Professional Documents
Culture Documents
Pall Water - IMPRO - CCRO Skid System
Pall Water - IMPRO - CCRO Skid System
Reverse Osmosis
Programmable logic controller with remote monitoring and Rejection 95.0 — 99.5%
control functionality
Adjustable Flux 6 — 25 gfd (10 — 42 lmh)
Chemical dosing systems
Feed TDS 0 — 10,000 mg/L
NSF-certified components
Temperature 36 to 113 deg F (2 to 45
deg C)
O P T I O N A L F E AT U R E S
Maximum Pressure 450 psi (31 bar)
Membrane pretreatment
Inlet Pressure 10 — 60 psi (0.8 — 4.0
Clean-in-Place (CIP) and flushing systems bar)
T H E I M P R O I S AVA I L A B L E I N A VA R I E T Y O F S TA N D A R D S K I D - M O U N T E D
C O N F I G U R AT I O N S
Model Average Permeate Flow Maximum Permeate Flow Number of Elements
(gpm [m /hr])
3
(gpm [m /hr])
3
Pall Water has installations all over the globe. To speak to a Pall Water
representative in your area, please go to www.pallwater.com.
Americas: +1 (866) 475.0115 Because of technological developments related to the products, systems, and/or services
EMEA: +49 (0) 671 79610 325 described herein, the data and procedures are subject to change without notice. Please consult
APAC: +61 (0)2 4340 8900 your local representative to verify that this information remains valid.
@Pall_Water | company/pallwater | info@pallwater.com © Copyright 2017, Pall Corporation. Pall, and Aria are trademarks of Pall Corporation. ® Indicates a
trademark registered in the USA. ™ is a common law mark in the USA and is a service mark of Pall
pallwater.com Corporation. Document ID: PWIMPROSKIDDSb.