. - 129 - LGE Internal Use Only
Only for training and service purposes
8. CIRCUIT DIAGRAM
1 2 3 4 5 6 7 8 9 10 11 12
3V3_LED 3V3_TCH
A
FB600 FB601
2V62_VIO
C620 C621 C600
2.2u 2.2u
LED(22)
LED(21)
LED(20)
2.2u
2
LED(7)
SEN14
OUT
VDD
ICVN0505X150FR
SEN6
LED(8) C602 C603
EM-0781-T5
0.1u 0.1u
U600
VA600
VSS
TP600
Touch Debug
NC
4
3
33
32
31
30
29
28
27
26
25
B C604 B
0.01u
GND
VSS1
P0_3
P0_5
P0_7
VDD
P0_6
P0_4
P0_2
33
32
31
30
29
28
27
26
25
1 24
LED(0) P0_1 P0_0 LED(19)
2 23
LED(1) P2_7 P2_6 LED(18)
GND
VSS1
P0_3
P0_5
P0_7
VDD
P0_6
P0_4
P0_2
3 22
LED(2) P2_5 U601 P2_4 LED(17)
4 21
LED(3) P2_3 CY8C21434 P2_2 LED(16)
5 20 1 24
LED(4) P2_1 P2_0 LED(15) SEN0 P0_1 P0_0 SEN13
6 19 2 23
LED(5) P3_3 P3_2 LED(14) SEN1 P2_7 P2_6 SEN12
7 18 3 22
LED(6) P3_1 P3_0 LED(13) SEN2 P2_5 U602 P2_4 SEN11
8 17 4 21
SCL P1_7 XREX TCH_RESET SEN3 P2_3 CY8C20434 P2_2 SEN10
DNI R600 5 20
SEN4 P2_1 P2_0 SEN9
6 19
VSS2
P1_5
P1_3
P1_1
P1_0
P1_2
P1_4
P1_6
VSS2
P1_5
P1_3
P1_1
P1_0
P1_2
P1_4
P1_6
9
10
11
12
13
14
15
16
C C
SDA
LED(9)
LED(10)
LED(11)
LED(12)
SEN5
SCL
R639 1K
I2C_CLK_LED SDA R636 1K
I2C_SDA_LED MICOM_INT
R640 1K
R637 1K
I2C_SDA_TCH
R601 47 LD600
LED(0)
R603 47 R604 47
SENSOR FOR TOUCH
LD602 LD603
LED(1) LED(15)
R606 47 LD605
(3 X 5)
LED(16)
R607 47 LD606 R608 47 LD607
LED(3) LED(17)
R611 47 LD609
D LED(18) D
R613 47 LD610 R614 47 LD613
LED(5) LED(4)
R615 47 LD612 R616 47 LD611
LED(6) LED(8) SEN0 SEN1 SEN2 SEN3 SEN4
R617 47 LD614 R618 47 LD615
LED(7) LED(21) SEN_600 SEN_601 SEN_602 SEN_603 SEN_604
R621 47 LD617
LED(22)
R622 47 R623 47 SEN5 SEN6 SEN7 SEN8 SEN9
LD618 LD627
LED(9) LED(2)
SEN_605 SEN_606 SEN_607 SEN_608 SEN_609
R624 47 LD620 R625 47 LD628
LED(10) LED(14)
R626 47 LD622 R627 47 LD629
LED(11) LED(19) SEN10 SEN11 SEN12 SEN13 SEN14
R628 47 LD624 R629 47 LD630
LED(12) LED(20) SEN_610 SEN_611 SEN_612 SEN_613 SEN_614
R630 47 LD626
LED(13)
E E
LCD CONNECTOR
CN600
3 G2 G1
4
PGND
40 1
DIF_D0 FILTER1_8 FILTER2_8 5
8 9 39 2
DIF_D1 FILTER1_7 FILTER2_7 6 MLED1
7 10 ICVN0505X150FR 38 3
DIF_D2 FILTER1_6 FILTER2_6 7 MLED2
6 11 37 4
DIF_D3 FILTER1_5 FILTER2_5 8 C610 C611 VA603 MLED3
5 12 36 5
DIF_D4 FILTER1_4 FILTER2_4 9 1u 0.1u MLED4 I2C_CLK_LED
4 13 35 6
DIF_D5 FILTER1_3 FILTER2_3 10 _DIF_RESET I2C_SDA_LED
3 14 34 7
DIF_D6 FILTER1_2 FILTER2_2 11 _DIF_WR I2C_CLK_TCH
2 15 33 8
DIF_D7 FILTER1_1 FILTER2_1 12 I2C_SDA_TCH
1 16 32 9
13 _DIF_CS1 TCH_RESET
CM1631-08DE FL600 31 10
14 DIF_CD MICOM_INT
30 11
G _DIF_RESET 15 2V85_VFM DIF_VSYNC
29 12
DIF_D0 G
16 DIF_D1
28 13
VA604 17 DIF_D2
27 14
18 DIF_D3
26 15
19 I2C_CLK_TCH_LED DIF_D4
25 16
R633
R634
100K
100K
20 LCD_ID DIF_D5
10
24 17
5
21 SLIDE_DETECT DIF_D6
23 18
G1
G2
22 MLED DIF_D7
22 19
_DIF_WR INOUT_A4 INOUT_B4 23 I2C_SDA_TCH_LED DIF_D8
4 6 21 20
DIF_D8 INOUT_A3 INOUT_B3 24
3 7
_DIF_CS1 INOUT_A2 INOUT_B2 25
2 8 G4 G3
DIF_CD INOUT_A1 INOUT_B1 26
1 9
27
ICVE10184E150R101FR 28
FL601 29
DIF_VSYNC 30 C612
31 0.1u
MLED4 32
MLED3 33
MLED2 34 C616 C613 C614 C615
H MLED1 35
2.2u 0.1u 0.1u 2.2u
H
MLED
1 2 3 4 5 6 7 8 9 10 11 12
LGE Internal Use Only - 130 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
9. BGM Pin Map
Copyright © 2008 LG Electronics. Inc. All right reserved. - 131 - LGE Internal Use Only
Only for training and service purposes
9. BGM Pin Map
USE
USE
Not IN
USE
LGE Internal Use Only - 132 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
10. PCB LAYOUT
Photo Sensor
18 Pin Connector
Memory
- 1G NAND
- 256M SDRAM
Bluetooth &
FM Radio
Power
Inductor
Crystal
- 32.768KHz
SM-POWER
- Analog Base Band
S-GOLD3
- Digital Base Band
Power Cable
Soldering PAD
External Reset
Copyright © 2008 LG Electronics. Inc. All right reserved. - 133 - LGE Internal Use Only
Only for training and service purposes
10. PCB LAYOUT
Antenna Contact
PAD
Camera Connector
Back Up Battery
FEM
Back Up Battery
PAM
Multi-Port Switch
RF Transceiver
Audio AMP
26MHz
B to B Connector
- Connecting on
SUB FPCB
LGE Internal Use Only - 134 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
10. PCB LAYOUT
CN500
B to B Connector
Connecting on MAIN
PCB
Error on SIM, T-flash
No Voice
Copyright © 2007 LG Electronics. Inc. All right reserved. - 135 - LGE Internal Use Only
Only for training and service purposes
10. PCB LAYOUT
Vibrator PAD
No Vibration
Speaker PAD
LD500 No Voice & Music
Flash LED
No Flash
J500
SIM Connector U500
Error on SIM Vibrator Driver
No Vibration
S500
T-flash Connector
U501 Flash LED Driver
Error on T-flash
No flash LED
CN501
B to B Connector
Connecting on
KEY FPCB
Error on Key Input
No Voice
LGE Internal Use Only - 136 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
10. PCB LAYOUT
LD700, LD701
Key Back Light LED
No Key B/L LED
AF_CAM
Camera Key
No Camera
CN700
B to B Connector
Connecting on SUB FPCB
No Key Input, No Voice
Copyright © 2007 LG Electronics. Inc. All right reserved. - 137 - LGE Internal Use Only
Only for training and service purposes
10. PCB LAYOUT
ON/END
Power On Key
No Power
MIC700
Microphone
No Voice
LGE Internal Use Only - 138 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
10. PCB LAYOUT
LD6XX
Touch PAD LED
(Side View LED)
No Light on LED
LD6XX
Touch PAD LED
No Light on LED
Copyright © 2007 LG Electronics. Inc. All right reserved. - 139 - LGE Internal Use Only
Only for training and service purposes
10. PCB LAYOUT
CN600
B to B Connector
(Connecting on BtoB
FPCB)
No Display & Touch
Detection
U600
U602 Hall Effect Switch
Touch Sensor Controller No detection on
Error on Touch detection Slide On/Off
U601 CN601
Touch PAD LED Controller LCD Connector
No motion on LED No Display on LCD
Animation
FL60X
LCD EMI/ESD Filter
No Display on LCD
LGE Internal Use Only - 140 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
10. PCB LAYOUT
CN201
B to B Connector
(Connecting on TOUCH FPCB)
No Display & Touch Detection
Copyright © 2007 LG Electronics. Inc. All right reserved. - 141 - LGE Internal Use Only
Only for training and service purposes
10. PCB LAYOUT
CN600
B to B Connector
(Connecting on TOUCH FPCB)
No Display on LCD
& Touch Detection
LGE Internal Use Only - 142 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
11. RF Calibration
11. RF Calibration
4.00 V 0.000 A
Copyright © 2008 LG Electronics. Inc. All right reserved. - 143 - LGE Internal Use Only
Only for training and service purposes
11. RF Calibration
LGE Internal Use Only - 144 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
11. RF Calibration
Operation Mode
1. By-Pass: not control by GPIB
2. Normal : control by GPIB
Copyright © 2008 LG Electronics. Inc. All right reserved. - 145 - LGE Internal Use Only
Only for training and service purposes
11. RF Calibration
LGE Internal Use Only - 146 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
11. RF Calibration
Saving for
Sav ormat
m at:
yea
earr/m
/ ont
nth/day_P
d _PASS
Notices:
1. The state of Phone is “test mode” during the CALIBRATION.
2. Calibration program automatically changes either “normal mode” or “ptest mode”.
3. RF Calibration steps as follow:
TX Channel compensation: EGSM->DCS->PCS->EDGE EGSM->EDGE DCS->EDGE PCS
RX Channel compensation: EGSM->DCS->PCS
4. Phone Operation Mode
Copyright © 2008 LG Electronics. Inc. All right reserved. - 147 - LGE Internal Use Only
Only for training and service purposes
12. Stand-alone Test
Not Connected
LGE Internal Use Only - 148 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
12. Stand-alone Test
Connected
5 For the purpose of the Standalone Test, Change the Phone to “ptest mode” and then Click the
“Reset” bar.
6 Select “Non signaling” in the Quick Bar menu. Then Standalone Test setup is finished.
Copyright © 2008 LG Electronics. Inc. All right reserved. - 149 - LGE Internal Use Only
Only for training and service purposes
12. Stand-alone Test
12.2 Tx Test
1 Click “Non signaling mode” bar and then confirm “OK” text in the command line.
LGE Internal Use Only - 150 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
12. Stand-alone Test
12.3 Rx Test
1 Put the number of RX Channel in the ARFCN.
2 Select “Rx” in the RF mode menu.
3 Finally, Click “Write All” bar and try the efficiency test of Phone.
Copyright © 2008 LG Electronics. Inc. All right reserved. - 151 - LGE Internal Use Only
Only for training and service purposes
13. ENGINEERING MODE
Engineering mode is designed to allow a service man/engineer to view and test the basic functions provided
by a handset. The key sequence for switching the engineering mode on is “2945#*#” Select. Pressing END
will switch back to non-engineering mode operation. Use Up and Down key to select a menu and press
‘select’ key to progress the test. Pressing ‘back key will switch back to the original test menu.
[6-4] Vibrator
[2-1] Version
[6-4-1] VibratorOn
[6-4-2] VibratorOff
[6-5] LCD
[6-5-1] Auto LCD
[6-5-2] Manual LCD
LGE Internal Use Only - 152 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
14.1 EXPLODED VIEW
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
8 9 10 12 13 15 17 18 21 20 22 23 24 25
1 3 4 5 7 11 16
19
6 14
2
Copyright © 2008 LG Electronics. Inc. All right reserved. - 153 - LGE Internal Use Only
Only for training and service purposes
ASS'Y EXPLODED VIEWEXPLODED VIEW
1 2
3
5
5
4
3
2
1
LGE Internal Use Only - 154 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
14.2 Replacement Parts Note: This Chapter is used for reference, Part order
<Mechanic component> is ordered by SBOM standard on GCSC
Location
Level Description Part Number Spec Color Remark
No
1 GSM(SLIDE) TGLL0015953 Dark Gray
COVER
4 ACGR00 ACGR0014301 Dark Gray B, 20
ASSY,SLIDE(LOWER)
COVER
4 ACGS00 ACGS0016401 Dark Gray 4
ASSY,SLIDE(UPPER)
Copyright © 2008 LG Electronics. Inc. All right reserved. - 155 - LGE Internal Use Only
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
5 MCCC00 CAP,EARPHONE JACK MCCC0051301 COMPLEX, (empty), , , , , Dark Gray
LGE Internal Use Only - 156 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
4 MTAB00 TAPE,PROTECTION MTAB0227901 COMPLEX, (empty), , , , , Without Color
Copyright © 2008 LG Electronics. Inc. All right reserved. - 157 - LGE Internal Use Only
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
<Main component> Note: This Chapter is used for reference, Part order
is ordered by SBOM standard on GCSC
Location
Level Description Part Number Spec Color Remark
No
1.4 mm,1.5 mm,SWCH18A ,B ,TRI , ,; ,[empty] ,[empty] ,
4 GMEY00 SCREW MACHINE,BIND GMEY0018101 Silver 15
, ,SWCH ,BLACK ,[empty] ,[empty]
PCB
5 SACB00 SACB0043902
ASSY,FLEXIBLE,INSERT
PCB ASSY,FLEXIBLE,SMT
6 SACC00 SACC0042801
BOTTOM
CONNECTOR,BOARD TO
7 CN501 ENBY0039601 20 PIN,0.4 mm,ETC , ,H=1.0, Socket
BOARD
LGE Internal Use Only - 158 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
SOT-323(SC-70) ,0.29 W,-8 V,-1.4 A,R/TP ,Low Rds
7 Q500 TR,FET,P-CHANNEL EQFP0007301
Power MOSFET, Pb free
PCB ASSY,FLEXIBLE,SMT
6 SACD00 SACD0054301
TOP
CONNECTOR,BOARD TO
7 CN500 ENBY0038701 44 PIN,0.4 mm,ETC , ,H=1.5, P4S Plug
BOARD
PCB ASSY,FLEXIBLE,SMT
6 SACC00 SACC0042701
BOTTOM
Copyright © 2008 LG Electronics. Inc. All right reserved. - 159 - LGE Internal Use Only
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
CONNECTOR,BOARD TO 40 PIN,0.4 mm,ANGLE , , ,; , ,0.40MM ,STRAIGHT
7 CN600 ENBY0045601
BOARD ,MALE ,SMD ,[empty] , ,
PCB ASSY,FLEXIBLE,SMT
6 SACD00 SACD0054201
TOP
PCB
5 SACB00 SACB0043701
ASSY,FLEXIBLE,INSERT
PCB ASSY,FLEXIBLE,SMT
6 SACD00 SACD0055601
TOP
1 V,1 A,HORIZONTAL ,1 G, ,; ,10C2P ,[empty] ,[empty]
7 AF_CAM SWITCH,TACT ESCY0005301
,[empty] , ,[empty]
CONNECTOR,BOARD TO
7 CN700 ENBY0039501 20 PIN,0.4 mm,ETC , ,H=1.0, Plug
BOARD
PCB
5 SACB00 SACB0043901
ASSY,FLEXIBLE,INSERT
PCB ASSY,FLEXIBLE,SMT
6 SACC00 SACC0042601
BOTTOM
LGE Internal Use Only - 160 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
7 C611 CAP,CHIP,MAKER ECZH0003103 0.1 uF,10V ,K ,X7R ,HD ,1005 ,R/TP
Copyright © 2008 LG Electronics. Inc. All right reserved. - 161 - LGE Internal Use Only
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
7 R624 RES,CHIP,MAKER ERHZ0000483 47 ohm,1/16W ,J ,1005 ,R/TP
PCB ASSY,FLEXIBLE,SMT
6 SACD00 SACD0054001
TOP
LGE Internal Use Only - 162 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
7 LD614 DIODE,LED,CHIP EDLH0012501 Snow White ,1608 ,R/TP ,color concept
PCB ASSY,MAIN,SMT
6 SAFC00 SAFC0112601
BOTTOM
Copyright © 2008 LG Electronics. Inc. All right reserved. - 163 - LGE Internal Use Only
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
7 C118 CAP,CHIP,MAKER ECZH0003103 0.1 uF,10V ,K ,X7R ,HD ,1005 ,R/TP
LGE Internal Use Only - 164 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
7 C232 CAP,CERAMIC,CHIP ECCH0005604 10 uF,6.3V ,M ,X5R ,TC ,1608 ,R/TP
Copyright © 2008 LG Electronics. Inc. All right reserved. - 165 - LGE Internal Use Only
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
7 C446 CAP,CERAMIC,CHIP ECCH0000198 2.2 uF,6.3V ,M ,X5R ,TC ,1005 ,R/TP
LGE Internal Use Only - 166 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
7 L410 INDUCTOR,CHIP ELCH0001556 270 nH,J ,1608 ,R/TP ,
Copyright © 2008 LG Electronics. Inc. All right reserved. - 167 - LGE Internal Use Only
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
7 R319 RES,CHIP,MAKER ERHZ0000483 47 ohm,1/16W ,J ,1005 ,R/TP
LGE Internal Use Only - 168 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
7 C219 CAP,CERAMIC,CHIP ECCH0000198 2.2 uF,6.3V ,M ,X5R ,TC ,1005 ,R/TP
Copyright © 2008 LG Electronics. Inc. All right reserved. - 169 - LGE Internal Use Only
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
7 C331 CAP,CERAMIC,CHIP ECCH0004904 1 uF,6.3V ,K ,X5R ,TC ,1005 ,R/TP
ERHY0000101 0 ohm,1/16W,F,1005,R/TP
7 C406 RES,CHIP
ECZH0000813 100pF,1/16W,F,1005,R/TP
LGE Internal Use Only - 170 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
7 C429 CAP,CHIP,MAKER ECZH0001126 820 pF,50V ,K ,X7R ,HD ,1005 ,R/TP
CONNECTOR,BOARD TO
7 CN200 ENBY0038901 44 PIN,0.4 mm,ETC , ,H=1.5, P4S Socket
BOARD
CONNECTOR,BOARD TO
7 CN300 ENBY0015601 34 PIN,0.4 mm,STRAIGHT ,AU ,0.9MM HEIGHT
BOARD
7 FL100 FILTER,EMI/POWER SFEY0012501 SMD ,SMD ,18 V,4ch. EMI_ESD Filter (200 Ohm,25pF)
7 FL101 FILTER,EMI/POWER SFEY0012501 SMD ,SMD ,18 V,4ch. EMI_ESD Filter (200 Ohm,25pF)
Copyright © 2008 LG Electronics. Inc. All right reserved. - 171 - LGE Internal Use Only
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
7 FL305 VARISTOR SEVY0008302 5.5 V,30% ,SMD ,1409Size (4CH)
PCB ASSY,MAIN,PAD
7 R103 SAFP0000501
SHORT
PCB ASSY,MAIN,PAD
7 R110 SAFP0000501
SHORT
PCB ASSY,MAIN,PAD
7 R118 SAFP0000401
SHORT
PCB ASSY,MAIN,PAD
7 R210 SAFP0000501
SHORT
LGE Internal Use Only - 172 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
7 R301 RES,CHIP,MAKER ERHZ0000406 100 Kohm,1/16W ,J ,1005 ,R/TP
Copyright © 2008 LG Electronics. Inc. All right reserved. - 173 - LGE Internal Use Only
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
Location
Level Description Part Number Spec Color Remark
No
SOT23-5 ,5 PIN,R/TP ,2.5V Sense voltage(max), current
7 U205 IC EUSY0286901
monitor
PCB ASSY,SUB,SMT
6 SAJC00 SAJC0022201
BOTTOM
6 SPJY00 PCB,SUB SPJY0049901 FR-4 ,1.1 mm,MULTI-4 ,TH Bat. Con PCB ,; , , , , , , , , ,
4 SVCY00 CAMERA SVCY0016201 CMOS ,MEGA ,3M AF [Micron 1/4" SOC3130, FPCB]
LGE Internal Use Only - 174 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
14. EXPLODED VIEW & REPLACEMENT PART LIST
14.3 Accessory Note: This Chapter is used for reference, Part order
is ordered by SBOM standard on GCSC
Location
Level Description Part Number Spec Color Remark
No
3.7 V,800 mAh,1 CELL,PRISMATIC ,CMW PJT BATT,
Innerpack, Europe Label, Pb-Free ,; ,3,7 ,800 ,0.2C
3 SBPL00 BATTERY PACK,LI-ION SBPL0085603 Without Color D
,PRISMATIC ,43x34x46 , ,ALLTEL SILVER ,Innerpack
,CMW Bar
Copyright © 2008 LG Electronics. Inc. All right reserved. - 175 - LGE Internal Use Only
Only for training and service purposes
Note
Note