Professional Documents
Culture Documents
Product Specifications 40" WXGA Color TFT-LCD Module Model Name: T400XW01 V5
Product Specifications 40" WXGA Color TFT-LCD Module Model Name: T400XW01 V5
com
Product Specifications
() Preliminary Specifications
(*) Final Specifications
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Contents
No
CONTENTS 2
RECORD OF REVISIONS 3
1 GENERAL DESCRIPTION 4
2 ABSOLUTE MAXIMUM RATINGS 5
3 ELECTRICAL SPECIFICATIONS 6
3-1 ELECTRICAL CHARACTERISTICS 6
3-2 INTERFACE CONNECTIONS 7
3-3 BALANCE BOARD UNITS 9
3-4 SIGNAL TIMING SPECIFICATION 11
3-5 SIGNAL TIMING WAVEFORMS 12
3-6 COLOR INPUT DATA ASSIGNMENT 13
3-7 POWER SEQUENCE of LCD MODULE 14
4 OPTICAL SPECIFICATIONS 16
5 MECHANICAL CHARACTERISTICS 19
6 RELIABLITY 22
7 INTERNATIONAL STANDARDS 23
7-1 SAFETY 23
7-2 EMC 23
8 PACKING 24
8-1 DEFINITION OF LABEL 24
8-2 PACKING METHOD 25
9 PRECAUTIONS 26
9-1 MOUNTING PRECAUTIONS 26
9-2 OPERATING PRECAUTIONS 26
9-3 ELECTROSTATIC DISCHARGE CONTROL 27
9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE 27
9-5 STORAGE 27
9-6 HANDLING PRECAUTIONS FOR PROTECTION FILM 27
©Copyright AU Optronics, Inc. 2
Oct, 2007 All Rights Reserved. T400XW01 V5
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Record of Revision
Version Date No Old Description New Description Remark
0.0 11/27/07 First release
0.05 12/17/07 Align spec format with other
models
1.0 12/26/07 Final spec.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
1. General Description
This specification applies to the 40.0 inch Color TFT-LCD Module T400XW01 V5. This
LCD module has a TFT active matrix type liquid crystal panel 1366x768 pixels, and diagonal
size of 40.0 inch. This module supports 1366x768 HD-Ready mode.
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in
vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit
gray scale signal for each dot.
The T400XW01 V5 has been designed to apply the 8-bit 1 channel LVDS interface method.
It is intended to support displays where high brightness, wide viewing angle, high color
saturation, and high color depth are very important.
The T400XW01 V5 model is RoHS verified which can be distinguished on panel label.
* General Information
Items Specification Unit Note
Active Screen Size 40.00 inch
Display Area 885.168(H) x 497.66(V) mm
Outline Dimension 952.0(H) x 551.0 (V) x 53.2(D) mm With Balance board cover
Driver Element a-Si TFT active matrix
Display Colors 8 bit, 16.7M Colors
Number of Pixels 1366 x 768 Pixel
Pixel Pitch 0.648(H) x 0.648(W) mm
Pixel Arrangement RGB vertical stripe
Display Operation Mode Normally Black
Surface Treatment 3H, Total Haze = 11%
RoHS RoHS compliance
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3. Electrical Specification
The T400XW01 V5 requires two power inputs.
1.1st input power: for TFT-LCD Module driving.
2.2nd input power: for the BLU driving, (powered inverter)
CMOS Input High Threshold Voltage VIH (High) 2.7 3.3 Vdc
Interface Input Low Threshold Voltage VIL (Low) 0 0.6 Vdc
Backlight Power Consumption PDDB 160 170 180 Watt [5]
Life Time LL 50000 Hours [6]
Note:
4. VCIM = 1.2 V
VTH
VCIM
VTL
0V
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Note:
z Note 1: All GND (ground) pins should be connected together and should also be connected to the LCD’s
metal frame.
z Note 2: All VDD (power input) pins should be connected together.
z Note 3: All NC (no connection) pins should be open without voltage input.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Clock
RIN0+ R3 R2 G2 R7 R6 R5 R4 R3 R2 G2
RIN0-
RIN1+ G4 G3 B3 B2 G6 G5 G4 G3 B3
G7
RIN1-
RIN2+
B5 B4 DE NA NA B7 B6 B5 B4 DE
RIN2-
RIN3+ R1 R0 NA B1 B0 G1 G0 R1 R0 NA
RIN3-
Î NS Format
2. LVDS Option = H (3.3V) or N.C.Î
Previous Cycle Current Cycle Next Cycle
Clock
RIN0+ R1 R0 G0 R5 R4 R3 R2 R1 R0 G0
RIN0-
RIN1+ G2 G1 B1 B0 G5 G4 G3 G2 G1 B1
RIN1-
RIN2+
B3 B2 DE NA NA B5 B4 B3 B2 DE
RIN2-
RIN3+ R7 R6 NA B7 B6 G7 G6 R7 R6 NA
RIN3-
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Feedback connector
Lamp connector
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
This is the signal timing required at the input of the User connector. All of the interface signal timing should be
satisfied with the following specifications for it’s proper operation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
12
Tv
Tblk(v) Tdisp(v)
Th
DE
RGB
N Invalid Data 1 2 3 4 N Invalid Data
Data
Line Line Line Line Line Line
www.panelook.com
T400XW01 V5
CLK
Th
Tclk
Tdisp(h) Tblk(h)
DE
Global LCD Panel Exchange Center
GREEN GREEN(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0
----
GREEN(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0
GREEN(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
BLUE(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
BLUE(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
BLUE
-------
BLUE(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0
BLUE(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
90% 90%
10% 10%
Power Supply for LCD
t1 t2 t5 t6 t7
Valid Data
Signal
t3 t4
Lamp ON
Backlight
Values
Units
Parameter Min. Typ. Max.
t1 0.4 30 ms
t2 0.1 50 ms
t3* 200 ms
t4 10 ms
t5 0.1 50 ms
t6 300 ms
t7 300 ms
Note:
The timing controller will not be damaged in case of TV set AC input power suddenly shut down.
Once power reset, it should follow power sequence as spec. definition.
(1) Apply the lamp voltage within the LCD operation range. When the back-light turns on before the LCD
operation or the LCD turns off before the back-light turns off, the display may momentarily become
abnormal screen.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
4. Optical Specification
Optical characteristics are determined after the unit has been “ON” and stable for approximately
45 minutes in a dark environment at 25oC. The values specified are at an approximate distance
ӥ Ӱ
50cm from the LCD surface at a viewing angle of and equal to 0 . ̓
Fig. 1 presents additional information concerning the measurement equipment and method.
Note:
1. Contrast Ratio (CR) is defined mathematically as:
Surface Luminance with all white pixels
Contrast Ratio= Surface Luminance with all black pixels
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
2. Surface luminance is luminance value at point 1 across the LCD surface 50cm from the surface with
all pixels displaying white. From more information see FIG 2.
FIG. 2 Luminance
The response time is defined as the following figure and shall be measured by switching the input signal for
“any level of gray(bright) “ and “any level of gray(dark)”.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
˟˃ʿ˄ˈʿ˟ˆ˄ʿΞˁ˟˅ˈˈ ˟˃ʿ˄ˈʿ˟ˆ˄ʿΞˁ˟˅ˈˈ
ˣ˻̂̇̂˷˸̇˸˶̇̂̅ʳ
ˢ̈̇̃̈̇
˟˃ʿ˄ˈʿ˟ˆ˄ʿΞˁ˟˅ˈˈ
˧˼̀˸
TrR
5 . Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the
horizontal (or x-axis) and the vertical (or y-axis) with respect to the z-axis which is normal to the LCD
surface. For more information see Fig. 4-3.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
5. Mechanical Characteristics
The contents provide general mechanical characteristics for the model T400XW01 V5. Detailed mechanical
drawings are shown in the following pages.
Horizontal 952.0 mm
Outline Dimension Vertical 551.0 mm
Depth 53.2 mm(with balance board cover)
Bezel Opening Horizontal 891.7 mm
Vertical 504.2 mm
Horizontal 885.168mm
Active Display Area
Vertical 497.664 mm
Weight 11500g (Typ.)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Mechanical Figure:
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
6. Reliability
Environment test condition:
Height: 46cm
8 Drop (With carton) 3 1 corner, 3 edges, 6 surfaces
(ASTMD4169-I)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
7. International Standard
7-1 Safety
(1) UL1950 Third Edition, Underwriters Laboratories, Inc. Jan. 28, 1995
Standard for Safety of Information Technology Equipment Including electrical Business
Equipment.
(2) CAN/CSA C22.2 No. 950-95/60950 Third Edition, Canadian Standards Association,
Standard for Safety of Information Technology Equipment Including Electrical Business
Equipment.
(3) EN60950: 1992+A2: 1993+A2: 1993+C3: 1995+A4: 1997+A11: 1997
IEC 950: 1991+A1: 1992+A2: 1993+C3: 1995+A4:1996
European Committee for Electrotechnical Standardization (CENELEC)
EUROPEAN STANDARD for Safety of Information Technology Equipment Including
Electrical Business Equipment.
7-2 EMC
a) ANSI C63.4 “Methods of Measurement of Radio-Noise Emissions from Low-Voltage
Electrical and Electrical Equipment in the Range of 9kHz to 40GHz. “American National
standards Institute(ANSI), 1992
b) C.I.S.P.R “Limits and Methods of Measurement of Radio Interface Characteristics of
Information Technology Equipment.” International Special committee on Radio
Interference.
c) EN 55022 “Limits and Methods of Measurement of Radio Interface Characteristics of
Information Technology Equipment.” European Committee for Electrotechnical
Standardization. (CENELEC), 1998
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
8. Packing
B. Carton Label:
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
9. PRECAUTIONS
Please pay attention to the followings when you use this TFT LCD module.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
9-5 STORAGE
When storing modules as spares for a long time, the following precautions are necessary.
(1) Store them in a dark place. Do not expose the module to sunlight or
fluorescent light. Keep the temperature between 5 кand 35 к
at normal
humidity.
(2) The polarizer surface should not come in contact with any other object. It is
recommended that they be stored in the container in which they were
shipped.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com