Professional Documents
Culture Documents
Aluminum Foil Container Production Line Detail
Aluminum Foil Container Production Line Detail
1. High performance presses are widely used in the fields of aeronautics, auto, and agriculture
Machines, electric machines, apparatuses and meters, medical equipment, electrical home appliance and
hardware.
4. Square figure long guide with six friction faces makes abrasion resistant and punching
Precision.
5. Combined pneumatic clutch and brake are made of friction material, which means long service
Life.
6. Closed gear-driven, dipped in lube, which drives stably with low noise.
7. Slide with counter balance, which will eliminate the clearance and improve the stability and
Precision.
8. Intermittent auto lubrication makes every point get fine and safe lubrication. Thus, long
Service life is saved.
Function:
It is served for collecting the aluminum foil container during the production in
order to prevent the products being off the making line.
L: 1500mm
W: maximum 600 mm (belt width: 500mm)
H: adjustable 800mm-1200mm
SPEED ADJUSTABLE: 0-5m
Voltage 220V/50Hz
4. Air compressor
Feature:
Model SV054-105
Rated Power 5.5HP/4000W
Voltage 220V
Speed 1030rpm
Noise ≤95db
Exhaust Volume 600L/min
Rated Pressure 0.8Mpa/8bar
Tank Volume 105L
Net Weight 112kg
Net Dimension 1280x560x1020mm
5. Mould
5.1 Container mold
6. Frequency converter
A frequency converter is a power conversion device. The frequency
converter converts a basic fixed-frequency, fixed voltage sine-wave
power (line power) to a variable-frequency, variable-voltage output
used to control speed of induction motors
7. Light curtains
The light beams emitted from the transmitter are sequenced, one after the other, and pulsed at a
specific frequency. The receiver is designed to only accept the specific pulse and frequency from
its dedicated transmitter. This enables the rejection of spurious infrared light and thus enhances
their suitability as components within a safety system.
Typically, light curtains are connected to a safety relay which will remove motive power from
the hazard in the event that an object is detected. Safety relays can be provided with muting
functionality which enables the temporary disabling of the safety function to allow objects to
pass through the light curtains without tripping the safety relay. This is particularly useful for
machinery which has some semi-automatic procedures.