Professional Documents
Culture Documents
Felix The Fox - Clean.compressed
Felix The Fox - Clean.compressed
Felix The Fox - Clean.compressed
Size
The finished toy is approx. 6 inches high on the condition of using specified materials.
Materials and tools
Yarn of an average thickness (4 PLY): orange, white, graphite (you may use chocolate or
black yarn instead) and blue colors.
Scissors.
We need two 12-17mm flat buttons and strong thread (for example “Iris” yarn or nylon
Abbreviations
MR- magic ring (instead of magic ring, you may work 2 chain stitches and crochet into the
2nd stitch from the hook)
ch- chain stitch
slst- slip stitch
sc- single crochet
inc- increase (crochet 2 sc in one stitch)
dec- invisible decrease (crochet 2 sc together using invisible method)
FLO –front loops only
BLO –back loops only
(2 sc, dec) * n —repeat the pattern between parentheses n times
(36) —number of stitches in a round
Fold the part in half, connecting the upper edges and work 2sc through both edges.
Body
Work 6 ch and join another leg using
sl st.
tail.
*2sc together with tail — it means, that you work together two layers — one of tail and
one of previous round, grabbing with the hook a
stitch of tail and a stitch of body. You work 2
such stitches.
(24)
Additional part
If you don’t want to make movable head, then you don’t need this
part. You may just sew the head to the body then.
Round 6: 4sc, (inc, sc)*4, 4sc (20) Change the color to orange.
Round 7: 4sc, (2sc, inc)*4, 4sc (24) Round 8: 4sc, (inc, 3sc)*4, 4sc (28)
If you use safety eyes, put them now. I placed the eyes between 8-th and 9-th rounds
so that the distance between them is 16 stitches.
Put the round piece and the button inside the body and sew the detail to the body in a
circle.
Leaving the jointing threads outside.
Try on the head to the body.
And find the point on the head where it will be attached. I marked this place with a
white pin (see photo on the right) symmetrically in the bottom of the head, in the 12th
round.
Take the remaining thread ends from the body and pull them inside the head at that
point.
Round 20: (4sc, dec)*6 (30) Round 21: (3sc, dec)*6 (24) Round 22: (2sc, dec)*6 (18)
Ears (2 pieces)
Orange part:
Crochet and turn at the end of each row.
Row 1: MR, 1 sc (1)
Row 2: ch, inc (2)
Row 3: ch, sc, inc (3)
Row 4: ch, 2 sc, inc (4)
Row 5: ch, 3 sc, inc (5)
Work single crochets along two side edges: ch, 5 sc along one edge, 2 ch (the tip of the
ear), 5 sc along another edge.
Cut off yarn leaving a long tail for sewing. Make
two such pieces.
White part:
Round 1: 6 sc in MR, sl st (6)
Cut off yarn leaving a long tail for
sewing. Make two such pieces.
Back view
Assembly and decoration
Bend the ears slightly and pin them to the head symmetrically in desired position.
Then sew them.
Embroider a nose with graphite yarn or black DMC floss (using 4-6 strands). Make 3-4
horizontal stitches.
Embroider a vertical line on the muzzle with black DMC floss (using 1-2 strands).
Tighten eye sockets with the yarn tail you left while crocheting the head.
Mark the eye sockets using pins. I placed the eyes
between 8-th and 9-th rounds so that the distance
between them is 16 stitches.
Bring the needle out where the first eye will be placed.
Make a little stitch, bringing the needle out where the
second eye will be placed. Again make a little stitch,
bringing the needle out to the first eye place. Tighten
yarn lightly to create small deepenings where the eyes will
be placed. Fasten and hide yarn tail.
Turn your crocheting and from now on you have to work all
the rows like this:
ch, BLO 10sc, turn.
Put the collar on the fox, tighten and tie the straps like a
bow-knot. Then bend down the upper edge of the collar .
Congratulations, your Felix the fox is ready!))